# binding
+
binding.hue.name = Hue Binding
binding.hue.description = The Hue Binding integrates the Philips Hue system. It allows to control Hue bulbs.
-# binding configuration
+# binding config
+
binding.config.hue.removalGracePeriod.label = Removal Grace Period
binding.config.hue.removalGracePeriod.description = Extra grace period (seconds) that UPnP discovery shall wait before removing a lost Bridge from the Inbox. Default is 50 seconds.
# thing types
-thing-type.hue.bridge.label = Hue Bridge
-thing-type.hue.bridge.description = The Hue bridge represents the Philips Hue bridge.
+
thing-type.hue.0000.label = On/Off Light
thing-type.hue.0000.description = A light that could be switched on and off.
thing-type.hue.0010.label = On/Off Plug-in Unit
thing-type.hue.0840.description = A generic sensor object for IP sensor use.
thing-type.hue.0850.label = CLIP Generic Flag Sensor
thing-type.hue.0850.description = A generic sensor object for IP sensor use.
+thing-type.hue.bridge.label = Hue Bridge
+thing-type.hue.bridge.description = The Hue bridge represents the Philips Hue bridge.
thing-type.hue.geofencesensor.label = Geofence Sensor
thing-type.hue.geofencesensor.description = A sensor providing geofence based presence detection.
+thing-type.hue.group.label = Hue Group
+thing-type.hue.group.description = A group of lights or a room that could be switched on and off.
+
+# thing types config
-# thing type configuration
-thing-type.config.hue.bridge.ipAddress.label = Network Address
-thing-type.config.hue.bridge.ipAddress.description = Network address of the Hue bridge.
-thing-type.config.hue.bridge.port.label = Port
-thing-type.config.hue.bridge.port.description = Port of the Hue bridge.
-thing-type.config.hue.bridge.userName.label = Username
-thing-type.config.hue.bridge.userName.description = Name of a registered Hue bridge user, that allows to access the API.
-thing-type.config.hue.bridge.pollingInterval.label = Polling Interval
-thing-type.config.hue.bridge.pollingInterval.description = Seconds between fetching values from the Hue bridge. Default is 10.
-thing-type.config.hue.bridge.sensorPollingInterval.label = Sensor Polling Interval
-thing-type.config.hue.bridge.sensorPollingInterval.description = Milliseconds between fetching sensor-values from the Hue bridge. A higher value means more delay for the sensor values, but a too low value can cause congestion on the Hue bridge. Use 0 to disable the polling for sensors. Default is 500.
thing-type.config.hue.0000.lightId.label = Light ID
thing-type.config.hue.0000.lightId.description = The light identifier identifies one certain hue light.
thing-type.config.hue.0010.lightId.label = Light ID
thing-type.config.hue.0010.lightId.description = The identifier that is used within the hue bridge.
-thing-type.config.hue.0100.lightId.label = Light ID
-thing-type.config.hue.0100.lightId.description = The light identifier identifies one certain hue light.
thing-type.config.hue.0100.fadetime.label = Fade Time
thing-type.config.hue.0100.fadetime.description = Fade time in milliseconds for changing values
-thing-type.config.hue.0106.sensorId.label = Sensor ID
-thing-type.config.hue.0106.sensorId.description = The identifier that is used within the hue bridge.
-thing-type.config.hue.0106.on.label = Sensor Status
-thing-type.config.hue.0106.on.description = Enables or disables the sensor.
+thing-type.config.hue.0100.lightId.label = Light ID
+thing-type.config.hue.0100.lightId.description = The light identifier identifies one certain hue light.
thing-type.config.hue.0106.ledindication.label = LED Indication
thing-type.config.hue.0106.ledindication.description = Turns device LED during normal operation on or off. Devices might still indicate exceptional operation (Reset, SW Update, Battery Low).
+thing-type.config.hue.0106.on.label = Sensor Status
+thing-type.config.hue.0106.on.description = Enables or disables the sensor.
+thing-type.config.hue.0106.sensorId.label = Sensor ID
+thing-type.config.hue.0106.sensorId.description = The identifier that is used within the hue bridge.
thing-type.config.hue.0106.tholddark.label = Threshold Dark
thing-type.config.hue.0106.tholddark.description = Threshold the user configured to be used in rules to determine insufficient light level (ie below threshold). Default value 16000.
thing-type.config.hue.0106.tholdoffset.label = Threshold Offset
-thing-type.config.hue.0106.tholdoffset.description = Threshold the user configured to be used in rules to determine sufficient light level (ie above threshold). Specified as relative offset to the "dark" threshold. Shall be >=1. Default value 7000.
