This allows these files to be used for creating translations with Crowdin.
Signed-off-by: Wouter Born <github@maindrain.net>
--- /dev/null
+# binding
+binding_name = digitalSTROM-Binding
+binding_desc = The digitalSTROM-Binding integrates the digitalSTROM-System and allows to control the included devices and call scenes.
+
+#dss-bridge
+dSS_label = digitalSTROM-Server
+dSS_desc = The digitalSTROM-Server represents an interface to the digitalSTROM-System.
+#group-parms
+dss_param_group_connection_label = Connection configuration
+dss_param_group_connection_desc = Sets the configuration to establish the connection to the digitalSTROM-Server.
+
+dss_param_group_general_label = General configuration
+dss_param_group_general_desc = Here you can configure some general parameters.
+
+dss_param_group_info_label = Server information
+dss_param_group_info_desc = Shows information of the digitalSTROM-Server.
+
+#parameters
+dss_param_app_token_label = Application-Token
+dss_param_app_token_desc = The Application-Token to authenticate to the digitalSTROM-Server.
+
+dss_param_ip_address_label = Network address
+dss_param_ip_address_desc = Network address of the digitalSTROM-Server. <b>Note:</b> If the host dosen't use the default port (8080), the port has to be set after the host name. e.g. <i>my-digitalSTROM-Server.com:58080</i>
+
+dss_param_username_label = User name
+dss_param_username_desc = Name of a registered user to authenticate to the digitalSTROM-Server.
+
+dss_param_password_label = Password
+dss_param_password_desc = Password of a registered user to authenticate to the digitalSTROM-Server.
+
+dss_param_dsid_label = dSID
+dss_param_dsid_desc = The unique identifier of a digitalSTROM-Severs.
+
+dss_param_sensor_inter_label = Sensor update interval
+dss_param_sensor_inter_desc = Sets the seconds after the digitalSTROM-device sensor data will be updated. If the priority is higher then 'never'.
+
+dss_param_total_power_inter_label = Total power update interval
+dss_param_total_power_inter_desc = Sets the interval in seconds, after the digitalSTROM total power consumption and total electric meter sensor data will be updated.
+
+dss_param_sensor_wait_label = Wait time sensor reading
+dss_param_sensor_wait_desc = Waiting time between the evaluation of the sensor values and the reading of the scenes in seconds. <b>ATTENTION:<b> digitalSTROM Rule 8 and 9 require a waiting period of 1 minute. Values less than 60 seconds could affect the digitalSTROM system.
+
+dss_param_trash_delete_label = Days to be slaked trash bin devices
+dss_param_trash_delete_desc = Sets the days after the temporary saved digitalSTROM-device configuration from not reachable digitalSTROM-devices get permanently deleted.
+
+#device
+ge_label = GE-Device (yellow)
+ge_desc = Represents a digitalSTROM light device.
+
+sw_label = SW-Device (black)
+sw_desc = Represents a digitalSTROM joker device.
+
+gr_label = GR-Device (gray)
+gr_desc = Represents a digitalSTROM shade device.
+
+bl_label = BL-Device (gray)
+bl_desc = Represents a digitalSTROM heating device.
+
+dsisens200_label = dS-iSens200-Device
+dsisens200_desc = Represents the digitalSTROM sensor device dS-iSens200 for indoor temperature and relative humidity.
+
+circuit_label = digitalSTROM-Meter
+circuit_desc = The digitalSTROM-Meter represents a circuit and indicates active power, electric meter and consumption values.
+
+#group-parms
+device_param_group_info_label = Device information
+device_param_group_info_desc = Shows information of the digitalSTROM-device.
+
+device_param_group_sensor_label = Sensor setup
+device_param_group_sensor_desc = Here you can configure the priorities for updating the device sensor values.
+
+#parms
+device_param_active_power_label = Active power refresh priority
+device_param_active_power_desc = Sets the refresh priority for the active power sensor value. Can be never, low priority, medium priority or high priority.
+
+device_param_electric_meter_label = Electric meter refresh priority
+device_param_electric_meter_desc = Sets the refresh priority for the electric meter sensor value. Can be never, low priority, medium priority or high priority.
+
+device_param_output_current_label = Output current refresh priority
+device_param_output_current_desc = Sets the refresh priority for the output current sensor value. Can be never, low priority, medium priority or high priority.
+
+DS_SENSOR_OPTION1 = never
+DS_SENSOR_OPTION2 = low
+DS_SENSOR_OPTION3 = medium
+DS_SENSOR_OPTION4 = high
+
+#scene
+app_scene_label = Apartment-Scene
+app_scene_desc = Represents a digitalSTROM Apartment-Scene.
+
+zone_scene_label = Zone-Scene
+zone_scene_desc = Represents a digitalSTROM Zone-Scene.
+
+group_scene_label = Group-Scene
+group_scene_desc = Represents a digitalSTROM Group-Scene.
+
+named_scene_label = Named-Scene
+named_scene_desc = Represents a digitalSTROM Scene, which has a user defined name.
+
+#parms
+param_scene_zone_id_label = Zone ID or name
+param_scene_zone_id_desc = The zone id or zone name of the called scene. 0 or empty is broadcast to all.
+
+param_scene_group_id_label = Group ID or name
+param_scene_group_id_desc = The group id or group name of the called scene. 0 or empty is broadcast to all.
+
+param_scene_id_label = Scene ID
+param_scene_id_desc = The call scene ID or scene name, e.g. preset 1 for scene ID 5. Callable scenes are from 0 to 126.
+
+# dynamic channel building
+light_dimmer_label = Light dimmer
+light_dimmer_desc = The brightness channel allows to dimm a light device.
+
+light_switch_label = Light switch
+light_switch_desc = The light switch channel allows to turn a light device on or off.
+
+shade_label = Position control
+shade_desc = The position control channel allows to control the relative position in percent e.g. of rollershutters or awnings.
+
+shade_angle_label = Slat control
+shade_angle_desc = The slat control channel allows to control the relative slat position in percent of blinds.
+
+general_dimmer_label = Device power control
+general_dimmer_desc = The device power control channel allows to control the power of a device e.g. a ceiling fan.
+
+general_switch_label = Device switch
+general_switch_desc = The device switch channel allows to turn a device on or off e.g. a HIFI-System.
+
+light_2_stage_label = 2 stage light switch
+light_2_stage_desc = The 2 stage lightswitch channel allows to turn both relais of the device on or off or switch only 1 of the both relais on or off.
+
+light_3_stage_label = 3 stage light switch
+light_3_stage_desc = The 3 stage light channel allows to turn both relais of the device on or off or switch both relais of the device separated from each other on or off.
+
+general_2_stage_label = 2 stage device switch
+general_2_stage_desc = The 2 stage device switch channel allows to turn both relais of the device on or off or switch only 1 of the both relais on or off.
+
+general_3_stage_label = 3 stage device switch
+general_3_stage_desc = The 3 stage device channel allows to turn both relais of the device on or off or switch both relais of the device separated from each other on or off.
+
+scene_label = Scene
+scene_desc = The scene channel allows to call or undo a scene from digitalSTROM.
+
+heating_switch_label = Heating Switch
+heating_switch_desc = The heating switch channel allows to turn a heating device on or off.
+
+heating_dimmer_label = heating dimmer
+heating_dimmer_desc = The heating dimmer channel allows to control the value in percent of heating valve.
+
+heating_temperature_controlled_label = Heating temperature controlled
+heating_temperature_controlled_desc = The heating temperature controlled channel allows to control the temperature through the digitalSTROM automatics.
+
+#dynamic sensor channel building
+active_power_label = Active power
+active_power_desc = This channel indicates the current active power in Watt (W) of the device.
+
+output_current_label = Output current
+output_current_desc = This channel indicates the current output current in milliampere (mA) of the device.
+
+electric_meter_label = Electric meter
+electric_meter_desc = This channel indicates the current electric meter in kilowatt hours (kWh) of the device.
+
+temperature_indoors_label = Temperature indoors
+temperature_indoors_desc = This channel indicates the current temperature indoors in Celsius (°C) of the device.
+
+temperature_outdoors_label = Temperature outdoors
+temperature_outdoors_desc = This channel indicates the current temperature outdoors in Celsius (°C) of the device.
+
+brightness_indoors_label = Brightness indoors
+brightness_indoors_desc = This channel indicates the current brightness indoors in Lux (Lx) of the device.
+
+brightness_outdoors_label = Brightness outdoors
+brightness_outdoors_desc = This channel indicates the current brightness outdoors in Lux (Lx) of the device.
+
+relative_humidity_indoors_label = Relative humidity indoors
+relative_humidity_indoors_desc = This channel indicates the current relative humidity indoors in percent of the device.
+
+relative_humidity_outdoors_label = Relative humidity outdoors
+relative_humidity_outdoors_desc = This channel indicates the current relative humidity outdoors in percent of the device.
+
+air_pressure_label = Air pressure
+air_pressure_desc = This channel indicates the current relative humidity outdoors in hectopscal (hPa bzw. mbar) of the device.
+
+wind_speed_label = Wind speed
+wind_speed_desc = This channel indicates the current wind speed in m/s of the device.
+
+wind_direction_label = Wind direction
+wind_direction_desc = This channel indicates the current wind direction in degree of the device.
+
+precipitation_label = Precipitation
+precipitation_desc = This channel indicates the current precipitation in milliliter per square meter of the device.
+
+carbon_dioxide_label = Carbon dioxide
+carbon_dioxide_desc = This channel indicates the current carbon dioxide in parts per million of the device.
+
+sound_pressure_level_label = Sound pressure level
+sound_pressure_level_desc = This channel indicates the current carbon dioxide in Dezibel (dB) of the device.
