offline.protocols-starting = Protocolli Iniziali
offline.googletv-address-not-specified = indirizzo googletv non specificato
offline.shieldtv-address-not-specified = indirizzo shieldtv non specificato
+offline.error-initalizing-keystore = Errore nell'inizializzare il keystore
+offline.key-unrecoverable-with-supplied-password = Chiave non recuperabile con password fornita
+offline.unknown-host = Host sconosciuto
+offline.invalid-port-number = Numero porta non valido
+offline.pin-process-incomplete = Processo Pin Incompleto
+offline.error-opening-ssl-connection-check-log = Errore nell'apertura della connessione SSL. Controlla il registro.
+offline.initializing = Inizializzazione
+offline.reconnecting = Riconnessione
+offline.communication-error-will-try-to-reconnect = Errore di comunicazione, proverà a riconnettersi
+offline.interrupted = Interrotto
+offline.io-error = Errore I/O
+offline.runtime-exception = Eccezione di esecuzione
+offline.user-forced-pin-process = Processo Pin Forzato Dall'Utente
+offline.unknown = Sconosciuto
+online.online = Online
--- /dev/null
+# add-on
+
+addon.anthem.name = Extension Anthem
+addon.anthem.description = Il s'agit de l'extension pour les préamplis/processeurs Audio Vidéo Anthem
+
+# thing types
+
+thing-type.anthem.anthem.label = Anthem
+thing-type.anthem.anthem.description = Processeur Audio Vidéo Anthem
+thing-type.anthem.anthem.group.1.label = Zone Principale
+thing-type.anthem.anthem.group.1.description = Contrôle la zone 1 (la zone principale) du processeur
+thing-type.anthem.anthem.group.2.label = Zone 2
+thing-type.anthem.anthem.group.2.description = Contrôle la zone 2 du processeur
+
+# thing types config
+
+thing-type.config.anthem.anthem.commandDelayMsec.label = Délai de commande
+thing-type.config.anthem.anthem.commandDelayMsec.description = L'intervalle entre les commandes envoyées au processeur (en millisecondes)
+thing-type.config.anthem.anthem.host.label = Adresse réseau
+thing-type.config.anthem.anthem.host.description = Nom d'hôte ou adresse IP du processeur Audio Vidéo Anthem
+thing-type.config.anthem.anthem.port.label = Port réseau
+thing-type.config.anthem.anthem.port.description = Numéro de port réseau du processeur Audio Vidéo Anthem
+thing-type.config.anthem.anthem.reconnectIntervalMinutes.label = Intervalle de reconnexion
+thing-type.config.anthem.anthem.reconnectIntervalMinutes.description = Temps d'attente entre les tentatives de reconnexion (en minutes)
+
+# channel group types
+
+channel-group-type.anthem.general.label = Contrôle général
+channel-group-type.anthem.general.description = Canaux généraux pour ce récepteur audio vidéo
+channel-group-type.anthem.zone.label = Contrôle de zone
+channel-group-type.anthem.zone.description = Canaux pour une zone de ce processeur
+
+# channel types
+
+channel-type.anthem.activeInput.label = Entrée Active
+channel-type.anthem.activeInput.description = Sélectionne la source d'entrée active
+channel-type.anthem.activeInputLongName.label = Nom Complet Entrée Active
+channel-type.anthem.activeInputLongName.description = Nom complet convivial de la source d'entrée active
+channel-type.anthem.activeInputShortName.label = Nom Abrégé Entrée Active
+channel-type.anthem.activeInputShortName.description = Nom abrégé convivial de la source d'entrée active
+channel-type.anthem.command.label = Commande
+channel-type.anthem.command.description = Envoie une commande personnalisée au processeur
+channel-type.anthem.volumeDB.label = Volume dB
+channel-type.anthem.volumeDB.description = Définit le niveau de volume entre -90 et 0 dB
+
+# thing status detail messages
+
+thing-status-detail-connecting = Connexion en cours
+thing-status-detail-unknownhost = Hôte inconnu
+thing-status-detail-invalidport = Numéro de port invalide
+thing-status-detail-openerror = Erreur lors de l'ouverture de la connexion Anthem. Vérifiez le journal
+thing-status-detail-interrupted = Interrompu
+thing-status-detail-ioerror = Erreur E/S
+thing-status-detail-invalidconfig = Configuration d'objet Anthem invalide
--- /dev/null
+# thing types
+
+thing-type.bluetooth.radoneye_rd200.label = RD200 RadonEye
+thing-type.bluetooth.radoneye_rd200.description = Détecteur intérieur de radon
+
+# thing types config
+
+thing-type.config.bluetooth.radoneye_rd200.address.label = Adresse
+thing-type.config.bluetooth.radoneye_rd200.address.description = Adresse Bluetooth au format XX\:XX\:XX\:XX\:XX\:XX\:XX
+thing-type.config.bluetooth.radoneye_rd200.fwVersion.label = Version du firmware
+thing-type.config.bluetooth.radoneye_rd200.fwVersion.description = La version majeure du firmware de l'appareil.