-thing-type.config.hue.0110.lightId.label = Light ID
-thing-type.config.hue.0110.lightId.description = The identifier that is used within the hue bridge.
+thing-type.config.hue.0106.tholdoffset.description = Threshold the user configured to be used in rules to determine sufficient light level (ie above threshold). Specified as relative offset to the “dark” threshold. Shall be >=1. Default value 7000.
thing-type.config.hue.0110.fadetime.label = Fade Time
thing-type.config.hue.0110.fadetime.description = Fade time in milliseconds for changing values
-thing-type.config.hue.0200.lightId.label = Light ID
-thing-type.config.hue.0200.lightId.description = The light identifier identifies one certain hue light.
+thing-type.config.hue.0110.lightId.label = Light ID
+thing-type.config.hue.0110.lightId.description = The identifier that is used within the hue bridge.
thing-type.config.hue.0200.fadetime.label = Fade Time
thing-type.config.hue.0200.fadetime.description = Fade time in milliseconds for changing values
-thing-type.config.hue.0210.lightId.label = Light ID
-thing-type.config.hue.0210.lightId.description = The light identifier identifies one certain hue light.
+thing-type.config.hue.0200.lightId.label = Light ID
+thing-type.config.hue.0200.lightId.description = The light identifier identifies one certain hue light.
thing-type.config.hue.0210.fadetime.label = Fade Time
thing-type.config.hue.0210.fadetime.description = Fade time in milliseconds for changing values
-thing-type.config.hue.0220.lightId.label = Light ID
-thing-type.config.hue.0220.lightId.description = The light identifier identifies one certain hue light.
+thing-type.config.hue.0210.lightId.label = Light ID
+thing-type.config.hue.0210.lightId.description = The light identifier identifies one certain hue light.
thing-type.config.hue.0220.fadetime.label = Fade Time
thing-type.config.hue.0220.fadetime.description = Fade time in milliseconds for changing values
-thing-type.config.hue.0302.sensorId.label = Sensor ID
-thing-type.config.hue.0302.sensorId.description = The identifier that is used within the hue bridge.
-thing-type.config.hue.0302.on.label = Sensor Status
-thing-type.config.hue.0302.on.description = Enables or disables the sensor.
+thing-type.config.hue.0220.lightId.label = Light ID
+thing-type.config.hue.0220.lightId.description = The light identifier identifies one certain hue light.
thing-type.config.hue.0302.ledindication.label = LED Indication
thing-type.config.hue.0302.ledindication.description = Turns device LED during normal operation on or off. Devices might still indicate exceptional operation (Reset, SW Update, Battery Low).
-thing-type.config.hue.0820.sensorId.label = Sensor ID
-thing-type.config.hue.0820.sensorId.description = The identifier that is used within the hue bridge.
+thing-type.config.hue.0302.on.label = Sensor Status
+thing-type.config.hue.0302.on.description = Enables or disables the sensor.
+thing-type.config.hue.0302.sensorId.label = Sensor ID
+thing-type.config.hue.0302.sensorId.description = The identifier that is used within the hue bridge.
thing-type.config.hue.0820.on.label = Sensor Status
thing-type.config.hue.0820.on.description = Enables or disables the sensor.
-thing-type.config.hue.0830.sensorId.label = Sensor ID
-thing-type.config.hue.0830.sensorId.description = The identifier that is used within the hue bridge.
+thing-type.config.hue.0820.sensorId.label = Sensor ID
+thing-type.config.hue.0820.sensorId.description = The identifier that is used within the hue bridge.
thing-type.config.hue.0830.on.label = Sensor Status
thing-type.config.hue.0830.on.description = Enables or disables the sensor.
-thing-type.config.hue.0840.sensorId.label = Sensor ID
-thing-type.config.hue.0840.sensorId.description = The identifier that is used within the hue bridge.
+thing-type.config.hue.0830.sensorId.label = Sensor ID
+thing-type.config.hue.0830.sensorId.description = The identifier that is used within the hue bridge.
thing-type.config.hue.0840.on.label = Sensor Status
thing-type.config.hue.0840.on.description = Enables or disables the sensor.
-thing-type.config.hue.0850.sensorId.label = Sensor ID
-thing-type.config.hue.0850.sensorId.description = The identifier that is used within the hue bridge.