+
+room_temperation_set_point_label = Room temperation set point
+room_temperation_set_point_desc = This channel indicates the current room temperation set point in Celsius (°C) of the device.
+
+room_temperation_control_variable_label = Room temperation control variable
+room_temperation_control_variable_desc = This channel indicates the current room temperation control variable in Celsius (°C) of the device.
+
+output_current_h_label = Output current high
+output_current_h_label = This channel indicates the current room temperation control variable in milliamper (mA) of the device.
+
+power_consumption_label = Power consumption
+power_consumption_label = This channel indicates the current room temperation control variable in volt-ampere (VA) of the device.
+
+#dynamic metering channel building
+
+energy_Wh_label = Electric meter kWh
+energy_Wh_desc = This channel indicates the current electric meter in kilowatt hours (kWh) of all connected devices of this circuit.
+
+energy_Ws_label = Electric meter Ws
+energy_Ws_desc = This channel indicates the current electric meter in watt seconds (Ws) of all connected devices of this circuit.
+
+consumption_Wh_label = Active power
+consumption_Wh_desc = This channel indicates the current total active power in Watt (W) of all connected devices of this circuit.
+
+total_energy_Wh_label = Electric meter kWh
+total_energy_Wh_desc = This channel indicates the current total electric meter in kilowatt hours (kWh) of all connected circuits of the digitalSTROM-System.
+
+total_energy_Ws_label = Electric meter Ws
+total_energy_Ws_desc =This channel indicates the current total electric meter in watt seconds (Ws) of all connected circuits of the digitalSTROM-System.
+
+total_consumption_Wh_label = Total active power
+total_consumption_Wh_desc = This channel indicates the current total active power in Watt (W) of all connected circuits to the digitalSTROM-System.
+
+# zone temperature control
+
+zoneTemperatureControl_label = Temperature control
+zoneTemperatureControl_desc = Control of the target temperature of a zone/room.
+
+zoneTemperatureControl_parm_zoneID_label = Zone ID or name
+zoneTemperatureControl_parm_zoneID_desc = The zone id or zone name of the temperature controlled zone.
+
+#units
+watt = watt
+ampere = ampere
+kilowatt_hours = kilowatt hours
+kelvin = kelvin
+lux = lux
+percent = percent
+pascal = pascal
+meters_per_second = meters per second
+degrees = degrees
+millimeter_per_square_meter = millimeter per square meter
+parts_per_million = parts per million
+decibel = decibel
+volt_ampere = volt-ampere
+degrees_celsius = degrees celsius
+
+#Tags
+DS = digitalSTROM
+YELLOW = yellow
+BLACK = black
+JOKER = joker
+GREY = grey
+LIGHT = light
+SHADE_TAG = shade
+#ACTIVE_POWER = active power
+#ELECTRIC_METER = electric meter
+#OUTPUT_CURRENT = output current
+#POWER_CONSUMPTION = power consumption
+UMR = umr
+SCENE = scene
+
+#stage options
+general_stage_opt_0 = both relais off
+general_stage_opt_200 = both relais on
+general_stage_opt_90 = first relais on
+general_stage_opt_130 = second relais on
+
+light_stage_opt_0 = both/all lights off
+light_stage_opt_200 = both/all lights on
+light_stage_opt_90 = first light(s) on
+light_stage_opt_130 = second light(s) on
+
+#scene options
+#areas
+AREA_1_OFF = Area 1 Off
+AREA_1_ON = Area 1 On
+
+AREA_2_OFF = Area 2 Off
+AREA_2_ON = Area 2 On
+
+AREA_3_OFF = Area 3 Off
+AREA_3_ON = Area 3 On
+
+AREA_4_OFF = Area 4 Off
+AREA_4_ON = Area 4 On
+
+#presets
+PRESET_0 = Preset 0 (Default: Off)
+PRESET_1 = Preset 1 (Default: On)
+PRESET_2 = Preset 2
+PRESET_3 = Preset 3
+PRESET_4 = Preset 4
+
+PRESET_10 = Preset 10 (Default: Off)
+PRESET_11 = Preset 11 (Default: On)
+PRESET_12 = Preset 12
+PRESET_13 = Preset 13
+PRESET_14 = Preset 14
+
+PRESET_20 = Preset 20 (Default: Off)
+PRESET_21 = Preset 21 (Default: On)
+PRESET_22 = Preset 22
+PRESET_23 = Preset 23
+PRESET_24 = Preset 24
+
+PRESET_30 = Preset 30 (Default: Off)
+PRESET_31 = Preset 31 (Default: On)
+PRESET_32 = Preset 32
+PRESET_33 = Preset 33
+PRESET_34 = Preset 34
+
+PRESET_40 = Preset 40 (Default: Off)
+PRESET_41 = Preset 41 (Default: On)
+PRESET_42 = Preset 42
+PRESET_43 = Preset 43
+PRESET_44 = Preset 44
+
+#goup scenes
+AUTO_OFF = Fade off
+
+ #group independent scene commands
+DEEP_OFF = Deep Off
+STANDBY = Standby
+ABSENT = Leaving Home
+PRESENT = Coming Home
+SLEEPING = Sleeping
+WAKEUP = Wake Up
+DOOR_BELL = Door Bell
+PANIC = Panic
+FIRE = Fire
+ALARM_1 = Alarm 1
+ALARM_2 = Alarm 2
+ALARM_3 = Alarm 3
+ALARM_4 = Alarm 4
+WIND = Wind
+NO_WIND = No Wind
+RAIN = Rain
+NO_RAIN = No Rain
+HAIL = Hail
+NO_HAIL = No Hail
+
+# binary inputs
+binary_input_presence_label = Presence sensor
+binary_input_presence_desc = Will be activated, if a presence is detected.
+
+binary_input_brightness_label = Brightness sensor
+binary_input_brightness_desc = Will be activated, if the brightness is higher than a setted value.
+
+binary_input_presence_in_darkness_label = Presence in darkness sensor
+binary_input_presence_in_darkness_desc = Will be activated, if a presence is detected. Sensor has a integrated twilight sensor.
+
+binary_input_twilight_label = Twilight sensor
+binary_input_twilight_desc = Will be activated by twilight.
+
+binary_input_motion_label = Motion sensor
+binary_input_motion_desc = Will be activated, if a motion is detected.
+
+binary_input_motion_in_darkness_label = Motion in darkness sensor
+binary_input_motion_in_darkness_desc = Will be activated, if a motion is detected. Sensor has a integrated twilight sensor.
+
+binary_input_smoke_label = Smoke sensor
+binary_input_smoke_desc = Will be activated, if smoke is detected.
+
+binary_input_wind_strenght_above_limit_label = Wind guardian
+binary_input_wind_strenght_above_limit_desc = Will be activated, if wind strength is above a user adjusted limit.
+
+binary_input_rain_label = Rain sensor
+binary_input_rain_desc = Will be activated, if rain is detected.
+
+binary_input_sun_radiation_label = Sun radiation sensor
+binary_input_sun_radiation_desc = Will be activated, if the sun light is above threshold.
+
+binary_input_temperation_below_limit_label = Temperature below limit sensor
+binary_input_temperation_below_limit_desc = Will be activated, if the temperature is below a limit.
+
+binary_input_battery_status_is_low_label = Battery status is low sensor
+binary_input_battery_status_is_low_desc = Will be activated, if the battery status is low.
+
+binary_input_window_is_open_label = Window is open sensor
+binary_input_window_is_open_desc = Will be activated, if a window is open.
+
+binary_input_door_is_open_label = Door is open sensor
+binary_input_door_is_open_desc = Will be activated, if a door is open.
+
+binary_input_window_is_tilted_label = Window is tilted sensor
+binary_input_window_is_tilted_desc = Will be activated, if a window is tilted.
+
+binary_input_garage_door_is_open_label = Garage door is open sensor
+binary_input_garage_door_is_open_desc = Will be activated, if a garage door is open.
+
+binary_input_sun_protection_label = Sun protection sensor
+binary_input_sun_protection_desc = Will be activated, if the sun light is too heavy.
+
+binary_input_frost_label = Frost sensor
+binary_input_frost_desc = Will be activated by frost.
+
+binary_input_heating_operation_on_off_label = Heating operation on/off sensor
+binary_input_heating_operation_on_off_desc = Will be activated, if heating operation is on, otherwise it will be deactivated.
+
+binary_input_change_over_heating_cooling_label = Change over heating cooling sensor
+binary_input_change_over_heating_cooling_desc = Will be activated, if heating is activated, otherwise cooling is activated.
+++ /dev/null
-# binding
-binding_name = digitalSTROM-Binding
-binding_desc = The digitalSTROM-Binding integrates the digitalSTROM-System and allows to control the included devices and call scenes.
-
-#dss-bridge
-dSS_label = digitalSTROM-Server
-dSS_desc = The digitalSTROM-Server represents an interface to the digitalSTROM-System.
-#group-parms
-dss_param_group_connection_label = Connection configuration
-dss_param_group_connection_desc = Sets the configuration to establish the connection to the digitalSTROM-Server.
-
-dss_param_group_general_label = General configuration
-dss_param_group_general_desc = Here you can configure some general parameters.
-
-dss_param_group_info_label = Server information
-dss_param_group_info_desc = Shows information of the digitalSTROM-Server.
-
-#parameters
-dss_param_app_token_label = Application-Token
-dss_param_app_token_desc = The Application-Token to authenticate to the digitalSTROM-Server.
-
-dss_param_ip_address_label = Network address
-dss_param_ip_address_desc = Network address of the digitalSTROM-Server. <b>Note:</b> If the host dosen't use the default port (8080), the port has to be set after the host name. e.g. <i>my-digitalSTROM-Server.com:58080</i>
-
-dss_param_username_label = User name
-dss_param_username_desc = Name of a registered user to authenticate to the digitalSTROM-Server.