+thing-type.config.bluetooth.radoneye_rd200.refreshInterval.label = Intervalle d'actualisation
+thing-type.config.bluetooth.radoneye_rd200.refreshInterval.description = Indique la fréquence de mise à jour en secondes.
+
+# channel types
+
+channel-type.bluetooth.radoneye_radon.label = Niveau Actuel Radon
+channel-type.bluetooth.radoneye_radon.description = Niveau de gaz radon
channel-type.config.energidataservice.datahub-price.chargeTypeCodes.description = Elenco separato da virgole dei codici del tipo di carica.
channel-type.config.energidataservice.datahub-price.notes.label = Filtri Note
channel-type.config.energidataservice.datahub-price.notes.description = Elenco di note separato da virgole.
+channel-type.config.energidataservice.datahub-price.offset.label = Scostamento Data
+channel-type.config.energidataservice.datahub-price.offset.description = Scostamento data inizio query espresso come durata ISO 8601.
channel-type.config.energidataservice.datahub-price.start.label = Data Inizio Query
channel-type.config.energidataservice.datahub-price.start.description = Parametro della data di inizio dell'interrogazione espresso come YYYY-MM-DD o dinamicamente come uno di StartOfDay, StartOfMonth o StartOfYear.
channel-type.config.energidataservice.datahub-price.start.option.StartOfDay = Giorno di inizio
thing-type.config.mail.smtp.sender.label = Expéditeur
thing-type.config.mail.smtp.sender.description = Adresse par défaut de l'expéditeur de l'e-mail
-config.hostname.label = Nom d'hôte du serveur
-config.password.label = Mot de passe du serveur SMTP
-config.port.label = Port du serveur
-config.refresh.label = Fréquence de rafraîchissement
-config.refresh.description = Fréquence de rafraîchissement de ce compte en secondes
-config.security.label = Protocole de sécurité du serveur SMTP
-config.security.option.PLAIN = Aucun
-config.security.option.STARTTLS = STARTTLS
-config.security.option.SSL = SSL/TLS
-config.username.label = Nom d'utilisateur du serveur SMTP
-
# channel types
+channel-type.mail.content.label = Contenu
+channel-type.mail.content.description = Contenu du courrier sous forme de chaine de caractères (avec le filtre sujet et la transformation du contenu).
channel-type.mail.mailcount.label = Nombre Courriers
channel-type.mail.mailcount.description = Nombre d'e-mails dans le dossier
# channel types config
+channel-type.config.mail.content.folder.label = Nom du dossier
+channel-type.config.mail.content.markAsRead.label = Marquer comme Lu
+channel-type.config.mail.content.markAsRead.description = Marquer un courrier traité comme lu et en empêcher le traitement ultérieur.
+channel-type.config.mail.content.sender.label = Filtre sur l'Expéditeur
+channel-type.config.mail.content.sender.description = Un filtre (expression régulière) pour l'adresse de l'expéditeur du courriel.
