The ID is the MAC address of the bridge in hexadecimal digits.
Bridge milight:bridgeV3:mybridge [ host="192.168.0.70", bridgeid="ACCF23A6C0B4", passwordByte1=0, passwordByte2=0, repeat=2, delayTime=75 ] {
- Thing whiteLed myWhite [ zone="0" ]
- Thing rgbwwLed myRGB [ zone="4" ]
- Thing rgbLed myOldRGB [ zone="1" ]
+ Thing whiteLed myWhite [ zone="0" ]
+ Thing rgbwwLed myRGB [ zone="4" ]
+ Thing rgbLed myOldRGB [ zone="1" ]
}
The Thing configuration for the bridge uses the following syntax
-* Bridge milight:bridgeV3:<any name> &lsqb host="<IP-Address of bridge>", bridgeid="<mac>" &rsqb
-* Bridge milight:bridgeV6:<any name> &lsqb host="<IP-Address of bridge>", bridgeid="<mac>", passwordByte1="<0-255>", passwordByte2="<0-255>" &rsqb
+* Bridge milight:bridgeV3:<any name> host="<IP-Address of bridge>", bridgeid="<mac>"
+* Bridge milight:bridgeV6:<any name> host="<IP-Address of bridge>", bridgeid="<mac>", passwordByte1="<0-255>", passwordByte2="<0-255>"
Optionally, the following parameters can be added
The Thing configuration for the bulbs uses the following syntax:
-&lsqbThing&rsqb <type of bulb> <any name> &lsqb zone="<0-4>" &rsqb
+Thing <type of bulb> <any name> zone="<0-4>"
The following bulb types are valid for configuration:
-* rgbv2Led: The very first available bulb. Not very common anymore.
-* whiteLed: The dual white bulbs (with cold/warm white) used with v3-v5 bridges.
-* rgbLed: The rgb+white bulbs (with cold/warm white) used with v3-v5 bridges. About 4080 colors (255 colors * 16 brightness steps).
+* rgbv2Led: The very first available bulb. Not very common anymore.
+* whiteLed: The dual white bulbs (with cold/warm white) used with v3-v5 bridges.
+* rgbLed: The rgb+white bulbs (with cold/warm white) used with v3-v5 bridges. About 4080 colors (255 colors x 16 brightness steps).
* rgbiboxLed: The iBox bridge integrated color bulb without a dedicated white channel.
-* rgbwLed: The 2016/2017 color bulb without saturation support. About 6630 (255*26) colors.
-* rgbwwLed: The 2016/2017 color bulb with saturation support. About 1.044.480 (255*64*64) different color shades. Use this also for the newer generation of the dual white bulbs.
+* rgbwLed: The 2016/2017 color bulb without saturation support. About 6630 (255x26) colors.
+* rgbwwLed: The 2016/2017 color bulb with saturation support. About 1.044.480 (255x64x64) different color shades. Use this also for the newer generation of the dual white bulbs.
The zone number is either 0 for meaning all bulbs of the same type or a valid zone number (1-4).
Future bridges may support more zones.
For dual white bulbs these channels are supported:
- ledbrightness Controls the brightness of your bulbs
- ledtemperature Changes from cold white to warm white and vice versa
- lednightmode Dims your bulbs to a very low level to use them as a night light
- animation_mode_relative Changes the animation mode. Use an IncreaseDecrease type of widget.
+ ledbrightness Controls the brightness of your bulbs
+ ledtemperature Changes from cold white to warm white and vice versa
+ lednightmode Dims your bulbs to a very low level to use them as a night light
+ animation_mode_relative Changes the animation mode. Use an IncreaseDecrease type of widget
For rgbv2Led bulbs these channels are supported:
- ledbrightness Controls the brightness of your bulbs
- ledcolor Changes the color and brightness of your rgb bulbs when bound to a colorpicker
- or just the brightness if bound to a Dimmer or controls On/Off if bound to a switch.
- animation_mode_relative Changes the animation mode. Use an IncreaseDecrease type of widget.
+ ledbrightness Controls the brightness of your bulbs
+ ledcolor Changes the color and brightness of your rgb bulbs when bound to a colorpicker
+ or just the brightness if bound to a Dimmer or controls On/Off if bound to a switch.
+ animation_mode_relative Changes the animation mode. Use an IncreaseDecrease type of widget
For rgbLed bulbs these channels are supported:
- lednightmode Dims your bulbs to a very low level to use them as a night light
- ledwhitemode Disable all color (saturation is 0)
- ledbrightness Controls the brightness of your bulbs
- ledcolor Changes the color and brightness of your rgb bulbs when bound to a colorpicker
- or just the brightness if bound to a Dimmer or controls On/Off if bound to a switch.
- animation_mode_relative Changes the animation mode. Use an IncreaseDecrease type of widget.
+ lednightmode Dims your bulbs to a very low level to use them as a night light
+ ledwhitemode Disable all color (saturation is 0)
+ ledbrightness Controls the brightness of your bulbs
+ ledcolor Changes the color and brightness of your rgb bulbs when bound to a colorpicker
+ or just the brightness if bound to a Dimmer or controls On/Off if bound to a switch
+ animation_mode_relative Changes the animation mode. Use an IncreaseDecrease type of widget
animation_speed_relative Changes the speed of your chosen animation mode
For rgbwLed/rgbwwLed bulbs these channels are supported:
- lednightmode Dims your bulbs to a very low level to use them as a night light
- ledwhitemode Disable all color (saturation is 0)
- ledbrightness Controls the brightness of your bulbs
- ledsaturation Controls the saturation of your bulbs (not for rgbwLed!)