-
-dss_param_password_label = Password
-dss_param_password_desc = Password of a registered user to authenticate to the digitalSTROM-Server.
-
-dss_param_dsid_label = dSID
-dss_param_dsid_desc = The unique identifier of a digitalSTROM-Severs.
-
-dss_param_sensor_inter_label = Sensor update interval
-dss_param_sensor_inter_desc = Sets the seconds after the digitalSTROM-device sensor data will be updated. If the priority is higher then 'never'.
-
-dss_param_total_power_inter_label = Total power update interval
-dss_param_total_power_inter_desc = Sets the interval in seconds, after the digitalSTROM total power consumption and total electric meter sensor data will be updated.
-
-dss_param_sensor_wait_label = Wait time sensor reading
-dss_param_sensor_wait_desc = Waiting time between the evaluation of the sensor values and the reading of the scenes in seconds. <b>ATTENTION:<b> digitalSTROM Rule 8 and 9 require a waiting period of 1 minute. Values less than 60 seconds could affect the digitalSTROM system.
-
-dss_param_trash_delete_label = Days to be slaked trash bin devices
-dss_param_trash_delete_desc = Sets the days after the temporary saved digitalSTROM-device configuration from not reachable digitalSTROM-devices get permanently deleted.
-
-#device
-ge_label = GE-Device (yellow)
-ge_desc = Represents a digitalSTROM light device.
-
-sw_label = SW-Device (black)
-sw_desc = Represents a digitalSTROM joker device.
-
-gr_label = GR-Device (gray)
-gr_desc = Represents a digitalSTROM shade device.
-
-bl_label = BL-Device (gray)
-bl_desc = Represents a digitalSTROM heating device.
-
-dsisens200_label = dS-iSens200-Device
-dsisens200_desc = Represents the digitalSTROM sensor device dS-iSens200 for indoor temperature and relative humidity.
-
-circuit_label = digitalSTROM-Meter
-circuit_desc = The digitalSTROM-Meter represents a circuit and indicates active power, electric meter and consumption values.
-
-#group-parms
-device_param_group_info_label = Device information
-device_param_group_info_desc = Shows information of the digitalSTROM-device.
-
-device_param_group_sensor_label = Sensor setup
-device_param_group_sensor_desc = Here you can configure the priorities for updating the device sensor values.
-
-#parms
-device_param_active_power_label = Active power refresh priority
-device_param_active_power_desc = Sets the refresh priority for the active power sensor value. Can be never, low priority, medium priority or high priority.
-
-device_param_electric_meter_label = Electric meter refresh priority
-device_param_electric_meter_desc = Sets the refresh priority for the electric meter sensor value. Can be never, low priority, medium priority or high priority.
-
-device_param_output_current_label = Output current refresh priority
-device_param_output_current_desc = Sets the refresh priority for the output current sensor value. Can be never, low priority, medium priority or high priority.
-
-DS_SENSOR_OPTION1 = never
-DS_SENSOR_OPTION2 = low
-DS_SENSOR_OPTION3 = medium
-DS_SENSOR_OPTION4 = high
-
-#scene
-app_scene_label = Apartment-Scene
-app_scene_desc = Represents a digitalSTROM Apartment-Scene.
-
-zone_scene_label = Zone-Scene
-zone_scene_desc = Represents a digitalSTROM Zone-Scene.
-
-group_scene_label = Group-Scene
-group_scene_desc = Represents a digitalSTROM Group-Scene.
-
-named_scene_label = Named-Scene
-named_scene_desc = Represents a digitalSTROM Scene, which has a user defined name.
-
-#parms
-param_scene_zone_id_label = Zone ID or name
-param_scene_zone_id_desc = The zone id or zone name of the called scene. 0 or empty is broadcast to all.
-
-param_scene_group_id_label = Group ID or name
-param_scene_group_id_desc = The group id or group name of the called scene. 0 or empty is broadcast to all.
-
-param_scene_id_label = Scene ID
-param_scene_id_desc = The call scene ID or scene name, e.g. preset 1 for scene ID 5. Callable scenes are from 0 to 126.
-
-# dynamic channel building
-light_dimmer_label = Light dimmer
-light_dimmer_desc = The brightness channel allows to dimm a light device.
-
-light_switch_label = Light switch
-light_switch_desc = The light switch channel allows to turn a light device on or off.
-
-shade_label = Position control
-shade_desc = The position control channel allows to control the relative position in percent e.g. of rollershutters or awnings.
-
-shade_angle_label = Slat control
-shade_angle_desc = The slat control channel allows to control the relative slat position in percent of blinds.
-
-general_dimmer_label = Device power control
-general_dimmer_desc = The device power control channel allows to control the power of a device e.g. a ceiling fan.
-
-general_switch_label = Device switch
-general_switch_desc = The device switch channel allows to turn a device on or off e.g. a HIFI-System.
-
-light_2_stage_label = 2 stage light switch
-light_2_stage_desc = The 2 stage lightswitch channel allows to turn both relais of the device on or off or switch only 1 of the both relais on or off.
-
-light_3_stage_label = 3 stage light switch
-light_3_stage_desc = The 3 stage light channel allows to turn both relais of the device on or off or switch both relais of the device separated from each other on or off.
-
-general_2_stage_label = 2 stage device switch
-general_2_stage_desc = The 2 stage device switch channel allows to turn both relais of the device on or off or switch only 1 of the both relais on or off.
-
-general_3_stage_label = 3 stage device switch
-general_3_stage_desc = The 3 stage device channel allows to turn both relais of the device on or off or switch both relais of the device separated from each other on or off.
-
-scene_label = Scene
-scene_desc = The scene channel allows to call or undo a scene from digitalSTROM.
-
-heating_switch_label = Heating Switch
-heating_switch_desc = The heating switch channel allows to turn a heating device on or off.
-
-heating_dimmer_label = heating dimmer
-heating_dimmer_desc = The heating dimmer channel allows to control the value in percent of heating valve.
-
-heating_temperature_controlled_label = Heating temperature controlled
-heating_temperature_controlled_desc = The heating temperature controlled channel allows to control the temperature through the digitalSTROM automatics.
-
-#dynamic sensor channel building
-active_power_label = Active power
-active_power_desc = This channel indicates the current active power in Watt (W) of the device.
-
-output_current_label = Output current
-output_current_desc = This channel indicates the current output current in milliampere (mA) of the device.
-
-electric_meter_label = Electric meter
-electric_meter_desc = This channel indicates the current electric meter in kilowatt hours (kWh) of the device.
-
-temperature_indoors_label = Temperature indoors
-temperature_indoors_desc = This channel indicates the current temperature indoors in Celsius (°C) of the device.
-
-temperature_outdoors_label = Temperature outdoors
-temperature_outdoors_desc = This channel indicates the current temperature outdoors in Celsius (°C) of the device.
-
-brightness_indoors_label = Brightness indoors
-brightness_indoors_desc = This channel indicates the current brightness indoors in Lux (Lx) of the device.
-
-brightness_outdoors_label = Brightness outdoors
-brightness_outdoors_desc = This channel indicates the current brightness outdoors in Lux (Lx) of the device.
-
-relative_humidity_indoors_label = Relative humidity indoors
-relative_humidity_indoors_desc = This channel indicates the current relative humidity indoors in percent of the device.
-
-relative_humidity_outdoors_label = Relative humidity outdoors
-relative_humidity_outdoors_desc = This channel indicates the current relative humidity outdoors in percent of the device.
-
-air_pressure_label = Air pressure
-air_pressure_desc = This channel indicates the current relative humidity outdoors in hectopscal (hPa bzw. mbar) of the device.
-
-wind_speed_label = Wind speed
-wind_speed_desc = This channel indicates the current wind speed in m/s of the device.
-
-wind_direction_label = Wind direction
-wind_direction_desc = This channel indicates the current wind direction in degree of the device.
-
-precipitation_label = Precipitation
-precipitation_desc = This channel indicates the current precipitation in milliliter per square meter of the device.
-
-carbon_dioxide_label = Carbon dioxide
-carbon_dioxide_desc = This channel indicates the current carbon dioxide in parts per million of the device.
-
-sound_pressure_level_label = Sound pressure level
-sound_pressure_level_desc = This channel indicates the current carbon dioxide in Dezibel (dB) of the device.
-
-room_temperation_set_point_label = Room temperation set point
-room_temperation_set_point_desc = This channel indicates the current room temperation set point in Celsius (°C) of the device.
-
-room_temperation_control_variable_label = Room temperation control variable
-room_temperation_control_variable_desc = This channel indicates the current room temperation control variable in Celsius (°C) of the device.
-
-output_current_h_label = Output current high
-output_current_h_label = This channel indicates the current room temperation control variable in milliamper (mA) of the device.
-
-power_consumption_label = Power consumption
-power_consumption_label = This channel indicates the current room temperation control variable in volt-ampere (VA) of the device.
-
-#dynamic metering channel building
-
-energy_Wh_label = Electric meter kWh
-energy_Wh_desc = This channel indicates the current electric meter in kilowatt hours (kWh) of all connected devices of this circuit.
-
-energy_Ws_label = Electric meter Ws
-energy_Ws_desc = This channel indicates the current electric meter in watt seconds (Ws) of all connected devices of this circuit.
-
-consumption_Wh_label = Active power
-consumption_Wh_desc = This channel indicates the current total active power in Watt (W) of all connected devices of this circuit.
-
-total_energy_Wh_label = Electric meter kWh
-total_energy_Wh_desc = This channel indicates the current total electric meter in kilowatt hours (kWh) of all connected circuits of the digitalSTROM-System.