+channel-type.config.mail.content.subject.label = Filtre de Sujet
+channel-type.config.mail.content.subject.description = Un filtre (expression régulière) pour le sujet du mail.
+channel-type.config.mail.content.transformation.label = Transformation
+channel-type.config.mail.content.transformation.description = Motif de transformation utilisé lors du traitement des messages. Les transformations multiples peuvent être enchaînées en utilisant "∩".
channel-type.config.mail.mailcount.folder.label = Nom de dossier
channel-type.config.mail.mailcount.type.label = Type de compteur
channel-type.config.mail.mailcount.type.option.UNREAD = Non lus
channel-type.config.mail.mailcount.type.option.TOTAL = Tous
+# thing types config
+
+config.hostname.label = Nom d'hôte du serveur
+config.password.label = Mot de passe du serveur SMTP
+config.port.label = Port du serveur
+config.refresh.label = Fréquence de rafraîchissement
+config.refresh.description = Fréquence de rafraîchissement de ce compte en secondes
+config.security.label = Protocole de sécurité du serveur SMTP
+config.security.option.PLAIN = Aucun
+config.security.option.STARTTLS = STARTTLS
+config.security.option.SSL = SSL/TLS
+config.username.label = Nom d'utilisateur du serveur SMTP
+
# actions
addHeaderActionLabel = ajouter un en-tête au mail
channel-group-type.netatmo.energy.channel.end.label = Fin Mode
channel-group-type.netatmo.energy.channel.end.description = Heure de fin de la consigne actuellement appliquée.
channel-group-type.netatmo.humidity.label = Humidité
+channel-group-type.netatmo.last-event-alarm.label = Dernier événement
+channel-group-type.netatmo.last-event-alarm.channel.time.label = Horodatage Événement
+channel-group-type.netatmo.last-event-alarm.channel.time.description = Moment où l'événement s'est produit.
channel-group-type.netatmo.last-event-doorbell.label = Dernier événement
channel-group-type.netatmo.last-event-doorbell.channel.local-video-url.label = URL Locale Vidéo
channel-group-type.netatmo.last-event-doorbell.channel.local-video-url.description = URL locale de l'enregistrement de l'événement.
channel-group-type.netatmo.last-event-person.channel.snapshot-url.description = URL de la photo du dernier événement de cette personne.
channel-group-type.netatmo.last-event-person.channel.time.label = Horodatage Personne
channel-group-type.netatmo.last-event-person.channel.time.description = Moment du dernier événement de cette personne.
-channel-group-type.netatmo.last-event-smoke.label = Dernier événement
-channel-group-type.netatmo.last-event-smoke.channel.time.label = Horodatage Événement
-channel-group-type.netatmo.last-event-smoke.channel.time.description = Moment où l'événement s'est produit.
channel-group-type.netatmo.last-event.label = Dernier événement
channel-group-type.netatmo.last-event.channel.local-video-url.label = URL Locale Vidéo
channel-group-type.netatmo.last-event.channel.local-video-url.description = URL locale de l'enregistrement de l'événement.
channel-group-type.netatmo.rain.channel.sum-1.description = Quantité d'eau au cours de la dernière heure.
channel-group-type.netatmo.rain.channel.sum-24.label = Pluie 24h
channel-group-type.netatmo.rain.channel.sum-24.description = Quantité d'eau durant la journée en cours.
+channel-group-type.netatmo.security-event.label = Événement Sécurité de la Maison
channel-group-type.netatmo.security.label = Sécurité de la maison
channel-group-type.netatmo.setpoint.label = Consigne
channel-group-type.netatmo.setpoint.channel.end.label = Fin Consigne
channel-group-type.netatmo.sub-event-doorbell.channel.vignette.description = Vignette de la capture.
channel-group-type.netatmo.sub-event-doorbell.channel.vignette-url.label = URL Vignette
channel-group-type.netatmo.sub-event-doorbell.channel.vignette-url.description = URL de la vignette.