- ledtemperature Changes from cold white to warm white and vice versa (not for rgbwLed!)
- ledcolor Changes the color and brightness of your rgb bulbs when bound to a colorpicker
- or just the brightness if bound to a Dimmer or controls On/Off if bound to a switch.
- animation_mode Changes the animation mode. Chose between animation mode 1 to 9.
- animation_mode_relative Changes the animation mode. Use an IncreaseDecrease type of widget.
+ lednightmode Dims your bulbs to a very low level to use them as a night light
+ ledwhitemode Disable all color (saturation is 0)
+ ledbrightness Controls the brightness of your bulbs
+ ledsaturation Controls the saturation of your bulbs (not for rgbwLed!)
+ ledtemperature Changes from cold white to warm white and vice versa (not for rgbwLed!)
+ ledcolor Changes the color and brightness of your rgb bulbs when bound to a colorpicker
+ or just the brightness if bound to a Dimmer or controls On/Off if bound to a switch
+ animation_mode Changes the animation mode. Chose between animation mode 1 to 9
+ animation_mode_relative Changes the animation mode. Use an IncreaseDecrease type of widget
animation_speed_relative Changes the speed of your chosen animation mode
- ledlink Sync bulb to this zone within 3 seconds of light bulb socket power on
- ledunlink Clear bulb from this zone within 3 seconds of light bulb socket power on
+ ledlink Sync bulb to this zone within 3 seconds of light bulb socket power on
+ ledunlink Clear bulb from this zone within 3 seconds of light bulb socket power on
-[(See the API)](http://www.limitlessled.com/dev/).
Limitations:
.items
```
-Switch Light_Groundfloor {channel="milight:whiteLed:ACCF23A6C0B4:0:ledbrightness"} # Switch for all white bulbs
-Dimmer Light_LivingroomB {channel="milight:whiteLed:ACCF23A6C0B4:1:ledbrightness"} # Dimmer changing brightness for bulb in zone 1
-Dimmer Light_LivingroomC {channel="milight:whiteLed:ACCF23A6C0B4:1:ledtemperature"} # Dimmer changing colorTemperature for bulb in zone 1
-Dimmer RGBW_LivingroomB {channel="milight:rgbwLed:ACCF23A6C0B4:2:ledbrightness"} # Dimmer changing brightness for RGBW bulb in zone 2
-Color Light_Party {channel="milight:rgbwLed:ACCF23A6C0B4:1:ledcolor"}# Colorpicker for rgb bulbs
+Switch Light_Groundfloor {channel="milight:whiteLed:ACCF23A6C0B4:0:ledbrightness"} //Switch for all white bulbs
+Dimmer Light_LivingroomB {channel="milight:whiteLed:ACCF23A6C0B4:1:ledbrightness"} //Dimmer changing brightness for bulb in zone 1
+Dimmer Light_LivingroomC {channel="milight:whiteLed:ACCF23A6C0B4:1:ledtemperature"} //Dimmer changing colorTemperature for bulb in zone 1
+Dimmer RGBW_LivingroomB {channel="milight:rgbwLed:ACCF23A6C0B4:2:ledbrightness"} //Dimmer changing brightness for RGBW bulb in zone 2
+Color Light_Party {channel="milight:rgbwLed:ACCF23A6C0B4:1:ledcolor"} //Colorpicker for rgb bulbs
-# You have to link the items to the channels of your prefered group e.g. in Paper UI after you have saved
-# your items file.
+//You have to link the items to the channels of your prefered group e.g. in Paper UI after you have saved your items file.
-# The command types nightMode and whiteMode are stateless and should be configured as pushbuttons as they only support a trigger action:
-Switch Light_GroundfloorN {channel="milight:whiteLed:ACCF23A6C0B4:0:lednightmode", autoupdate="false"} # Activate the NightMode for all bulbs
+//The command types nightMode and whiteMode are stateless and should be configured as pushbuttons as they only support a trigger action:
+Switch Light_GroundfloorN {channel="milight:whiteLed:ACCF23A6C0B4:0:lednightmode", autoupdate="false"} //Activate the NightMode for all bulbs
-# The command types animation_mode_relative and animation_speed are stateless and should be configured as pushbuttons as they only support INCREASE and DECREASE commands:
+//The command types animation_mode_relative and animation_speed are stateless and should be configured as pushbuttons as they only support INCREASE and DECREASE commands:
Dimmer AnimationMode {channel="milight:rgbLed:ACCF23A6C0B4:5:animation_mode_relative", autoupdate="false"}
Dimmer AnimationSpeed {channel="milight:rgbLed:ACCF23A6C0B4:5:animation_speed", autoupdate="false"}
-# Animation Mode for RGBWW bulbs is different, it allows to pick a mode directly.
+//Animation Mode for RGBWW bulbs is different, it allows to pick a mode directly.
Switch AnimationModeRgbWW {channel="milight:rgbwwLed:ACCF23A6C0B4:5:animation_mode"}
```
.sitemap
```
-Switch item=AnimationMode mappings=[DECREASE='-', INCREASE='+']
-Switch item=AnimationSpeed mappings=[DECREASE='-', INCREASE='+']
+Switch item=AnimationMode mappings=[DECREASE='-', INCREASE='+']
+Switch item=AnimationSpeed mappings=[DECREASE='-', INCREASE='+']
Switch item=Light_GroundfloorN mappings=[ON='Night Mode']
```
projects / openhab-addons.git / commitdiff