-
-total_energy_Ws_label = Electric meter Ws
-total_energy_Ws_desc =This channel indicates the current total electric meter in watt seconds (Ws) of all connected circuits of the digitalSTROM-System.
-
-total_consumption_Wh_label = Total active power
-total_consumption_Wh_desc = This channel indicates the current total active power in Watt (W) of all connected circuits to the digitalSTROM-System.
-
-# zone temperature control
-
-zoneTemperatureControl_label = Temperature control
-zoneTemperatureControl_desc = Control of the target temperature of a zone/room.
-
-zoneTemperatureControl_parm_zoneID_label = Zone ID or name
-zoneTemperatureControl_parm_zoneID_desc = The zone id or zone name of the temperature controlled zone.
-
-#units
-watt = watt
-ampere = ampere
-kilowatt_hours = kilowatt hours
-kelvin = kelvin
-lux = lux
-percent = percent
-pascal = pascal
-meters_per_second = meters per second
-degrees = degrees
-millimeter_per_square_meter = millimeter per square meter
-parts_per_million = parts per million
-decibel = decibel
-volt_ampere = volt-ampere
-degrees_celsius = degrees celsius
-
-#Tags
-DS = digitalSTROM
-YELLOW = yellow
-BLACK = black
-JOKER = joker
-GREY = grey
-LIGHT = light
-SHADE_TAG = shade
-#ACTIVE_POWER = active power
-#ELECTRIC_METER = electric meter
-#OUTPUT_CURRENT = output current
-#POWER_CONSUMPTION = power consumption
-UMR = umr
-SCENE = scene
-
-#stage options
-general_stage_opt_0 = both relais off
-general_stage_opt_200 = both relais on
-general_stage_opt_90 = first relais on
-general_stage_opt_130 = second relais on
-
-light_stage_opt_0 = both/all lights off
-light_stage_opt_200 = both/all lights on
-light_stage_opt_90 = first light(s) on
-light_stage_opt_130 = second light(s) on
-
-#scene options
-#areas
-AREA_1_OFF = Area 1 Off
-AREA_1_ON = Area 1 On
-
-AREA_2_OFF = Area 2 Off
-AREA_2_ON = Area 2 On
-
-AREA_3_OFF = Area 3 Off
-AREA_3_ON = Area 3 On
-
-AREA_4_OFF = Area 4 Off
-AREA_4_ON = Area 4 On
-
-#presets
-PRESET_0 = Preset 0 (Default: Off)
-PRESET_1 = Preset 1 (Default: On)
-PRESET_2 = Preset 2
-PRESET_3 = Preset 3
-PRESET_4 = Preset 4
-
-PRESET_10 = Preset 10 (Default: Off)
-PRESET_11 = Preset 11 (Default: On)
-PRESET_12 = Preset 12
-PRESET_13 = Preset 13
-PRESET_14 = Preset 14
-
-PRESET_20 = Preset 20 (Default: Off)
-PRESET_21 = Preset 21 (Default: On)
-PRESET_22 = Preset 22
-PRESET_23 = Preset 23
-PRESET_24 = Preset 24
-
-PRESET_30 = Preset 30 (Default: Off)
-PRESET_31 = Preset 31 (Default: On)
-PRESET_32 = Preset 32
-PRESET_33 = Preset 33
-PRESET_34 = Preset 34
-
-PRESET_40 = Preset 40 (Default: Off)
-PRESET_41 = Preset 41 (Default: On)
-PRESET_42 = Preset 42
-PRESET_43 = Preset 43
-PRESET_44 = Preset 44
-
-#goup scenes
-AUTO_OFF = Fade off
-
- #group independent scene commands
-DEEP_OFF = Deep Off
-STANDBY = Standby
-ABSENT = Leaving Home
-PRESENT = Coming Home
-SLEEPING = Sleeping
-WAKEUP = Wake Up
-DOOR_BELL = Door Bell
-PANIC = Panic
-FIRE = Fire
-ALARM_1 = Alarm 1
-ALARM_2 = Alarm 2
-ALARM_3 = Alarm 3
-ALARM_4 = Alarm 4
-WIND = Wind
-NO_WIND = No Wind
-RAIN = Rain
-NO_RAIN = No Rain
-HAIL = Hail
-NO_HAIL = No Hail
-
-# binary inputs
-binary_input_presence_label = Presence sensor
-binary_input_presence_desc = Will be activated, if a presence is detected.
-
-binary_input_brightness_label = Brightness sensor
-binary_input_brightness_desc = Will be activated, if the brightness is higher than a setted value.
-
-binary_input_presence_in_darkness_label = Presence in darkness sensor
-binary_input_presence_in_darkness_desc = Will be activated, if a presence is detected. Sensor has a integrated twilight sensor.
-
-binary_input_twilight_label = Twilight sensor
-binary_input_twilight_desc = Will be activated by twilight.
-
-binary_input_motion_label = Motion sensor
-binary_input_motion_desc = Will be activated, if a motion is detected.
-
-binary_input_motion_in_darkness_label = Motion in darkness sensor
-binary_input_motion_in_darkness_desc = Will be activated, if a motion is detected. Sensor has a integrated twilight sensor.
-
-binary_input_smoke_label = Smoke sensor
-binary_input_smoke_desc = Will be activated, if smoke is detected.
-
-binary_input_wind_strenght_above_limit_label = Wind guardian
-binary_input_wind_strenght_above_limit_desc = Will be activated, if wind strength is above a user adjusted limit.
-
-binary_input_rain_label = Rain sensor
-binary_input_rain_desc = Will be activated, if rain is detected.
-
-binary_input_sun_radiation_label = Sun radiation sensor
-binary_input_sun_radiation_desc = Will be activated, if the sun light is above threshold.
-
-binary_input_temperation_below_limit_label = Temperature below limit sensor
-binary_input_temperation_below_limit_desc = Will be activated, if the temperature is below a limit.
-
-binary_input_battery_status_is_low_label = Battery status is low sensor
-binary_input_battery_status_is_low_desc = Will be activated, if the battery status is low.
-
-binary_input_window_is_open_label = Window is open sensor
-binary_input_window_is_open_desc = Will be activated, if a window is open.
-
-binary_input_door_is_open_label = Door is open sensor
-binary_input_door_is_open_desc = Will be activated, if a door is open.
-
-binary_input_window_is_tilted_label = Window is tilted sensor
-binary_input_window_is_tilted_desc = Will be activated, if a window is tilted.
-
-binary_input_garage_door_is_open_label = Garage door is open sensor
-binary_input_garage_door_is_open_desc = Will be activated, if a garage door is open.
-
-binary_input_sun_protection_label = Sun protection sensor
-binary_input_sun_protection_desc = Will be activated, if the sun light is too heavy.
-
-binary_input_frost_label = Frost sensor
-binary_input_frost_desc = Will be activated by frost.
-
-binary_input_heating_operation_on_off_label = Heating operation on/off sensor
-binary_input_heating_operation_on_off_desc = Will be activated, if heating operation is on, otherwise it will be deactivated.
-
-binary_input_change_over_heating_cooling_label = Change over heating cooling sensor
-binary_input_change_over_heating_cooling_desc = Will be activated, if heating is activated, otherwise cooling is activated.
--- /dev/null
+# Text used in the source code.
+
+# meter kind names
+meterKind.invalid.label = Invalid Meter
+meterKind.device.label = Generic DSMR Device
+meterKind.main_electricity.label = Main Electricity Meter
+meterKind.gas.label = Gas Meter
+meterKind.heating.label = Heating Meter
+meterKind.cooling.label = Cooling Meter
+meterKind.water.label = Water Meter
+meterKind.generic.label = Generic Meter
+meterKind.gj.label = GJ Meter
+meterKind.m3.label = M3 Meter
+meterKind.slave_electricity1.label = Slave Electricity Meter
+meterKind.slave_electricity2.label = Slave Electricity Meter 2
+
+# Connector error messages
+error.bridge.nodata = Not receiving data from meter.
+error.configuration.invalidmetertype = The thing could not be initialized. Delete and re-add thing if the problem persists.
+error.configuration.invalidsmartykey = The given Smarty decyption key is to short. The decyption key must be 32 characters long.
+error.thing.nodata = Not receiving data from meter.
+error.connector.dont_exists = Serial port does not exist.
+error.connector.in_use = Serial port is already in use.
+error.connector.internal_error = Unexpected error, possible bug. Please report.
+error.connector.not_compatible = Serial port is not compatible.
+error.connector.read_error = Read error.
+
+# thing types
+thing-type.dsmr.dsmrBridge.label = Smart Meter
+thing-type.dsmr.dsmrBridge.description = The Dutch Smart Meter (DSMR)
+thing-type.dsmr.smartyBridge.label = Smarty Meter
+thing-type.dsmr.smartyBridge.description = The Luxembourgian Smart Meter 'Smarty'
+++ /dev/null
-# Text used in the source code.
-
-# meter kind names
-meterKind.invalid.label = Invalid Meter
-meterKind.device.label = Generic DSMR Device
-meterKind.main_electricity.label = Main Electricity Meter
-meterKind.gas.label = Gas Meter
-meterKind.heating.label = Heating Meter
-meterKind.cooling.label = Cooling Meter
-meterKind.water.label = Water Meter
-meterKind.generic.label = Generic Meter
-meterKind.gj.label = GJ Meter
-meterKind.m3.label = M3 Meter
-meterKind.slave_electricity1.label = Slave Electricity Meter
-meterKind.slave_electricity2.label = Slave Electricity Meter 2
-
-# Connector error messages
-error.bridge.nodata = Not receiving data from meter.
-error.configuration.invalidmetertype = The thing could not be initialized. Delete and re-add thing if the problem persists.
-error.configuration.invalidsmartykey = The given Smarty decyption key is to short. The decyption key must be 32 characters long.
