| Channel | Channel Group | Description | Item Type | RW |
| -------------------------------- | --------------- | -------------------------------------------------------------------------------------------------------------------------------- | ------------------------ | -- |
| sysdate | general | The KWL's system date and time | DateTime | RW |
-| summerWinter | general | Indicates if summertime or wintertime is active (OFF = wintertime, ON = summertime) | Switch | RW |
+| summerWinter | general | Indicates if summertime or wintertime is active (0 = wintertime, 1 = summertime) | Number | RW |
| autoSwUpdate | general | Indicates if automatic software updates are enable | Switch | RW |
| accessHeliosPortal | general | Indicates if access to Helios portal is enabled | Switch | RW |
| minFanStage | unitConfig | Minimum fan stage (0 or 1) (0, 1) | Number | RW |
| humidityStopTime | humidityControl | Humidity stop time in hours (0-24) (0 - 24 h) | Number:Time | RW |
| co2ControlSetValue | co2Control | CO2 control set value (in ppm) (300 - 2000 ppm) | Number:Dimensionless | RW |
| co2ControlSteps | co2Control | CO2 control steps (in ppm) (50 - 400 ppm) | Number:Dimensionless | RW |
-| vocControlStatus | vocControl | VOC control status (0 = off, 1 = stepped, 2 = stepless) | Number | RW |
| vocControlSetValue | vocControl | VOC control set value (in ppm) (300 - 2000 ppm) | Number:Dimensionless | RW |
| vocControlSteps | vocControl | VOC control steps (in ppm) (50 - 400 ppm) | Number:Dimensionless | RW |
| comfortTemp | unitConfig | Comfort Temperature (10.0 - 25.0 °C) | Number:Temperature | RW |
| standbyModeFanStage | operation | Standby mode fan stage (0 - 4) | Number | RW |
| standbyModeRemainingTime | operation | Standby mode remaining time (0 - 180 min) | Number:Time | R |
| standbyModeStatus | operation | Standby mode status | Switch | RW |
-| operatingMode | operation | Operating mode (automatic/manual) (OFF = automatic, ON = manual) | Switch | RW |
+| operatingMode | operation | Operating mode (automatic/manual) (0 = automatic, 1 = manual) | Number | RW |
| fanStage | operation | Fan stage (0 - 4) | Number | RW |
| percentageFanStage | operation | Fan stage in percent (0 - 100 %) | Number:Dimensionless | R |
| temperatureOutsideAir | general | Ouside air temperature in °C (-27.0 - 9998.9 °C) | Number:Temperature | R |
| holidayProgrammeActivationTime | operation | Holiday programme activation time in minutes (5 - 300 min) | Number:Time | RW |
| runOnTimeVhzNhz | unitConfig | Stopping time preheater/afterheater in seconds (60 - 120 s) | Number:Time | RW |
| errorOutputFunction | unitConfig | Error output function (collective error or just error) (1 = collective error, 2 = only error) | Number | RW |
-| filterChange | unitConfig | Filter change | Switch | RW |
+| filterChange | unitConfig | Filter change (0 = No, 1 = Yes) | Number | RW |
| filterChangeInterval | unitConfig | Filter change interval in months (1 - 12) | Number | RW |
| filterChangeRemainingTime | general | Filter change remaining time in minutes (1 - 55000 min) | Number:Time | R |
| bypassRoomTemperature | unitConfig | Bypass room temperature in °C (10 - 40 °C) | Number:Temperature | RW |
| bypassFrom | unitConfig | Bypass active from | DateTime | RW |
| bypassTo | unitConfig | Bypass active to | DateTime | RW |
+
## Thing Actions
### Reset Filter Change Timer
| kwlFtfConfig7 | Humidity/temperature sensor configuration 7 (1 = only humidity, 2 = only temperature, 3 = combined) |
| humidityControlStatus | Humidity control status (0 = off, 1 = stepped, 2 = stepless) |
| co2ControlStatus | CO2 control status (0 = off, 1 = stepped, 2 = stepless) |
+| vocControlStatus | VOC control status (0 = off, 1 = stepped, 2 = stepless) |
| dateFormat | Date format (0 = dd.mm.yyyy, 1 = mm.dd.yyyy, 2 = yyyy.mm.dd) |
| heatExchangerType | Heat exchanger type (0 = plastic, 1 = aluminium, 2 = enthalpy) |
| serNo | Serial number |
| sensorConfigKwlFtf8 | Sensor configuration (installed or not) KWL-FTF 8 (OFF = no sensor, ON = sensor installed) |
-
## Full Example
### Thing Configuration
// before reading from device
private class BypassDate {
+ private final int[] MONTH_MAX_DAYS = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
// initialization to avoid issues when updating before all variables were read
private int month = 1;
private int day = 1;
+ public BypassDate() {
+ }
+
+ public BypassDate(int day, int month) {
+ this.setDay(day);
+ this.setMonth(month);
+ }
+
public void setMonth(int month) {
- this.month = month;
+ if (month < 1) {
+ this.month = 1;
+ } else if (month > 12) {
+ this.month = 12;
+ } else {
+ this.month = month;
+ }
+ }
+
+ public int getMonth() {
+ return this.month;
}
public void setDay(int day) {
- this.day = day;
+ if (day < 1) {
+ this.day = 1;
+ } else {
+ this.day = Math.min(day, MONTH_MAX_DAYS[month - 1]);
+ }
+ }
+
+ public int getDay() {
+ return this.day;
}
public DateTimeType toDateTimeType() {
}
protected void setBypass(boolean from, int day, int month) {
+ BypassDate bypassDate = new BypassDate(day, month);
try {
this.writeValue(from ? HeliosEasyControlsBindingConstants.BYPASS_FROM_DAY
- : HeliosEasyControlsBindingConstants.BYPASS_TO_DAY, Integer.toString(day));
- this.writeValue(from ? HeliosEasyControlsBindingConstants.BYPASS_FROM_MONTH
- : HeliosEasyControlsBindingConstants.BYPASS_TO_MONTH, Integer.toString(month));
+ : HeliosEasyControlsBindingConstants.BYPASS_TO_DAY, Integer.toString(bypassDate.getDay()));
+ this.writeValue(
+ from ? HeliosEasyControlsBindingConstants.BYPASS_FROM_MONTH
+ : HeliosEasyControlsBindingConstants.BYPASS_TO_MONTH,
+ Integer.toString(bypassDate.getMonth()));
} catch (HeliosException e) {
logger.warn("{} encountered Exception when trying to set bypass period: {}",
HeliosEasyControlsHandler.class.getSimpleName(), e.getMessage());
projects / openhab-addons.git / commitdiff