| | | CurrentVerticalTiltAngle | Number, Dimmer | Number Item = current angle of vertical slats (-90 to +90) . Dimmer Item = the percentage of openness (0%-100%) |
| | | TargetVerticalTiltAngle | Number, Dimmer | Number Item = target angle of vertical slats. Dimmer Item = the percentage of openness (0%-100%) |
| Slat | | | | Slat which tilts on a vertical or a horizontal axis. Configuration "type:horizontal" or "type:vertical" |
-| | CurrentSlatState | | String | Current slat state. possible values (FIXED,SWINGING,JAMMED). Custom mapping can be defined at item level, e.g. [JAMMED="JAM", FIXED="FIX"] |
+| | CurrentSlatState | | String | Current slat state. possible values (FIXED,SWINGING,JAMMED). Custom mapping can be defined at item level, e.g. [JAMMED="JAM", FIXED="FIX"] |
| | | Name | String | Name of the slat |
| | | SwingMode | Number, Switch | Swing mode. values: 0/OFF=SWING DISABLED, 1/ON=SWING ENABLED |
| | | CurrentTiltAngle | Number, Dimmer | Number Item = current angle of slats. values -90 to 90. A value of 0 indicates that the slats are rotated to a fully open position. Dimmer Item = the percentage of openness (0%-100%) |
| Fan | | | | Fan |
| | ActiveStatus | | Switch | Accessory current working status. A value of "ON"/"OPEN" indicates that the accessory is active and is functioning without any errors. |
| | | CurrentFanState | Number | Current fan state. values: 0=INACTIVE, 1=IDLE, 2=BLOWING AIR |
-| | | TargetFanState | Number, Switch | Target fan state. values: 0/OFF=MANUAL, 1/ON=AUTO. Flag [inverted=true] swaps the default mapping |
-| | | RotationDirection | Number, Switch | Rotation direction. values: 0/OFF=CLOCKWISE, 1/ON=COUNTER CLOCKWISE. Flag [inverted=true] swaps the default mapping |
+| | | TargetFanState | Number, Switch | Target fan state. values: 0/OFF=MANUAL, 1/ON=AUTO. Flag [inverted=true] swaps the default mapping |
+| | | RotationDirection | Number, Switch | Rotation direction. values: 0/OFF=CLOCKWISE, 1/ON=COUNTER CLOCKWISE. Flag [inverted=true] swaps the default mapping |
| | | RotationSpeed | Number, Dimmer | Fan rotation speed in % (1-100) |
-| | | SwingMode | Number, Switch | Swing mode. values: 0/OFF=SWING DISABLED, 1/ON=SWING ENABLED. Flag [inverted=true] swaps the default mapping |
-| | | LockControl | Number, Switch | Status of physical control lock. values: 0/OFF=CONTROL LOCK DISABLED, 1/ON=CONTROL LOCK ENABLED.Flag [inverted=true] swaps the default mapping |
+| | | SwingMode | Number, Switch | Swing mode. values: 0/OFF=SWING DISABLED, 1/ON=SWING ENABLED. Flag [inverted=true] swaps the default mapping |
+| | | LockControl | Number, Switch | Status of physical control lock. values: 0/OFF=CONTROL LOCK DISABLED, 1/ON=CONTROL LOCK ENABLED.Flag [inverted=true] swaps the default mapping |
| Thermostat | | | | A thermostat requires all mandatory characteristics defined below |
| | CurrentTemperature | | Number | Current temperature. supported configuration: minValue, maxValue, step |
| | TargetTemperature | | Number | Target temperature. supported configuration: minValue, maxValue, step |
| | | Name | String | Name of the thermostat |
| | | CoolingThresholdTemperature | Number | Maximum temperature that must be reached before cooling is turned on. min/max/step can configured at item level, e.g. minValue=10.5, maxValue=50, step=2] |
| | | HeatingThresholdTemperature | Number | Minimum temperature that must be reached before heating is turned on. min/max/step can configured at item level, e.g. minValue=10.5, maxValue=50, step=2] |
+| | | RelativeHumidity | Number | Relative humidity in % between 0 and 100. |
| HeaterCooler | | | | Heater or/and cooler device |
| | ActiveStatus | | Switch | Accessory current working status. A value of "ON"/"OPEN" indicates that the accessory is active and is functioning without any errors. |
| | CurrentTemperature | | Number | Current temperature. supported configuration: minValue, maxValue, step |
| | | LockControl | Number, Switch | Status of physical control lock. values: 0/OFF=CONTROL LOCK DISABLED, 1/ON=CONTROL LOCK ENABLED |