-error.thing.nodata = Not receiving data from meter.
-error.connector.dont_exists = Serial port does not exist.
-error.connector.in_use = Serial port is already in use.
-error.connector.internal_error = Unexpected error, possible bug. Please report.
-error.connector.not_compatible = Serial port is not compatible.
-error.connector.read_error = Read error.
-
-# thing types
-thing-type.dsmr.dsmrBridge.label = Smart Meter
-thing-type.dsmr.dsmrBridge.description = The Dutch Smart Meter (DSMR)
-thing-type.dsmr.smartyBridge.label = Smarty Meter
-thing-type.dsmr.smartyBridge.description = The Luxembourgian Smart Meter 'Smarty'
--- /dev/null
+error.nodata=No Data
+envoy.global.ok=Normal
+
+envoy.cond_flags.acb_ctrl.bmuhardwareerror=BMU Hardware Error
+envoy.cond_flags.acb_ctrl.bmuimageerror=BMU Image Error
+envoy.cond_flags.acb_ctrl.bmumaxcurrentwarning=BMU Max Current Warning
+envoy.cond_flags.acb_ctrl.bmusenseerror=BMU Sense Error
+
+envoy.cond_flags.acb_ctrl.cellmaxtemperror=Cell Max Temperature Error
+envoy.cond_flags.acb_ctrl.cellmaxtempwarning=Cell Max Temperature Warning
+envoy.cond_flags.acb_ctrl.cellmaxvoltageerror=Cell Max Voltage Error
+envoy.cond_flags.acb_ctrl.cellmaxvoltagewarning=Cell Max Voltage Warning
+envoy.cond_flags.acb_ctrl.cellmintemperror=Cell Min Temperature Error
+envoy.cond_flags.acb_ctrl.cellmintempwarning=Cell Min Temperature Warning
+envoy.cond_flags.acb_ctrl.cellminvoltageerror=Cell Min Voltage Error
+envoy.cond_flags.acb_ctrl.cellminvoltagewarning=Cell Min Voltage Warning
+envoy.cond_flags.acb_ctrl.cibcanerror=CIB CAN Error
+envoy.cond_flags.acb_ctrl.cibimageerror=CIB Image Error
+envoy.cond_flags.acb_ctrl.cibspierror=CIB SPI Error"
+envoy.cond_flags.obs_strs.discovering=Discovering
+envoy.cond_flags.obs_strs.failure=Failure to report
+envoy.cond_flags.obs_strs.flasherror=Flash Error
+envoy.cond_flags.obs_strs.notmonitored=Not Monitored
+envoy.cond_flags.obs_strs.ok=Normal
+envoy.cond_flags.obs_strs.plmerror=PLM Error
+envoy.cond_flags.obs_strs.secmodeenterfailure=Secure mode enter failure
+envoy.cond_flags.obs_strs.secmodeexitfailure=Secure mode exit failure
+envoy.cond_flags.obs_strs.sleeping=Sleeping"
+
+envoy.cond_flags.pcu_chan.acMonitorError=AC Monitor Error
+envoy.cond_flags.pcu_chan.acfrequencyhigh=AC Frequency High
+envoy.cond_flags.pcu_chan.acfrequencylow=AC Frequency Low
+envoy.cond_flags.pcu_chan.acfrequencyoor=AC Frequency Out Of Range
+envoy.cond_flags.pcu_chan.acvoltage_avg_hi=AC Voltage Average High
+envoy.cond_flags.pcu_chan.acvoltagehigh=AC Voltage High
+envoy.cond_flags.pcu_chan.acvoltagelow=AC Voltage Low
+envoy.cond_flags.pcu_chan.acvoltageoor=AC Voltage Out Of Range
+envoy.cond_flags.pcu_chan.acvoltageoosp1=AC Voltage Out Of Range - Phase 1
+envoy.cond_flags.pcu_chan.acvoltageoosp2=AC Voltage Out Of Range - Phase 2
+envoy.cond_flags.pcu_chan.acvoltageoosp3=AC Voltage Out Of Range - Phase 3
+envoy.cond_flags.pcu_chan.agfpowerlimiting=AGF Power Limiting
+envoy.cond_flags.pcu_chan.dcresistancelow=DC Resistance Low
+envoy.cond_flags.pcu_chan.dcresistancelowpoweroff=DC Resistance Low - Power Off
+envoy.cond_flags.pcu_chan.dcvoltagetoohigh=DC Voltage Too High
+envoy.cond_flags.pcu_chan.dcvoltagetoolow=DC Voltage Too Low
+envoy.cond_flags.pcu_chan.dfdt=AC Frequency Changing too Fast
+envoy.cond_flags.pcu_chan.gfitripped=GFI Tripped
+envoy.cond_flags.pcu_chan.gridgone=Grid Gone
+envoy.cond_flags.pcu_chan.gridinstability=Grid Instability
+envoy.cond_flags.pcu_chan.gridoffsethi=Grid Offset Hi
+envoy.cond_flags.pcu_chan.gridoffsetlow=Grid Offset Low
+envoy.cond_flags.pcu_chan.hardwareError=Hardware Error
+envoy.cond_flags.pcu_chan.hardwareWarning=Hardware Warning
+envoy.cond_flags.pcu_chan.highskiprate=High Skip Rate
+envoy.cond_flags.pcu_chan.invalidinterval=Invalid Interval
+envoy.cond_flags.pcu_chan.pwrgenoffbycmd=Power generation off by command
+envoy.cond_flags.pcu_chan.skippedcycles=Skipped Cycles
+envoy.cond_flags.pcu_chan.vreferror=Voltage Ref Error"
+
+envoy.cond_flags.pcu_ctrl.alertactive=Alert Active
+envoy.cond_flags.pcu_ctrl.altpwrgenmode=Alternate Power Generation Mode
+envoy.cond_flags.pcu_ctrl.altvfsettings=Alternate Voltage and Frequency Settings
+envoy.cond_flags.pcu_ctrl.badflashimage=Bad Flash Image
+envoy.cond_flags.pcu_ctrl.bricked=No Grid Profile
+envoy.cond_flags.pcu_ctrl.commandedreset=Commanded Reset
+envoy.cond_flags.pcu_ctrl.criticaltemperature=Critical Temperature
+envoy.cond_flags.pcu_ctrl.dc-pwr-low=DC Power Too Low
+envoy.cond_flags.pcu_ctrl.iuplinkproblem=IUP Link Problem
+envoy.cond_flags.pcu_ctrl.manutestmode=In Manu Test Mode
+envoy.cond_flags.pcu_ctrl.nsync=Grid Perturbation Unsynchronized
+envoy.cond_flags.pcu_ctrl.overtemperature=Over Temperature
+envoy.cond_flags.pcu_ctrl.poweronreset=Power On Reset
+envoy.cond_flags.pcu_ctrl.pwrgenoffbycmd=Power generation off by command
+envoy.cond_flags.pcu_ctrl.runningonac=Running on AC
+envoy.cond_flags.pcu_ctrl.tpmtest=Transient Grid Profile
+envoy.cond_flags.pcu_ctrl.unexpectedreset=Unexpected Reset
+envoy.cond_flags.pcu_ctrl.watchdogreset=Watchdog Reset
+
+envoy.cond_flags.rgm_chan.check_meter=Meter Error
+envoy.cond_flags.rgm_chan.power_quality=Poor Power Quality
+++ /dev/null
-error.nodata=No Data
-envoy.global.ok=Normal
-
-envoy.cond_flags.acb_ctrl.bmuhardwareerror=BMU Hardware Error
-envoy.cond_flags.acb_ctrl.bmuimageerror=BMU Image Error
-envoy.cond_flags.acb_ctrl.bmumaxcurrentwarning=BMU Max Current Warning
-envoy.cond_flags.acb_ctrl.bmusenseerror=BMU Sense Error
-
-envoy.cond_flags.acb_ctrl.cellmaxtemperror=Cell Max Temperature Error
-envoy.cond_flags.acb_ctrl.cellmaxtempwarning=Cell Max Temperature Warning
-envoy.cond_flags.acb_ctrl.cellmaxvoltageerror=Cell Max Voltage Error
-envoy.cond_flags.acb_ctrl.cellmaxvoltagewarning=Cell Max Voltage Warning
-envoy.cond_flags.acb_ctrl.cellmintemperror=Cell Min Temperature Error
-envoy.cond_flags.acb_ctrl.cellmintempwarning=Cell Min Temperature Warning
-envoy.cond_flags.acb_ctrl.cellminvoltageerror=Cell Min Voltage Error
-envoy.cond_flags.acb_ctrl.cellminvoltagewarning=Cell Min Voltage Warning
-envoy.cond_flags.acb_ctrl.cibcanerror=CIB CAN Error
-envoy.cond_flags.acb_ctrl.cibimageerror=CIB Image Error
-envoy.cond_flags.acb_ctrl.cibspierror=CIB SPI Error"
-envoy.cond_flags.obs_strs.discovering=Discovering
-envoy.cond_flags.obs_strs.failure=Failure to report
-envoy.cond_flags.obs_strs.flasherror=Flash Error
-envoy.cond_flags.obs_strs.notmonitored=Not Monitored
-envoy.cond_flags.obs_strs.ok=Normal
-envoy.cond_flags.obs_strs.plmerror=PLM Error
-envoy.cond_flags.obs_strs.secmodeenterfailure=Secure mode enter failure
-envoy.cond_flags.obs_strs.secmodeexitfailure=Secure mode exit failure
-envoy.cond_flags.obs_strs.sleeping=Sleeping"
-
-envoy.cond_flags.pcu_chan.acMonitorError=AC Monitor Error
-envoy.cond_flags.pcu_chan.acfrequencyhigh=AC Frequency High
-envoy.cond_flags.pcu_chan.acfrequencylow=AC Frequency Low
-envoy.cond_flags.pcu_chan.acfrequencyoor=AC Frequency Out Of Range
-envoy.cond_flags.pcu_chan.acvoltage_avg_hi=AC Voltage Average High
-envoy.cond_flags.pcu_chan.acvoltagehigh=AC Voltage High
-envoy.cond_flags.pcu_chan.acvoltagelow=AC Voltage Low
-envoy.cond_flags.pcu_chan.acvoltageoor=AC Voltage Out Of Range
-envoy.cond_flags.pcu_chan.acvoltageoosp1=AC Voltage Out Of Range - Phase 1
-envoy.cond_flags.pcu_chan.acvoltageoosp2=AC Voltage Out Of Range - Phase 2