+channel-group-type.netatmo.sub-event.label = Sous-événement
+channel-group-type.netatmo.sub-event.channel.time.label = Horodatage Sous-Événement
+channel-group-type.netatmo.sub-event.channel.time.description = Moment où le sous-événement s'est produit.
+channel-group-type.netatmo.sub-event.channel.vignette.label = Vignette
+channel-group-type.netatmo.sub-event.channel.vignette.description = Vignette de la capture.
+channel-group-type.netatmo.sub-event.channel.vignette-url.label = URL Vignette
+channel-group-type.netatmo.sub-event.channel.vignette-url.description = URL de la vignette.
channel-group-type.netatmo.tag.label = Détecteur d'ouverture
channel-group-type.netatmo.temperature-extended.label = Température
channel-group-type.netatmo.temperature-extended.channel.max-time.label = Horodatage Max Aujourd'hui
channel-type.netatmo.avatar-picture.description = Avatar de cette personne.
channel-type.netatmo.battery-status.label = État Batterie
channel-type.netatmo.battery-status.description = Description de l'état de la batterie.
-channel-type.netatmo.camera-event.label = Événement Caméra
channel-type.netatmo.camera-id.label = ID Caméra
channel-type.netatmo.camera-id.description = ID de la caméra qui a déclenché l'événement.
channel-type.netatmo.co2.label = CO2
channel-type.netatmo.event-subtype.state.option.MOVEMENT_ANIMAL = Animal détecté
channel-type.netatmo.event-subtype.state.option.SOUND_TEST_OK = Test d'alarme réussi
channel-type.netatmo.event-subtype.state.option.SOUND_TEST_ERROR = Test d'alarme échoué
-channel-type.netatmo.event-subtype.state.option.DETECTOR_READY = Détecteur de fumée installé
-channel-type.netatmo.event-subtype.state.option.DETECTOR_TAMPERED = Détecteur de fumée altéré
+channel-type.netatmo.event-subtype.state.option.DETECTOR_READY = Détecteur installé
+channel-type.netatmo.event-subtype.state.option.DETECTOR_TAMPERED = Détecteur altéré
channel-type.netatmo.event-subtype.state.option.DETECTION_CHAMBER_CLEAN = Chambre de détection propre
channel-type.netatmo.event-subtype.state.option.DETECTION_CHAMBER_DIRTY = Chambre de détection poussiéreuse
channel-type.netatmo.event-subtype.state.option.BATTERY_LOW = Batterie faible
channel-type.netatmo.event-subtype.state.option.BATTERY_VERY_LOW = Batterie très faible
channel-type.netatmo.event-subtype.state.option.SMOKE_CLEARED = Fumée dispersée
channel-type.netatmo.event-subtype.state.option.SMOKE_DETECTED = Fumée détectée
+channel-type.netatmo.event-subtype.state.option.HUSH_ACTIVATED = Détection de fumée activée
+channel-type.netatmo.event-subtype.state.option.HUSH_DEACTIVATED = Détection de fumée désactivée
channel-type.netatmo.event-subtype.state.option.WIFI_STATUS_OK = Wi-Fi ok
channel-type.netatmo.event-subtype.state.option.WIFI_STATUS_ERROR = Wi-Fi en erreur
+channel-type.netatmo.event-subtype.state.option.CO_OK = Monoxyde de carbone OK
+channel-type.netatmo.event-subtype.state.option.CO_PRE_ALARM = Préalarme au monoxyde de carbone
+channel-type.netatmo.event-subtype.state.option.CO_ALARM = Alarme au monoxyde de carbone
channel-type.netatmo.event-type.label = Type Événement
channel-type.netatmo.event-type.description = Description de l'événement.
