[max] Added default translation properties file (#11626)

Signed-off-by: Marcel Verpaalen <marcel@verpaalen.com>

diff --git a/bundles/org.openhab.binding.max/src/main/resources/OH-INF/i18n/max.properties b/bundles/org.openhab.binding.max/src/main/resources/OH-INF/i18n/max.properties
new file mode 100644 (file)
index 0000000..4c1f02f
--- /dev/null
+++ b/bundles/org.openhab.binding.max/src/main/resources/OH-INF/i18n/max.properties
@@ -0,0 +1,199 @@
+# binding
+
+binding.max.name = MAX! Binding
+binding.max.description = This is the binding for the eQ-3 MAX! Home Solution.
+
+# thing types
+
+thing-type.max.bridge.label = MAX! Cube LAN Gateway
+thing-type.max.bridge.description = This bridge represents the MAX! Cube LAN Gateway.
+thing-type.max.ecoswitch.label = MAX! Ecoswitch
+thing-type.max.ecoswitch.description = This is a MAX! EcoSwitch
+thing-type.max.shuttercontact.label = MAX! Shutter Contact
+thing-type.max.shuttercontact.description = This is a MAX! Shutter Contact
+thing-type.max.thermostat.label = MAX! HeatingThermostat
+thing-type.max.thermostat.description = This is a MAX! HeatingThermostat
+thing-type.max.thermostatplus.label = MAX! HeatingThermostat+
+thing-type.max.thermostatplus.description = This is a MAX! HeatingThermostat+
+thing-type.max.wallthermostat.label = MAX! WallThermostat+
+thing-type.max.wallthermostat.description = This is a MAX! WallThermostat+
+
+# thing types config
+
+thing-type.config.max.bridge.action-cubeReboot.label = Restart Cube
+thing-type.config.max.bridge.action-cubeReboot.description = Restarts the Cube.
+thing-type.config.max.bridge.action-cubeReboot.option.1234 = Reboot
+thing-type.config.max.bridge.action-cubeReboot.option.-1 = No Action
+thing-type.config.max.bridge.action-cubeReset.label = Reset Cube Configuration
+thing-type.config.max.bridge.action-cubeReset.description = Resets the MAX! Cube room and device information. Devices will need to be included again!
+thing-type.config.max.bridge.action-cubeReset.option.1234 = Reset
+thing-type.config.max.bridge.action-cubeReset.option.-1 = No Action
+thing-type.config.max.bridge.exclusive.label = Exclusive Mode
+thing-type.config.max.bridge.exclusive.description = If set to true, the binding will leave the connection to the Cube open.
+thing-type.config.max.bridge.group.actions.label = Actions
+thing-type.config.max.bridge.group.actions.description = Action Buttons
+thing-type.config.max.bridge.group.device.label = Device Settings
+thing-type.config.max.bridge.group.device.description = Device parameter settings
+thing-type.config.max.bridge.group.identification.label = Identification
+thing-type.config.max.bridge.group.identification.description = Hardware & location identification
+thing-type.config.max.bridge.group.network.label = Connection
+thing-type.config.max.bridge.group.network.description = Connection Settings
+thing-type.config.max.bridge.ipAddress.label = MAX! Cube LAN Gateway IP
+thing-type.config.max.bridge.ipAddress.description = The IP address of the MAX! Cube LAN gateway
+thing-type.config.max.bridge.maxRequestsPerConnection.label = Max Requests Per Connection
+thing-type.config.max.bridge.maxRequestsPerConnection.description = In exclusive mode, how many requests are allowed until connection is closed and reopened.
+thing-type.config.max.bridge.ntpServer1.label = NTP Server 1
+thing-type.config.max.bridge.ntpServer1.description = The hostname for NTP Server 1 used by the Cube to get the time.
+thing-type.config.max.bridge.ntpServer2.label = NTP Server 2
+thing-type.config.max.bridge.ntpServer2.description = The hostname for NTP Server 2 used by the Cube to get the time.
+thing-type.config.max.bridge.port.label = MAX! Cube LAN Gateway Port
+thing-type.config.max.bridge.port.description = Port of the LAN gateway
+thing-type.config.max.bridge.refreshInterval.label = Refresh Interval
+thing-type.config.max.bridge.refreshInterval.description = The refresh interval in seconds which is used to poll given MAX! Cube.
+thing-type.config.max.bridge.rfAddress.label = RF Address
+thing-type.config.max.bridge.rfAddress.description = The RF Address used for communication between the devices.
+thing-type.config.max.bridge.serialNumber.label = Serial Number
+thing-type.config.max.bridge.serialNumber.description = The Serial Number identifies one specific device.
+thing-type.config.max.ecoswitch.group.device.label = Device Settings
+thing-type.config.max.ecoswitch.group.device.description = Device parameter settings
+thing-type.config.max.ecoswitch.group.identification.label = Identification
+thing-type.config.max.ecoswitch.group.identification.description = Hardware & location identification
+thing-type.config.max.ecoswitch.name.label = Device Name
+thing-type.config.max.ecoswitch.name.description = The device description.
+thing-type.config.max.ecoswitch.rfAddress.label = RF Address
+thing-type.config.max.ecoswitch.rfAddress.description = The RF Address used for communication between the devices.
+thing-type.config.max.ecoswitch.room.label = Room
+thing-type.config.max.ecoswitch.room.description = The room name.