-envoy.cond_flags.pcu_chan.acvoltageoosp3=AC Voltage Out Of Range - Phase 3
-envoy.cond_flags.pcu_chan.agfpowerlimiting=AGF Power Limiting
-envoy.cond_flags.pcu_chan.dcresistancelow=DC Resistance Low
-envoy.cond_flags.pcu_chan.dcresistancelowpoweroff=DC Resistance Low - Power Off
-envoy.cond_flags.pcu_chan.dcvoltagetoohigh=DC Voltage Too High
-envoy.cond_flags.pcu_chan.dcvoltagetoolow=DC Voltage Too Low
-envoy.cond_flags.pcu_chan.dfdt=AC Frequency Changing too Fast
-envoy.cond_flags.pcu_chan.gfitripped=GFI Tripped
-envoy.cond_flags.pcu_chan.gridgone=Grid Gone
-envoy.cond_flags.pcu_chan.gridinstability=Grid Instability
-envoy.cond_flags.pcu_chan.gridoffsethi=Grid Offset Hi
-envoy.cond_flags.pcu_chan.gridoffsetlow=Grid Offset Low
-envoy.cond_flags.pcu_chan.hardwareError=Hardware Error
-envoy.cond_flags.pcu_chan.hardwareWarning=Hardware Warning
-envoy.cond_flags.pcu_chan.highskiprate=High Skip Rate
-envoy.cond_flags.pcu_chan.invalidinterval=Invalid Interval
-envoy.cond_flags.pcu_chan.pwrgenoffbycmd=Power generation off by command
-envoy.cond_flags.pcu_chan.skippedcycles=Skipped Cycles
-envoy.cond_flags.pcu_chan.vreferror=Voltage Ref Error"
-
-envoy.cond_flags.pcu_ctrl.alertactive=Alert Active
-envoy.cond_flags.pcu_ctrl.altpwrgenmode=Alternate Power Generation Mode
-envoy.cond_flags.pcu_ctrl.altvfsettings=Alternate Voltage and Frequency Settings
-envoy.cond_flags.pcu_ctrl.badflashimage=Bad Flash Image
-envoy.cond_flags.pcu_ctrl.bricked=No Grid Profile
-envoy.cond_flags.pcu_ctrl.commandedreset=Commanded Reset
-envoy.cond_flags.pcu_ctrl.criticaltemperature=Critical Temperature
-envoy.cond_flags.pcu_ctrl.dc-pwr-low=DC Power Too Low
-envoy.cond_flags.pcu_ctrl.iuplinkproblem=IUP Link Problem
-envoy.cond_flags.pcu_ctrl.manutestmode=In Manu Test Mode
-envoy.cond_flags.pcu_ctrl.nsync=Grid Perturbation Unsynchronized
-envoy.cond_flags.pcu_ctrl.overtemperature=Over Temperature
-envoy.cond_flags.pcu_ctrl.poweronreset=Power On Reset
-envoy.cond_flags.pcu_ctrl.pwrgenoffbycmd=Power generation off by command
-envoy.cond_flags.pcu_ctrl.runningonac=Running on AC
-envoy.cond_flags.pcu_ctrl.tpmtest=Transient Grid Profile
-envoy.cond_flags.pcu_ctrl.unexpectedreset=Unexpected Reset
-envoy.cond_flags.pcu_ctrl.watchdogreset=Watchdog Reset
-
-envoy.cond_flags.rgm_chan.check_meter=Meter Error
-envoy.cond_flags.rgm_chan.power_quality=Poor Power Quality
--- /dev/null
+# binding
+binding.lghombot.name = LG HomBot Binding
+binding.lghombot.description = The LG HomBot binding allows control and supervision of your HomBot.
+
+# thing types
+thing-type.lghombot.LGHomBot.label = LG HomBot
+thing-type.lghombot.LGHomBot.description = HomBot vacuum robot
+
+# thing type configuration
+thing-type.config.lghombot.LGHomBot.ipAddress.label = Network Address
+thing-type.config.lghombot.LGHomBot.ipAddress.description = The IP or host name of the HomBot.
+thing-type.config.lghombot.LGHomBot.port.label = Port
+thing-type.config.lghombot.LGHomBot.port.description = Port of the HomBot to control.
+thing-type.config.lghombot.LGHomBot.pollingPeriod.label = Polling Period
+thing-type.config.lghombot.LGHomBot.pollingPeriod.description = Time between polls in seconds.
+
+# channel types
+channel-type.lghombot.stateType.label = State
+channel-type.lghombot.stateType.description = Current state.
+channel-type.lghombot.stateType.state.option.UNKNOWN = Unknown
+channel-type.lghombot.stateType.state.option.WORKING = Cleaning
+channel-type.lghombot.stateType.state.option.BACKMOVING = Backmoving
+channel-type.lghombot.stateType.state.option.BACKMOVING_INIT = Backmoving init
+channel-type.lghombot.stateType.state.option.BACKMOVING_JOY = Backmoving joy
+channel-type.lghombot.stateType.state.option.PAUSE = Paused
+channel-type.lghombot.stateType.state.option.STANDBY = Standby
+channel-type.lghombot.stateType.state.option.HOMING = Homing
+channel-type.lghombot.stateType.state.option.DOCKING = Docking
+channel-type.lghombot.stateType.state.option.CHARGING = Charging
+channel-type.lghombot.stateType.state.option.DIAGNOSIS = Running diagnosis
+channel-type.lghombot.stateType.state.option.RESERVATION = Changing settings
+channel-type.lghombot.stateType.state.option.ERROR = Error
+
+channel-type.lghombot.batteryType.label = Battery
+channel-type.lghombot.batteryType.description = Current battery charge
+
+channel-type.lghombot.cpuLoadType.label = CPU Load
+channel-type.lghombot.cpuLoadType.description = Current CPU load
+channel-type.lghombot.srvMemType.label = Used Memory
+channel-type.lghombot.srvMemType.description = Memory used by webserver on HomBot.
+channel-type.lghombot.cleanType.label = Clean
+channel-type.lghombot.cleanType.description = Start cleaning / return home.
+channel-type.lghombot.startType.label = Start
+channel-type.lghombot.startType.description = Start cleaning.
+channel-type.lghombot.homeType.label = Home
+channel-type.lghombot.homeType.description = Return home.
+channel-type.lghombot.stopType.label = Pause
+channel-type.lghombot.stopType.description = Pause the HomBot.
+channel-type.lghombot.turboType.label = Turbo
+channel-type.lghombot.turboType.description = Turbo mode ON, OFF.
+channel-type.lghombot.repeatType.label = Repeat
+channel-type.lghombot.repeatType.description = Repeat cleaning ON, OFF.
+
+channel-type.lghombot.modeType.label = Mode
+channel-type.lghombot.modeType.description = Cleaning mode.
+channel-type.lghombot.modeType.state.option.ZZ = Zigzag mode
+channel-type.lghombot.modeType.state.option.SB = Cell by cell mode
+channel-type.lghombot.modeType.state.option.SPOT = Spiral spot mode
+channel-type.lghombot.modeType.state.option.MACRO_SECTOR = My space mode
+
+channel-type.lghombot.nicknameType.label = Nickname
+channel-type.lghombot.nicknameType.description = Nickname of the HomBot.
+channel-type.lghombot.moveType.label = Move
+channel-type.lghombot.moveType.description = Move direction.
+channel-type.lghombot.cameraType.label = Camera
+channel-type.lghombot.cameraType.description = Image feed from the top camera.
+channel-type.lghombot.lastCleanType.label = Last Clean
+channel-type.lghombot.lastCleanType.description = Last time the HomBot cleaned.
+channel-type.lghombot.mapType.label = Map
+channel-type.lghombot.mapType.description = Map of last cleaned area.
+
+channel-type.lghombot.mondayType.label = Monday
+channel-type.lghombot.mondayType.description = Scheduled start time on Monday.
+channel-type.lghombot.tuesdayType.label = Tuesday
+channel-type.lghombot.tuesdayType.description = Scheduled start time on Tuesday.
+channel-type.lghombot.wednesdayType.label = Wednesday
+channel-type.lghombot.wednesdayType.description = Scheduled start time on Wednesday.
+channel-type.lghombot.thursdayType.label = Thursday
+channel-type.lghombot.thursdayType.description = Scheduled start time on Thursday.
+channel-type.lghombot.fridayType.label = Friday
+channel-type.lghombot.fridayType.description = Scheduled start time on Friday.
+channel-type.lghombot.saturdayType.label = Saturday
+channel-type.lghombot.saturdayType.description = Scheduled start time on Saturday.
+channel-type.lghombot.sundayType.label = Sunday
+channel-type.lghombot.sundayType.description = Scheduled start time on Sunday.
+++ /dev/null
-# binding
-binding.lghombot.name = LG HomBot Binding
-binding.lghombot.description = The LG HomBot binding allows control and supervision of your HomBot.