channel-type.netatmo.event-type.state.option.PERSON = Visage détecté
channel-type.netatmo.event-type.state.option.MISSED_CALL = Personne n'a répondu à l'appel
channel-type.netatmo.event-type.state.option.HUSH = Statut du détecteur de fumée
channel-type.netatmo.event-type.state.option.SMOKE = Détection de fumée
-channel-type.netatmo.event-type.state.option.TAMPERED = Détecteur de fumée altéré
+channel-type.netatmo.event-type.state.option.TAMPERED = Détecteur altéré
channel-type.netatmo.event-type.state.option.WIFI_STATUS = Statut du Wifi
channel-type.netatmo.event-type.state.option.BATTERY_STATUS = Niveau de la batterie
channel-type.netatmo.event-type.state.option.DETECTION_CHAMBER_STATUS = État de la chambre de détection
channel-type.netatmo.event-type.state.option.SOUND_TEST = Test audio
channel-type.netatmo.event-type.state.option.NEW_DEVICE = Un appareil a été ajouté
+channel-type.netatmo.event-type.state.option.CO_DETECTED = Détection de monoxyde de carbone
channel-type.netatmo.floodlight-mode.label = Projecteur
channel-type.netatmo.floodlight-mode.description = État du projecteur (allumé/éteint/auto)
channel-type.netatmo.floodlight-mode.state.option.ON = Allumé
channel-type.netatmo.setpoint.description = Température de consigne du thermostat.
channel-type.netatmo.siren-monitoring.label = Surveillance
channel-type.netatmo.siren-monitoring.description = Suivi de l'état de la sirène
-channel-type.netatmo.siren-status.label = État
+channel-type.netatmo.siren-status-rw.label = Sirène
+channel-type.netatmo.siren-status-rw.description = État de la sirène
+channel-type.netatmo.siren-status.label = Sirène
channel-type.netatmo.siren-status.description = État de la sirène
-channel-type.netatmo.siren-status.state.option.no_sound = Silencieuse
-channel-type.netatmo.siren-status.state.option.sound = Alarme
channel-type.netatmo.tag-status.label = État Porte
channel-type.netatmo.th-mode.label = Mode Thermostat
channel-type.netatmo.th-mode.description = Mode de thermostat choisi (maison, hors-gel, manuel, max).
thing-type.netatmo.account.label = Compte Netatmo
thing-type.netatmo.account.description = Ce pont représente un compte, passerelle vers l'API Netatmo.
+thing-type.netatmo.co-detector.label = Détecteur Monoxyde Carbone
+thing-type.netatmo.co-detector.description = Le détecteur de monoxyde de carbone intelligent Netatmo.
thing-type.netatmo.doorbell.label = Sonnette Vidéo Intelligente
thing-type.netatmo.doorbell.description = La sonnette vidéo intelligente Netatmo.
thing-type.netatmo.tag.label = Détecteur Ouverture Intelligent
config.clientId.description = ID client fourni pour l'application que vous avez créée sur http\://dev.netatmo.com/createapp
config.clientSecret.label = Secret client
config.clientSecret.description = Secret client fourni pour l'application que vous avez créée.
-config.refreshToken.label = Jeton de rafraîchissement
-config.refreshToken.description = Jeton de rafraichissement fourni par le processus d'authentification oAuth2.
+config.webHookPostfix.label = Postfix Webhook
+config.webHookPostfix.description = Chaîne ajoutée à l'adresse webhook générée (devrait commencer par `/`).
config.webHookUrl.label = Adresse Webhook
config.webHookUrl.description = Protocole, IP publique ou nom d'hôte et port pour accéder au serveur openHAB à partir d'Internet.
config.reconnectInterval.label = Intervalle de reconnexion
config.equipmentId.description = ID de l'appareil (adresse MAC).
config.thingId.label = ID
config.thingId.description = Identifiant unique défini par Netatmo.
+config.securityId.label = ID de sécurité
+config.securityId.description = Identifiant unique des périphériques de gestion de sécurité de la maison.