+thing-type.config.hue.0840.sensorId.label = Sensor ID
+thing-type.config.hue.0840.sensorId.description = The identifier that is used within the hue bridge.
thing-type.config.hue.0850.on.label = Sensor Status
thing-type.config.hue.0850.on.description = Enables or disables the sensor.
-thing-type.config.hue.geofencesensor.sensorId.label = Sensor ID
-thing-type.config.hue.geofencesensor.sensorId.description = The identifier that is used within the hue bridge.
+thing-type.config.hue.0850.sensorId.label = Sensor ID
+thing-type.config.hue.0850.sensorId.description = The identifier that is used within the hue bridge.
+thing-type.config.hue.bridge.ipAddress.label = Network Address
+thing-type.config.hue.bridge.ipAddress.description = Network address of the Hue bridge.
+thing-type.config.hue.bridge.pollingInterval.label = Polling Interval
+thing-type.config.hue.bridge.pollingInterval.description = Seconds between fetching values from the Hue bridge. Default is 10.
+thing-type.config.hue.bridge.port.label = Port
+thing-type.config.hue.bridge.port.description = Port of the Hue bridge.
+thing-type.config.hue.bridge.sensorPollingInterval.label = Sensor Polling Interval
+thing-type.config.hue.bridge.sensorPollingInterval.description = Milliseconds between fetching sensor-values from the Hue bridge. A higher value means more delay for the sensor values, but a too low value can cause congestion on the Hue bridge. Use 0 to disable the polling for sensors. Default is 500.
+thing-type.config.hue.bridge.userName.label = Username
+thing-type.config.hue.bridge.userName.description = Name of a registered Hue bridge user, that allows to access the API.
thing-type.config.hue.geofencesensor.on.label = Sensor Status
thing-type.config.hue.geofencesensor.on.description = Enables or disables the sensor.
-thing-type.config.hue.presencesensor.sensorId.label = Sensor ID
-thing-type.config.hue.presencesensor.sensorId.description = The identifier that is used within the hue bridge.
+thing-type.config.hue.geofencesensor.sensorId.label = Sensor ID
+thing-type.config.hue.geofencesensor.sensorId.description = The identifier that is used within the hue bridge.
+thing-type.config.hue.group.fadetime.label = Fade Time
+thing-type.config.hue.group.fadetime.description = Fade time in milliseconds for changing values
+thing-type.config.hue.group.groupId.label = Group ID
+thing-type.config.hue.group.groupId.description = The group identifier identifies one certain hue group or room.
thing-type.config.hue.presencesensor.ledindication.label = LED Indication
thing-type.config.hue.presencesensor.ledindication.description = Turns device LED during normal operation on or off. Devices might still indicate exceptional operation (Reset, SW Update, Battery Low).
thing-type.config.hue.presencesensor.sensitivity.label = Sensitivity
thing-type.config.hue.presencesensor.sensitivity.description = The current sensitivity of the presence sensor. Cannot exceed maximum sensitivity.
thing-type.config.hue.presencesensor.sensitivitymax.label = Maximum Sensitivity
thing-type.config.hue.presencesensor.sensitivitymax.description = The maximum sensitivity of the presence sensor.
+thing-type.config.hue.presencesensor.sensorId.label = Sensor ID
+thing-type.config.hue.presencesensor.sensorId.description = The identifier that is used within the hue bridge.
# channel types
-channel-type.hue.alert.label = Alarm
+
+channel-type.hue.alert.label = Alert
channel-type.hue.alert.description = The alert channel allows a temporary change to the bulb’s state.
channel-type.hue.alert.state.option.NONE = None
channel-type.hue.alert.state.option.SELECT = Alert
channel-type.hue.alert.state.option.LSELECT = Long Alert
-channel-type.hue.effect.label = Color Loop
-channel-type.hue.effect.description = The effect channel allows putting the bulb in a color looping mode.
-channel-type.hue.scene.label = Scene
-channel-type.hue.scene.description = The scene channel allows recalling a scene to all lights that belong to the scene.
-
-channel-type.hue.last_updated.label = Last Updated
-channel-type.hue.last_updated.description = The date and time when the sensor was last updated.
-channel-type.hue.last_updated.options.pattern = %1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS
-channel-type.hue.illuminance.label = Illuminance
-channel-type.hue.illuminance.description = Current illuminance.
-channel-type.hue.light_level.label = Light Level
-channel-type.hue.light_level.description = Current light level.
channel-type.hue.dark.label = Dark
channel-type.hue.dark.description = Light level is below the darkness threshold.
channel-type.hue.daylight.label = Daylight
channel-type.hue.daylight.description = Light level is above the daylight threshold.
channel-type.hue.dimmer_switch.label = Dimmer Switch State
channel-type.hue.dimmer_switch.description = The Button that was last pressed on the dimmer switch.