-
-# thing types
-thing-type.lghombot.LGHomBot.label = LG HomBot
-thing-type.lghombot.LGHomBot.description = HomBot vacuum robot
-
-# thing type configuration
-thing-type.config.lghombot.LGHomBot.ipAddress.label = Network Address
-thing-type.config.lghombot.LGHomBot.ipAddress.description = The IP or host name of the HomBot.
-thing-type.config.lghombot.LGHomBot.port.label = Port
-thing-type.config.lghombot.LGHomBot.port.description = Port of the HomBot to control.
-thing-type.config.lghombot.LGHomBot.pollingPeriod.label = Polling Period
-thing-type.config.lghombot.LGHomBot.pollingPeriod.description = Time between polls in seconds.
-
-# channel types
-channel-type.lghombot.stateType.label = State
-channel-type.lghombot.stateType.description = Current state.
-channel-type.lghombot.stateType.state.option.UNKNOWN = Unknown
-channel-type.lghombot.stateType.state.option.WORKING = Cleaning
-channel-type.lghombot.stateType.state.option.BACKMOVING = Backmoving
-channel-type.lghombot.stateType.state.option.BACKMOVING_INIT = Backmoving init
-channel-type.lghombot.stateType.state.option.BACKMOVING_JOY = Backmoving joy
-channel-type.lghombot.stateType.state.option.PAUSE = Paused
-channel-type.lghombot.stateType.state.option.STANDBY = Standby
-channel-type.lghombot.stateType.state.option.HOMING = Homing
-channel-type.lghombot.stateType.state.option.DOCKING = Docking
-channel-type.lghombot.stateType.state.option.CHARGING = Charging
-channel-type.lghombot.stateType.state.option.DIAGNOSIS = Running diagnosis
-channel-type.lghombot.stateType.state.option.RESERVATION = Changing settings
-channel-type.lghombot.stateType.state.option.ERROR = Error
-
-channel-type.lghombot.batteryType.label = Battery
-channel-type.lghombot.batteryType.description = Current battery charge
-
-channel-type.lghombot.cpuLoadType.label = CPU Load
-channel-type.lghombot.cpuLoadType.description = Current CPU load
-channel-type.lghombot.srvMemType.label = Used Memory
-channel-type.lghombot.srvMemType.description = Memory used by webserver on HomBot.
-channel-type.lghombot.cleanType.label = Clean
-channel-type.lghombot.cleanType.description = Start cleaning / return home.
-channel-type.lghombot.startType.label = Start
-channel-type.lghombot.startType.description = Start cleaning.
-channel-type.lghombot.homeType.label = Home
-channel-type.lghombot.homeType.description = Return home.
-channel-type.lghombot.stopType.label = Pause
-channel-type.lghombot.stopType.description = Pause the HomBot.
-channel-type.lghombot.turboType.label = Turbo
-channel-type.lghombot.turboType.description = Turbo mode ON, OFF.
-channel-type.lghombot.repeatType.label = Repeat
-channel-type.lghombot.repeatType.description = Repeat cleaning ON, OFF.
-
-channel-type.lghombot.modeType.label = Mode
-channel-type.lghombot.modeType.description = Cleaning mode.
-channel-type.lghombot.modeType.state.option.ZZ = Zigzag mode
-channel-type.lghombot.modeType.state.option.SB = Cell by cell mode
-channel-type.lghombot.modeType.state.option.SPOT = Spiral spot mode
-channel-type.lghombot.modeType.state.option.MACRO_SECTOR = My space mode
-
-channel-type.lghombot.nicknameType.label = Nickname
-channel-type.lghombot.nicknameType.description = Nickname of the HomBot.
-channel-type.lghombot.moveType.label = Move
-channel-type.lghombot.moveType.description = Move direction.
-channel-type.lghombot.cameraType.label = Camera
-channel-type.lghombot.cameraType.description = Image feed from the top camera.
-channel-type.lghombot.lastCleanType.label = Last Clean
-channel-type.lghombot.lastCleanType.description = Last time the HomBot cleaned.
-channel-type.lghombot.mapType.label = Map
-channel-type.lghombot.mapType.description = Map of last cleaned area.
-
-channel-type.lghombot.mondayType.label = Monday
-channel-type.lghombot.mondayType.description = Scheduled start time on Monday.
-channel-type.lghombot.tuesdayType.label = Tuesday
-channel-type.lghombot.tuesdayType.description = Scheduled start time on Tuesday.
-channel-type.lghombot.wednesdayType.label = Wednesday
-channel-type.lghombot.wednesdayType.description = Scheduled start time on Wednesday.
-channel-type.lghombot.thursdayType.label = Thursday
-channel-type.lghombot.thursdayType.description = Scheduled start time on Thursday.
-channel-type.lghombot.fridayType.label = Friday
-channel-type.lghombot.fridayType.description = Scheduled start time on Friday.
-channel-type.lghombot.saturdayType.label = Saturday
-channel-type.lghombot.saturdayType.description = Scheduled start time on Saturday.
-channel-type.lghombot.sundayType.label = Sunday
-channel-type.lghombot.sundayType.description = Scheduled start time on Sunday.
--- /dev/null
+offline.notextualconfig=The system connection with the name {0} doesn't exist anymore.
+offline.dyninsteadoftextual=A binding owned connection was found instead of a system connection for the broker name: {0}.
+offline.textualinsteadofdny=A system connection was found instead of a dynamic connection for the broker name: {0}.
+offline.sharedremoved=Another binding unexpectedly removed the internal broker connection.
+
+actionLabel=publish an MQTT message
+actionDesc=Publishes a value to the given MQTT topic.
+
+actionInputTopicLabel=MQTT Topic
+actionInputTopicDesc=The topic to publish a value to.
+actionInputValueLabel=Value
+actionInputValueDesc=The value to publish
+actionInputRetainLabel=Retain
+actionInputRetainDesc=Retain message
+++ /dev/null
-offline.notextualconfig=The system connection with the name {0} doesn't exist anymore.
-offline.dyninsteadoftextual=A binding owned connection was found instead of a system connection for the broker name: {0}.
-offline.textualinsteadofdny=A system connection was found instead of a dynamic connection for the broker name: {0}.
-offline.sharedremoved=Another binding unexpectedly removed the internal broker connection.
-
-actionLabel=publish an MQTT message
-actionDesc=Publishes a value to the given MQTT topic.
-
-actionInputTopicLabel=MQTT Topic
-actionInputTopicDesc=The topic to publish a value to.
-actionInputValueLabel=Value
-actionInputValueDesc=The value to publish
-actionInputRetainLabel=Retain
-actionInputRetainDesc=Retain message
--- /dev/null
+
+# binding
+binding.playstation.name = Sony PlayStation Binding
+binding.playstation.description = Monitor and control your Sony PlayStation.
+
+# thing types
+thing-type.playstation.PS3.label = PlayStation 3
+thing-type.playstation.PS3.description = Sony PlayStation 3 console.
+thing-type.playstation.PS4.label = PlayStation 4
+thing-type.playstation.PS4.description = Sony PlayStation 4 console.
+
+# thing type configuration
+thing-type.config.playstation.PS3.ipAddress.label = IP Address
+thing-type.config.playstation.PS3.ipAddress.description = The IP Address of the PlayStation 3.
+thing-type.config.playstation.PS4.userCredential.label = User Credential
+thing-type.config.playstation.PS4.userCredential.description = User Credential to Communicate with the PlayStation 4, 64 Hex Characters.
+thing-type.config.playstation.PS4.passCode.label = Pass Code
+thing-type.config.playstation.PS4.passCode.description = Pass Code to Log in to PlayStation 4, Optional, 4 Digits.
+thing-type.config.playstation.PS4.pairingCode.label = Pairing Code
+thing-type.config.playstation.PS4.pairingCode.description = Pairing Code to Pair openHAB Device to PlayStation 4, only Needed During Pairing, 8 Digits.
+thing-type.config.playstation.PS4.connectionTimeout.label = Connection Timeout
+thing-type.config.playstation.PS4.connectionTimeout.description = How Many Seconds After the Last Command the Connection to the PS4 Closes Down. Use 0 to Never Close Connection.
+thing-type.config.playstation.PS4.autoConnect.label = Auto Connect
+thing-type.config.playstation.PS4.autoConnect.description = Should the Binding Try to Connect to the PS4 as Soon as it's Turned On.
+thing-type.config.playstation.PS4.artworkSize.label = Artwork Size
+thing-type.config.playstation.PS4.artworkSize.description = The Width and Height of the Downloaded Artwork.
+thing-type.config.playstation.PS4.outboundIP.label = Outbound IP
+thing-type.config.playstation.PS4.outboundIP.description = IP Address of the Network Interface to use. Only use if your PS4 is on a Sub-Net Different from the Standard openHAB.
+thing-type.config.playstation.PS4.ipAddress.label = IP Address
+thing-type.config.playstation.PS4.ipAddress.description = The IP Address of the PlayStation 4.
+thing-type.config.playstation.PS4.ipPort.label = IP Port
+thing-type.config.playstation.PS4.ipPort.description = The IP Port Used to Communicate with the PlayStation 4.
+
+# channel types
+channel-type.playstation.power-ps3-channel.label = PlayStation 3 Power
+channel-type.playstation.power-ps3-channel.description = Shows if PlayStation 3 is On or Off.
+channel-type.playstation.power-channel.label = PlayStation 4 Power
+channel-type.playstation.power-channel.description = Shows if PlayStation 4 is On or in Standby/Off.
+channel-type.playstation.application-channel.label = Application
+channel-type.playstation.application-channel.description = Name of the Currently Running Application.
+channel-type.playstation.applicationId-channel.label = Application ID
+channel-type.playstation.applicationId-channel.description = ID of the Currently Running Application.
