<config-description uri="channel-type:knx:dimmer">
<parameter name="switch" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to toggle the dimmer on or off</description>
+ <description>The group address (GA) to toggle the dimmer on or off. Additional listening (status) GAs can be added by
+ concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA,
+ separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on
+ startup.
+ </description>
</parameter>
<parameter name="position" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to set the absolute position of the dimmer</description>
+ <description>The group address to set the absolute brightness (see format description above).</description>
</parameter>
<parameter name="increaseDecrease" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to increase or decrease the dimmer</description>
+ <description>The group address to increase or decrease the dimmer (see format description above).</description>
</parameter>
</config-description>
<config-description uri="channel-type:knx:dimmer-control">
<parameter name="switch" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to toggle the dimmer on or off</description>
+ <description>The group address (GA) to toggle the dimmer on or off. Additional listening (status) GAs can be added by
+ concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA,
+ separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on
+ startup.
+ </description>
</parameter>
<parameter name="position" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to set the absolute position of the dimmer</description>
+ <description>The group address to set the brightness (see format description above).</description>
</parameter>
<parameter name="increaseDecrease" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to increase or decrease the dimmer</description>
+ <description>The group address to increase or decrease the dimmer (see format description above).</description>
</parameter>
<parameter name="frequency" type="integer">
<label>Frequency</label>
<description>Increase/decrease send frequency if dimming should be handled by the binding (in ms) - set to 0 if the
- KNX device sends them repeatedly itself</description>
+ KNX device sends them repeatedly itself.
+ </description>
<default>0</default>
</parameter>
</config-description>
<config-description uri="channel-type:knx:color">
<parameter name="hsb" type="text" required="false">
<label>Color Value</label>
- <description>The group address(es) in Group Address Notation for the color value</description>
+ <description>The group address (GA) to set the color value. Additional listening (status) GAs can be added by
+ concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA,
+ separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on
+ startup.
+ </description>
</parameter>
<parameter name="switch" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to toggle the color on or off</description>
+ <description>The group address to toggle the color on or off (see format description above).</description>
</parameter>
<parameter name="position" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to set the absolute position of the color</description>
+ <description>The group address to set the absolute brightness (see format description above).</description>
</parameter>
<parameter name="increaseDecrease" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to increase or decrease the color</description>
+ <description>The group address to increase or decrease the brightness (see format description above).</description>
</parameter>
</config-description>
<config-description uri="channel-type:knx:color-control">
<parameter name="hsb" type="text" required="false">
<label>Color Value</label>
- <description>The group address(es) in Group Address Notation for the color value</description>
+ <description>The group address (GA) to set the color value. Additional listening (status) GAs can be added by
+ concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA,
+ separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on
+ startup.
+ </description>
</parameter>
<parameter name="switch" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to toggle the color on or off</description>
+ <description>The group address to toggle the color on or off (see format description above).</description>
</parameter>
<parameter name="position" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to set the absolute position of the color</description>
+ <description>The group address to set the absolute brightness (see format description above).</description>
</parameter>
<parameter name="increaseDecrease" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to increase or decrease the color</description>
+ <description>The group address to increase or decrease the brightness (see format description above).</description>
</parameter>
<parameter name="frequency" type="integer">
<label>Frequency</label>
<description>Increase/decrease send frequency if color should be handled by the binding (in ms) - set to 0 if the KNX
- device sends them repeatedly itself</description>
+ device sends them repeatedly itself.
+ </description>
<default>0</default>
</parameter>
</config-description>
<config-description uri="channel-type:knx:rollershutter">
<parameter name="upDown" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to move the shutter in the DOWN or UP direction</description>
+ <description>The group address (GA) to set the moving direction (up/down). Additional listening (status) GAs can be
+ added by concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first
+ GA, separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus
+ on startup.
+ </description>
</parameter>
<parameter name="stopMove" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to start (MOVE) or STOP shutter movement</description>
+ <description>The group address to start (MOVE) or STOP shutter movement (see format description above).</description>
</parameter>
<parameter name="position" type="text" required="false">
<label>Address</label>
- <description>The group address(es) in Group Address Notation to set the absolute position of the shutter, in %</description>
+ <description>The group address to set the absolute position of the shutter, in % (see format description above).</description>
</parameter>
</config-description>
<config-description uri="channel-type:knx:single">
<parameter name="ga" type="text" required="true">
<label>Address</label>
- <description>The group address(es) in Group Address Notation</description>
+ <description>The group address (GA) for this channel. Additional listening (status) GAs can be added by concatenating
+ GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA, separated by ":"
+ (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on startup.
+ </description>
</parameter>
</config-description>
addon.knx.name = KNX Binding
addon.knx.description = This binding supports connecting to a KNX bus
+# add-on config
+
+addon.config.knx.disableUoM.label = Disable UoM
+addon.config.knx.disableUoM.description = This disables Units of Measurement support for incoming values.
+
# thing types
thing-type.knx.device.label = KNX Device
# channel types config
channel-type.config.knx.color-control.frequency.label = Frequency
-channel-type.config.knx.color-control.frequency.description = Increase/decrease send frequency if color should be handled by the binding (in ms) - set to 0 if the KNX device sends them repeatedly itself
+channel-type.config.knx.color-control.frequency.description = Increase/decrease send frequency if color should be handled by the binding (in ms) - set to 0 if the KNX device sends them repeatedly itself.
channel-type.config.knx.color-control.hsb.label = Color Value
-channel-type.config.knx.color-control.hsb.description = The group address(es) in Group Address Notation for the color value
+channel-type.config.knx.color-control.hsb.description = The group address (GA) to set the color value. Additional listening (status) GAs can be added by concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA, separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on startup.