+config.energyId.label = ID d'énergie
+config.energyId.description = Identifiant unique des appareils de gestion d'énergie de la maison.
config.refreshInterval.label = Fréquence de rafraîchissement
config.refreshInterval.description = L'a fréquence d'interrogation de l'API Netatmo (en secondes).
thing-type.config.openwebnet.bus_dry_contact_ir.where.description = Contatti pulito per automazione (N\=1-201)\: esempio N\=60 --> where\=360. Contatti puliti e sensori infrarossi (Zone\=1-9, N\=1-9)\: esempio Zona\=4, N\=5 --> where\=345
thing-type.config.openwebnet.bus_energy_meter.where.label = Indirizzo OpenWebNet (where)
thing-type.config.openwebnet.bus_energy_meter.where.description = Esempio\: 5N con N\=[1-255]
+thing-type.config.openwebnet.bus_gateway.dateTimeSynch.label = Sincronizzazione Data Ora
+thing-type.config.openwebnet.bus_gateway.dateTimeSynch.description = Sincronizza la data e l'ora degli elementi slave sul BUS SCS utilizzando il timestamp openHAB (default\: false)
thing-type.config.openwebnet.bus_gateway.discoveryByActivation.label = Scoperta tramite Attivazione
thing-type.config.openwebnet.bus_gateway.discoveryByActivation.description = Rileva nuovi dispositivi BUS OpenWebNet quando vengono attivati (anche quando la scansione di nuovi dispositivi non è attiva) (predefinito\: false)
thing-type.config.openwebnet.bus_gateway.host.label = Host
thing-type.config.openwebnet.bus_scenario_control.where.label = Indirizzo OpenWebNet (dove)
thing-type.config.openwebnet.bus_scenario_control.where.description = Esempio\: indirizzo del modulo di controllo di scenario 53 --> dove\=53. Sul bus locale\: dove\=53\#4\#01
thing-type.config.openwebnet.bus_thermo_cu.where.label = Indirizzo OpenWebNet (where)
-thing-type.config.openwebnet.bus_thermo_cu.where.description = La Centrale Termoregolazione può avere solo l'indirizzo where\=0.
+thing-type.config.openwebnet.bus_thermo_cu.where.description = Per l'unità centrale termica, 99-zones --> dove\=\#0, per 4-zone --> dove\=\#0\#1
thing-type.config.openwebnet.bus_thermo_sensor.where.label = Indirizzo OpenWebNet (where)
thing-type.config.openwebnet.bus_thermo_sensor.where.description = Esempio\: sensore 3 della zona 2 --> where\=302. Sensore 5 della zona esterna 00 --> where\=500
thing-type.config.openwebnet.bus_thermo_zone.standAlone.label = Indipendente
--- /dev/null
+# add-on
+
+addon.plex.name = Extension Plex
+addon.plex.description = Surveille vos serveurs et lecteurs PLEX
+
+# thing types
+
+thing-type.plex.player.label = Lecteur PLEX
+thing-type.plex.player.description = Représente un lecteur PLEX
+thing-type.plex.server.label = Serveur PLEX
+thing-type.plex.server.description = Représente un serveur PLEX
+
+# thing types config
+
+thing-type.config.plex.player.playerID.label = ID du lecteur
+thing-type.config.plex.player.playerID.description = L'identifiant unique du lecteur
+thing-type.config.plex.server.group.auth-info.label = Informations d'authentification
+thing-type.config.plex.server.group.config-info.label = Configuration de la passerelle PLEX
+thing-type.config.plex.server.host.label = Serveur
+thing-type.config.plex.server.host.description = Nom d'hôte ou adresse IP
+thing-type.config.plex.server.password.label = Mot de passe
+thing-type.config.plex.server.password.description = Mot de passe
+thing-type.config.plex.server.portNumber.label = Numéro de port
+thing-type.config.plex.server.portNumber.description = Numéro de port (laisser vide si PLEX est installé sur le port par défaut)
+thing-type.config.plex.server.refreshRate.label = Intervalle d’actualisation
+thing-type.config.plex.server.refreshRate.description = Rythme en secondes auquel le statut du serveur PLEX est interrogé
+thing-type.config.plex.server.token.label = Jeton-X
+thing-type.config.plex.server.token.description = Jeton-X
+thing-type.config.plex.server.username.label = Nom d'utilisateur
+thing-type.config.plex.server.username.description = Si vous utilisez PLEX Home vous devez fournir ici le nom d'utilisateur et le mot de passe de votre compte PLEX. Si vous ne souhaitez pas saisir vos identifiants, vous pouvez aussi à la place définir directement votre jeton de compte ci-dessous.