+channel-type.playstation.applicationImage-channel.label = Artwork
+channel-type.playstation.applicationImage-channel.description = Application Artwork.
+channel-type.playstation.oskText-channel.label = OSK Text
+channel-type.playstation.oskText-channel.description = The Text from the OnScreenKeyboard.
+channel-type.playstation.sendKey-channel.label = Send a Key Press
+channel-type.playstation.sendKey-channel.description = Send a Key Press to the PS4 UI.
+channel-type.playstation.secondScreen-channel.label = Second screen
+channel-type.playstation.secondScreen-channel.description = Link to 2ndScreen HTTP server.
+channel-type.playstation.connect-channel.label = Connect
+channel-type.playstation.connect-channel.description = Connect/Disconnect to/from PS4 Without Sending a Command.
+++ /dev/null
-
-# binding
-binding.playstation.name = Sony PlayStation Binding
-binding.playstation.description = Monitor and control your Sony PlayStation.
-
-# thing types
-thing-type.playstation.PS3.label = PlayStation 3
-thing-type.playstation.PS3.description = Sony PlayStation 3 console.
-thing-type.playstation.PS4.label = PlayStation 4
-thing-type.playstation.PS4.description = Sony PlayStation 4 console.
-
-# thing type configuration
-thing-type.config.playstation.PS3.ipAddress.label = IP Address
-thing-type.config.playstation.PS3.ipAddress.description = The IP Address of the PlayStation 3.
-thing-type.config.playstation.PS4.userCredential.label = User Credential
-thing-type.config.playstation.PS4.userCredential.description = User Credential to Communicate with the PlayStation 4, 64 Hex Characters.
-thing-type.config.playstation.PS4.passCode.label = Pass Code
-thing-type.config.playstation.PS4.passCode.description = Pass Code to Log in to PlayStation 4, Optional, 4 Digits.
-thing-type.config.playstation.PS4.pairingCode.label = Pairing Code
-thing-type.config.playstation.PS4.pairingCode.description = Pairing Code to Pair openHAB Device to PlayStation 4, only Needed During Pairing, 8 Digits.
-thing-type.config.playstation.PS4.connectionTimeout.label = Connection Timeout
-thing-type.config.playstation.PS4.connectionTimeout.description = How Many Seconds After the Last Command the Connection to the PS4 Closes Down. Use 0 to Never Close Connection.
-thing-type.config.playstation.PS4.autoConnect.label = Auto Connect
-thing-type.config.playstation.PS4.autoConnect.description = Should the Binding Try to Connect to the PS4 as Soon as it's Turned On.
-thing-type.config.playstation.PS4.artworkSize.label = Artwork Size
-thing-type.config.playstation.PS4.artworkSize.description = The Width and Height of the Downloaded Artwork.
-thing-type.config.playstation.PS4.outboundIP.label = Outbound IP
-thing-type.config.playstation.PS4.outboundIP.description = IP Address of the Network Interface to use. Only use if your PS4 is on a Sub-Net Different from the Standard openHAB.
-thing-type.config.playstation.PS4.ipAddress.label = IP Address
-thing-type.config.playstation.PS4.ipAddress.description = The IP Address of the PlayStation 4.
-thing-type.config.playstation.PS4.ipPort.label = IP Port
-thing-type.config.playstation.PS4.ipPort.description = The IP Port Used to Communicate with the PlayStation 4.
-
-# channel types
-channel-type.playstation.power-ps3-channel.label = PlayStation 3 Power
-channel-type.playstation.power-ps3-channel.description = Shows if PlayStation 3 is On or Off.
-channel-type.playstation.power-channel.label = PlayStation 4 Power
-channel-type.playstation.power-channel.description = Shows if PlayStation 4 is On or in Standby/Off.
-channel-type.playstation.application-channel.label = Application
-channel-type.playstation.application-channel.description = Name of the Currently Running Application.
-channel-type.playstation.applicationId-channel.label = Application ID
-channel-type.playstation.applicationId-channel.description = ID of the Currently Running Application.
-channel-type.playstation.applicationImage-channel.label = Artwork
-channel-type.playstation.applicationImage-channel.description = Application Artwork.
-channel-type.playstation.oskText-channel.label = OSK Text
-channel-type.playstation.oskText-channel.description = The Text from the OnScreenKeyboard.
-channel-type.playstation.sendKey-channel.label = Send a Key Press
-channel-type.playstation.sendKey-channel.description = Send a Key Press to the PS4 UI.
-channel-type.playstation.secondScreen-channel.label = Second screen
-channel-type.playstation.secondScreen-channel.description = Link to 2ndScreen HTTP server.
-channel-type.playstation.connect-channel.label = Connect
-channel-type.playstation.connect-channel.description = Connect/Disconnect to/from PS4 Without Sending a Command.
--- /dev/null
+# binding
+binding.pushbullet.name = Pushbullet Binding
+binding.pushbullet.description = The Pushbullet binding allows you to send messages to other users of the Pushbullet service.
+
+# action
+actionSendPushbulletNoteLabel = publish a Pushbullet message
+actionSendPushbulletNoteDesc = Publishes a Title to the given Pushbullet Recipient.
+
+actionSendPushbulletNoteInputRecipientLabel = Pushbullet Recipient
+actionSendPushbulletNoteInputRecipientDesc = The Recipient to publish a Title to.
+actionSendPushbulletNoteInputTitleLabel = Title
+actionSendPushbulletNoteInputTitleDesc = The Title to publish
+actionSendPushbulletNoteInputMessageLabel = Message
+actionSendPushbulletNoteInputMessageDesc = The Message to publish
+
+# error texts
+offline.conf-error-httpresponseexception = The pushbullet server reported an error, possibly an expired token. Check on web site
+++ /dev/null
-# binding
-binding.pushbullet.name = Pushbullet Binding
-binding.pushbullet.description = The Pushbullet binding allows you to send messages to other users of the Pushbullet service.
-
-# action
-actionSendPushbulletNoteLabel = publish a Pushbullet message
-actionSendPushbulletNoteDesc = Publishes a Title to the given Pushbullet Recipient.
-
-actionSendPushbulletNoteInputRecipientLabel = Pushbullet Recipient
-actionSendPushbulletNoteInputRecipientDesc = The Recipient to publish a Title to.
-actionSendPushbulletNoteInputTitleLabel = Title
-actionSendPushbulletNoteInputTitleDesc = The Title to publish
-actionSendPushbulletNoteInputMessageLabel = Message
-actionSendPushbulletNoteInputMessageDesc = The Message to publish
-
-# error texts
-offline.conf-error-httpresponseexception = The pushbullet server reported an error, possibly an expired token. Check on web site
--- /dev/null
+actions.play.label=Play
+actions.play.description=Play the given Spotify uri
+actions.play.context_uri.label=Context URI
+actions.play.context_uri.description=The context uri or a comma separated list of uris
+actions.play.device_id.label=Device Id
+actions.play.device_id.description=Id of the device to play. If omitted will play on the current active device (Optional)
+actions.play.offset.label=offset
+actions.play.offset.description=Offset to start (Optional).
+actions.play.positions_ms.label=Position ms
+actions.play.positions_ms.description=Position in milliseconds to start (Optional)
+++ /dev/null
-actions.play.label=Play
-actions.play.description=Play the given Spotify uri
-actions.play.context_uri.label=Context URI
-actions.play.context_uri.description=The context uri or a comma separated list of uris
-actions.play.device_id.label=Device Id
-actions.play.device_id.description=Id of the device to play. If omitted will play on the current active device (Optional)
-actions.play.offset.label=offset
-actions.play.offset.description=Offset to start (Optional).
-actions.play.positions_ms.label=Position ms
-actions.play.positions_ms.description=Position in milliseconds to start (Optional)
--- /dev/null
+# binding
+bindingDescription = This is the binding for Somfy Universal RTS Interface II (URTSI II).
+
+# thing types
+urtsiDeviceLabel = Somfy URTSI II Device
+urtsiDeviceDescription = This is the Somfy URTSI II box.
+urtsiDevicePortLabel = Port
+urtsiDevicePortDescription = The port which is used to access the device (e.g. /dev/ttyUSB0)
+urtsiDeviceCommandIntervalLabel = Command execution interval
+urtsiDeviceCommandIntervalDescription = The time (in ms) the binding should wait between sending commands to the device
+
+rtsDeviceLabel = Somfy RTS Device
+rtsDeviceDescription = This is the RTS device (e.g. a rollershutter).
+rtsDeviceChannelLabel = Channel
+rtsDeviceChannelDescription = The URTSI II channel the RTS device is assigned to at URTSI II.
+
+positionChannelLabel = RTS Device position
+positionChannelDescription = Change the position of your device
+++ /dev/null
-# binding
-bindingDescription = This is the binding for Somfy Universal RTS Interface II (URTSI II).
-
-# thing types
-urtsiDeviceLabel = Somfy URTSI II Device
-urtsiDeviceDescription = This is the Somfy URTSI II box.
-urtsiDevicePortLabel = Port
-urtsiDevicePortDescription = The port which is used to access the device (e.g. /dev/ttyUSB0)
-urtsiDeviceCommandIntervalLabel = Command execution interval
-urtsiDeviceCommandIntervalDescription = The time (in ms) the binding should wait between sending commands to the device
-
-rtsDeviceLabel = Somfy RTS Device
-rtsDeviceDescription = This is the RTS device (e.g. a rollershutter).
-rtsDeviceChannelLabel = Channel
-rtsDeviceChannelDescription = The URTSI II channel the RTS device is assigned to at URTSI II.
-
-positionChannelLabel = RTS Device position
-positionChannelDescription = Change the position of your device
projects / openhab-addons.git / commitdiff