channel-type.config.knx.color-control.increaseDecrease.label = Address
-channel-type.config.knx.color-control.increaseDecrease.description = The group address(es) in Group Address Notation to increase or decrease the color
+channel-type.config.knx.color-control.increaseDecrease.description = The group address to increase or decrease the brightness (see format description above).
channel-type.config.knx.color-control.position.label = Address
-channel-type.config.knx.color-control.position.description = The group address(es) in Group Address Notation to set the absolute position of the color
+channel-type.config.knx.color-control.position.description = The group address to set the absolute brightness (see format description above).
channel-type.config.knx.color-control.switch.label = Address
-channel-type.config.knx.color-control.switch.description = The group address(es) in Group Address Notation to toggle the color on or off
+channel-type.config.knx.color-control.switch.description = The group address to toggle the color on or off (see format description above).
channel-type.config.knx.color.hsb.label = Color Value
-channel-type.config.knx.color.hsb.description = The group address(es) in Group Address Notation for the color value
+channel-type.config.knx.color.hsb.description = The group address (GA) to set the color value. Additional listening (status) GAs can be added by concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA, separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on startup.
channel-type.config.knx.color.increaseDecrease.label = Address
-channel-type.config.knx.color.increaseDecrease.description = The group address(es) in Group Address Notation to increase or decrease the color
+channel-type.config.knx.color.increaseDecrease.description = The group address to increase or decrease the brightness (see format description above).
channel-type.config.knx.color.position.label = Address
-channel-type.config.knx.color.position.description = The group address(es) in Group Address Notation to set the absolute position of the color
+channel-type.config.knx.color.position.description = The group address to set the absolute brightness (see format description above).
channel-type.config.knx.color.switch.label = Address
-channel-type.config.knx.color.switch.description = The group address(es) in Group Address Notation to toggle the color on or off
+channel-type.config.knx.color.switch.description = The group address to toggle the color on or off (see format description above).
channel-type.config.knx.dimmer-control.frequency.label = Frequency
-channel-type.config.knx.dimmer-control.frequency.description = Increase/decrease send frequency if dimming should be handled by the binding (in ms) - set to 0 if the KNX device sends them repeatedly itself
+channel-type.config.knx.dimmer-control.frequency.description = Increase/decrease send frequency if dimming should be handled by the binding (in ms) - set to 0 if the KNX device sends them repeatedly itself.
channel-type.config.knx.dimmer-control.increaseDecrease.label = Address
-channel-type.config.knx.dimmer-control.increaseDecrease.description = The group address(es) in Group Address Notation to increase or decrease the dimmer
+channel-type.config.knx.dimmer-control.increaseDecrease.description = The group address to increase or decrease the dimmer (see format description above).
channel-type.config.knx.dimmer-control.position.label = Address
-channel-type.config.knx.dimmer-control.position.description = The group address(es) in Group Address Notation to set the absolute position of the dimmer
+channel-type.config.knx.dimmer-control.position.description = The group address to set the brightness (see format description above).
channel-type.config.knx.dimmer-control.switch.label = Address
-channel-type.config.knx.dimmer-control.switch.description = The group address(es) in Group Address Notation to toggle the dimmer on or off
+channel-type.config.knx.dimmer-control.switch.description = The group address (GA) to toggle the dimmer on or off. Additional listening (status) GAs can be added by concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA, separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on startup.
channel-type.config.knx.dimmer.increaseDecrease.label = Address
-channel-type.config.knx.dimmer.increaseDecrease.description = The group address(es) in Group Address Notation to increase or decrease the dimmer
+channel-type.config.knx.dimmer.increaseDecrease.description = The group address to increase or decrease the dimmer (see format description above).
channel-type.config.knx.dimmer.position.label = Address
-channel-type.config.knx.dimmer.position.description = The group address(es) in Group Address Notation to set the absolute position of the dimmer
+channel-type.config.knx.dimmer.position.description = The group address to set the absolute brightness (see format description above).
channel-type.config.knx.dimmer.switch.label = Address
-channel-type.config.knx.dimmer.switch.description = The group address(es) in Group Address Notation to toggle the dimmer on or off
+channel-type.config.knx.dimmer.switch.description = The group address (GA) to toggle the dimmer on or off. Additional listening (status) GAs can be added by concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA, separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on startup.
channel-type.config.knx.rollershutter.position.label = Address
-channel-type.config.knx.rollershutter.position.description = The group address(es) in Group Address Notation to set the absolute position of the shutter, in %
+channel-type.config.knx.rollershutter.position.description = The group address to set the absolute position of the shutter, in % (see format description above).
channel-type.config.knx.rollershutter.stopMove.label = Address
-channel-type.config.knx.rollershutter.stopMove.description = The group address(es) in Group Address Notation to start (MOVE) or STOP shutter movement
+channel-type.config.knx.rollershutter.stopMove.description = The group address to start (MOVE) or STOP shutter movement (see format description above).
channel-type.config.knx.rollershutter.upDown.label = Address
-channel-type.config.knx.rollershutter.upDown.description = The group address(es) in Group Address Notation to move the shutter in the DOWN or UP direction
+channel-type.config.knx.rollershutter.upDown.description = The group address (GA) to set the moving direction (up/down). Additional listening (status) GAs can be added by concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA, separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on startup.
channel-type.config.knx.single.ga.label = Address
-channel-type.config.knx.single.ga.description = The group address(es) in Group Address Notation
+channel-type.config.knx.single.ga.description = The group address (GA) for this channel. Additional listening (status) GAs can be added by concatenating GAs with a "+" (e.g. "1/7/18+2/9/15"). The DPT can be defined by prepending it to the first GA, separated by ":" (e.g. "2.001:1/4/17"). GAs prepended with a "<" (e.g. "<5/1/125") are read from the bus on startup.
# thing types config
projects / openhab-addons.git / commitdiff