+
+# channel types
+
+channel-type.plex.art.label = Jaquette Arrière
+channel-type.plex.art.description = L'URL de la jaquette arrière du média en cours de lecture
+channel-type.plex.currentPlayers.label = Lecteurs Actuels
+channel-type.plex.currentPlayers.description = Le nombre de lecteurs actuellement configurés à visionner sur PLEX
+channel-type.plex.currentPlayersActive.label = Lecteurs Actifs Actuels
+channel-type.plex.currentPlayersActive.description = Le nombre de lecteurs actuellement utilisés sur PLEX
+channel-type.plex.endtime.label = Heure fin
+channel-type.plex.endtime.description = Heure à laquelle le média en cours de lecture se terminera
+channel-type.plex.player.label = Contrôle Lecteur
+channel-type.plex.player.description = Le canal de contrôle du lecteur `PLAY/PAUSE/NEXT/PREVIOUS`
+channel-type.plex.power.label = État Alimentation Lecteur
+channel-type.plex.power.description = Le statut d'alimentation du lecteur
+channel-type.plex.progress.label = Avancement Lecture Média
+channel-type.plex.progress.description = L'avancement actuel de lecture du média
+channel-type.plex.state.label = État Lecteur
+channel-type.plex.state.description = L'état actuel du lecteur
+channel-type.plex.thumb.label = Jaquette
+channel-type.plex.thumb.description = L'URL de la jaquette du média en cours de lecture
+channel-type.plex.title.label = Titre
+channel-type.plex.title.description = Le titre du média en cours de lecture
+channel-type.plex.type.label = Type Média
+channel-type.plex.type.description = Le type actuel du média en lecture
+channel-type.plex.user.label = Utilisateur Lecteur
+channel-type.plex.user.description = Le titre de l'utilisateur qui contrôle le lecteur
# thing types config
+thing-type.config.renault.car.accountType.label = Type de compte
+thing-type.config.renault.car.accountType.option.MYDACIA = MyDacia
+thing-type.config.renault.car.accountType.option.MYRENAULT = MyRenault
thing-type.config.renault.car.kamereonApiKey.label = Clé API Kamereon
thing-type.config.renault.car.kamereonApiKey.description = Code d'accès pour les services MyRenault.
thing-type.config.renault.car.locale.label = Lieu de MyRenault
# channel types
channel-type.renault.batteryavailableenergy.label = Énergie Disponible Batterie
+channel-type.renault.batterystatusupdated.label = Mise à Jour État Batterie
+channel-type.renault.batterystatusupdated.description = Horodatage de la dernière mise à jour de l'état de la batterie
+channel-type.renault.batterystatusupdated.state.pattern = %1$tH\:%1$tM %1$td.%1$tm.%1$tY
channel-type.renault.chargingmode.label = Mode Charge
channel-type.renault.chargingmode.state.option.UNKNOWN = Inconnu
channel-type.renault.chargingmode.state.option.SCHEDULE_MODE = Mode planification
channel-type.renault.locationupdated.label = Mise à Jour Position
channel-type.renault.locationupdated.description = Horodatage de la dernière mise à jour de la position
channel-type.renault.locationupdated.state.pattern = %1$tH\:%1$tM %1$td.%1$tm.%1$tY
+channel-type.renault.locked.label = Verrouillé
+channel-type.renault.locked.description = État de verrouillage de la voiture
channel-type.renault.odometer.label = Compteur Kilométrique
channel-type.renault.odometer.description = Distance totale parcourue
+channel-type.renault.pause.label = Suspendre Charge
+channel-type.renault.pause.description = Suspendre ou reprendre la charge.
channel-type.renault.plugstatus.label = État Prise
channel-type.renault.plugstatus.description = État de la prise de rechargement.
channel-type.renault.plugstatus.state.option.UNPLUGGED = Débranchée