| | | CoolingThresholdTemperature | Number | Maximum temperature that must be reached before cooling is turned on. min/max/step can configured at item level, e.g. minValue=10.5, maxValue=50, step=2] |
| | | HeatingThresholdTemperature | Number | Minimum temperature that must be reached before heating is turned on. min/max/step can configured at item level, e.g. minValue=10.5, maxValue=50, step=2] |
-| Lock | | | | A Lock Mechanism. with flag [inverted=true] the default mapping to switch ON/OFF can be inverted. |
+| Lock | | | | A Lock Mechanism. with flag [inverted=true] the default mapping to switch ON/OFF can be inverted. |
| | LockCurrentState | | Switch, Number | Current state of lock mechanism (1/ON=SECURED, 0/OFF=UNSECURED, 2=JAMMED, 3=UNKNOWN) |
| | LockTargetState | | Switch | Target state of lock mechanism (ON=SECURED, OFF=UNSECURED) |
| | | Name | String | Name of the lock |
| | | LockTargetState | Switch | target states of lock mechanism (OFF=SECURED, ON=UNSECURED) |
| Battery | | | | Accessory with battery. Battery can be chargeable (configuration chargeable:true) and non-chargeable (configuration chargeable:false) |
| | BatteryLevel | | Number | Battery level 0% to 100% |
-| | BatteryLowStatus | | Switch, Contact, Number | Battery low indicator. ON/OPEN = battery level is low; for number if the value is below the lowThreshold, then it is low. Default is 20. |
+| | BatteryLowStatus | | Switch, Contact, Number | Battery low indicator. ON/OPEN = battery level is low; for number if the value is below the lowThreshold, then it is low. Default is 20. |
| | BatteryChargingState | | Switch, Contact | Mandatory only for chargeable battery. ON/OPEN = battery is charging |
| | | Name | String | Name of the battery accessory |
| Filter | | | | Accessory with filter maintenance indicator |
import io.github.hapjava.characteristics.impl.fan.TargetFanStateEnum;
import io.github.hapjava.characteristics.impl.filtermaintenance.FilterLifeLevelCharacteristic;
import io.github.hapjava.characteristics.impl.filtermaintenance.ResetFilterIndicationCharacteristic;
+import io.github.hapjava.characteristics.impl.humiditysensor.CurrentRelativeHumidityCharacteristic;
import io.github.hapjava.characteristics.impl.lightbulb.BrightnessCharacteristic;
import io.github.hapjava.characteristics.impl.lightbulb.ColorTemperatureCharacteristic;
import io.github.hapjava.characteristics.impl.lightbulb.HueCharacteristic;
put(VOLUME, HomekitCharacteristicFactory::createVolumeCharacteristic);
put(COOLING_THRESHOLD_TEMPERATURE, HomekitCharacteristicFactory::createCoolingThresholdCharacteristic);
put(HEATING_THRESHOLD_TEMPERATURE, HomekitCharacteristicFactory::createHeatingThresholdCharacteristic);
+ put(RELATIVE_HUMIDITY, HomekitCharacteristicFactory::createRelativeHumidityCharacteristic);
put(REMAINING_DURATION, HomekitCharacteristicFactory::createRemainingDurationCharacteristic);
put(OZONE_DENSITY, HomekitCharacteristicFactory::createOzoneDensityCharacteristic);
put(NITROGEN_DIOXIDE_DENSITY, HomekitCharacteristicFactory::createNitrogenDioxideDensityCharacteristic);
value = ((PercentType) state).doubleValue();
} else if (state instanceof DecimalType) {
value = ((DecimalType) state).doubleValue();
+ } else if (state instanceof QuantityType) {
+ value = ((QuantityType) state).doubleValue();
}
return CompletableFuture.completedFuture(value);
};
getUnsubscriber(taggedItem, HEATING_THRESHOLD_TEMPERATURE, updater));
}
+ private static CurrentRelativeHumidityCharacteristic createRelativeHumidityCharacteristic(
+ HomekitTaggedItem taggedItem, HomekitAccessoryUpdater updater) {
+ return new CurrentRelativeHumidityCharacteristic(getDoubleSupplier(taggedItem, 0.0),
+ getSubscriber(taggedItem, RELATIVE_HUMIDITY, updater),
+ getUnsubscriber(taggedItem, RELATIVE_HUMIDITY, updater));
+ }
+
private static OzoneDensityCharacteristic createOzoneDensityCharacteristic(final HomekitTaggedItem taggedItem,
HomekitAccessoryUpdater updater) {
return new OzoneDensityCharacteristic(
projects / openhab-addons.git / commitdiff