-channel-type.hue.tap_switch.label = Tap Switch State
-channel-type.hue.tap_switch.description = The Button that was last pressed on the tap switch.
-channel-type.hue.tap_switch.state.option.34 = Button 1
-channel-type.hue.tap_switch.state.option.16 = Button 2
-channel-type.hue.tap_switch.state.option.17 = Button 3
-channel-type.hue.tap_switch.state.option.18 = Button 4
-channel-type.hue.temperature.label = Temperature
-channel-type.hue.temperature.description = Current temperature.
-channel-type.hue.dimmer_switch_event.label = Dimmer Switch Event
-channel-type.hue.dimmer_switch_event.description = Triggers when a button is pressed on the dimmer switch.
channel-type.hue.dimmer_switch.state.option.1000 = On (Initial Press)
channel-type.hue.dimmer_switch.state.option.1001 = On (Hold)
channel-type.hue.dimmer_switch.state.option.1002 = On (Short Released)
channel-type.hue.dimmer_switch.state.option.4001 = Off (Hold)
channel-type.hue.dimmer_switch.state.option.4002 = Off (Short Released)
channel-type.hue.dimmer_switch.state.option.4003 = Off (Long Released)
-channel-type.hue.status.label = Status
-channel-type.hue.status.description = Status of CLIP sensor.
+channel-type.hue.dimmer_switch_event.label = Dimmer Switch Event
+channel-type.hue.dimmer_switch_event.description = Triggers when a button is pressed on the dimmer switch.
+channel-type.hue.effect.label = Color Loop
+channel-type.hue.effect.description = The effect channel allows putting the bulb in a color looping mode.
channel-type.hue.flag.label = Flag
channel-type.hue.flag.description = Flag of CLIP sensor.
+channel-type.hue.illuminance.label = Illuminance
+channel-type.hue.illuminance.description = Current illuminance.
+channel-type.hue.last_updated.label = Last Updated
+channel-type.hue.last_updated.description = The date and time when the sensor was last updated.
+channel-type.hue.last_updated.state.pattern = %1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS
+channel-type.hue.light_level.label = Light Level
+channel-type.hue.light_level.description = Current light level.
+channel-type.hue.scene.label = Scene
+channel-type.hue.scene.description = The scene channel allows recalling a scene to all lights that belong to the scene.
+channel-type.hue.status.label = Status
+channel-type.hue.status.description = Status of CLIP sensor.
+channel-type.hue.tap_switch.label = Tap Switch State
+channel-type.hue.tap_switch.description = The Button that was last pressed on the tap switch.
+channel-type.hue.tap_switch.state.option.34 = Button 1
+channel-type.hue.tap_switch.state.option.16 = Button 2
+channel-type.hue.tap_switch.state.option.17 = Button 3
+channel-type.hue.tap_switch.state.option.18 = Button 4
channel-type.hue.tap_switch_event.label = Tap Switch Event
channel-type.hue.tap_switch_event.description = Triggers when a button is pressed on the tap switch.
+channel-type.hue.temperature.label = Temperature
+channel-type.hue.temperature.description = Current temperature.
+
+# channel types
+
+channel-type.hue.last_updated.options.pattern = %1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS
+
+# config status messages
-# Config status messages
config-status.error.missing-ip-address-configuration = No IP address for the Hue bridge has been provided.
-# Thing status descriptions
+# thing status descriptions
+
offline.conf-error-no-ip-address = Cannot connect to Hue bridge. IP address not available in configuration.
offline.conf-error-no-username = Cannot connect to Hue bridge. User name for authentication not available in configuration.
offline.conf-error-invalid-username = Authentication failed. Remove user name from configuration to generate a new one.
offline.sensor-removed = Hue bridge reports sensor as removed.
offline.group-removed = Hue bridge reports group as removed.
-#LightActions
-actionLabel = send a light command with a custom fade time
-actionDesc = Send a light command with a custom fade time.
+# lightactions
actionInputChannelLabel = Channel
actionInputChannelDesc = The channel to send the command to.
actionInputCommandDesc = The Command for the light.
actionInputFadeTimeLabel = FadeTime
actionInputFadeTimeDesc = The fade time to use for the light command in ms.
+actionLabel = send a light command with a custom fade time
+actionDesc = Send a light command with a custom fade time.
projects / openhab-addons.git / commitdiff