+thing-type.config.max.ecoswitch.serialNumber.label = Serial Number
+thing-type.config.max.ecoswitch.serialNumber.description = The Serial Number identifies one specific device.
+thing-type.config.max.shuttercontact.action-deviceDelete.label = Delete Device from Cube
+thing-type.config.max.shuttercontact.action-deviceDelete.description = Deletes the device from the MAX! Cube. Device will need to be included again!
+thing-type.config.max.shuttercontact.action-deviceDelete.option.1234 = Delete
+thing-type.config.max.shuttercontact.action-deviceDelete.option.-1 = No Action
+thing-type.config.max.shuttercontact.group.actions.label = Actions
+thing-type.config.max.shuttercontact.group.actions.description = Action Buttons
+thing-type.config.max.shuttercontact.group.device.label = Device Settings
+thing-type.config.max.shuttercontact.group.device.description = Device parameter settings
+thing-type.config.max.shuttercontact.group.identification.label = Identification
+thing-type.config.max.shuttercontact.group.identification.description = Hardware & location identification
+thing-type.config.max.shuttercontact.name.label = Device Name
+thing-type.config.max.shuttercontact.name.description = The device description.
+thing-type.config.max.shuttercontact.rfAddress.label = RF Address
+thing-type.config.max.shuttercontact.rfAddress.description = The RF Address used for communication between the devices.
+thing-type.config.max.shuttercontact.room.label = Room
+thing-type.config.max.shuttercontact.room.description = The room name.
+thing-type.config.max.shuttercontact.serialNumber.label = Serial Number
+thing-type.config.max.shuttercontact.serialNumber.description = The Serial Number identifies one specific device.
+thing-type.config.max.thermostat.action-deviceDelete.label = Delete Device from Cube
+thing-type.config.max.thermostat.action-deviceDelete.description = Deletes the device from the MAX! Cube. Device will need to be included again!
+thing-type.config.max.thermostat.action-deviceDelete.option.1234 = Delete
+thing-type.config.max.thermostat.action-deviceDelete.option.-1 = No Action
+thing-type.config.max.thermostat.comfortTemp.label = Comfort Temperature
+thing-type.config.max.thermostat.comfortTemp.description = Set the Comfort Temperature.
+thing-type.config.max.thermostat.ecoTemp.label = Eco Temperature
+thing-type.config.max.thermostat.ecoTemp.description = Set the Eco Temperature.
+thing-type.config.max.thermostat.group.actions.label = Actions
+thing-type.config.max.thermostat.group.actions.description = Action Buttons
+thing-type.config.max.thermostat.group.binding.label = Binding Settings
+thing-type.config.max.thermostat.group.binding.description = Binding settings for this device
+thing-type.config.max.thermostat.group.device.label = Device Settings
+thing-type.config.max.thermostat.group.device.description = Device parameter settings
+thing-type.config.max.thermostat.group.identification.label = Identification
+thing-type.config.max.thermostat.group.identification.description = Hardware & location identification
+thing-type.config.max.thermostat.maxTempSetpoint.label = Max Temperature
+thing-type.config.max.thermostat.maxTempSetpoint.description = Set the Thermostat maximum temperature.
+thing-type.config.max.thermostat.minTempSetpoint.label = Min Temperature
+thing-type.config.max.thermostat.minTempSetpoint.description = Set the Thermostat minimum temperature.
+thing-type.config.max.thermostat.name.label = Device Name
+thing-type.config.max.thermostat.name.description = The device description.
+thing-type.config.max.thermostat.offsetTemp.label = OffSet Temperature
+thing-type.config.max.thermostat.offsetTemp.description = Set the Thermostat offset.
+thing-type.config.max.thermostat.refreshActualRate.label = Actual Temperature Refresh Rate
+thing-type.config.max.thermostat.refreshActualRate.description = Experimental feature! Rate of the actual refresh in minutes. 0-9=refresh disabled. Minimum refresh rate once/10 minutes, recommended 60min. The settings of the heating thermostats are changed to trigger an update of temperature, as the actual temperature only is updated when the valves changes.
+thing-type.config.max.thermostat.rfAddress.label = RF Address
+thing-type.config.max.thermostat.rfAddress.description = The RF Address used for communication between the devices.
+thing-type.config.max.thermostat.room.label = Room
+thing-type.config.max.thermostat.room.description = The room name.
+thing-type.config.max.thermostat.serialNumber.label = Serial Number
+thing-type.config.max.thermostat.serialNumber.description = The Serial Number identifies one specific device.
+thing-type.config.max.thermostat.windowOpenDuration.label = Window Open Duration
+thing-type.config.max.thermostat.windowOpenDuration.description = Set the Thermostat Window Open Duration.
+thing-type.config.max.thermostat.windowOpenTemp.label = Window Open Temp
+thing-type.config.max.thermostat.windowOpenTemp.description = Set the Window Open Temperature.
+thing-type.config.max.thermostatplus.action-deviceDelete.label = Delete Device from Cube
+thing-type.config.max.thermostatplus.action-deviceDelete.description = Deletes the device from the MAX! Cube. Device will need to be included again!
+thing-type.config.max.thermostatplus.action-deviceDelete.option.1234 = Delete
+thing-type.config.max.thermostatplus.action-deviceDelete.option.-1 = No Action
+thing-type.config.max.thermostatplus.comfortTemp.label = Comfort Temperature
+thing-type.config.max.thermostatplus.comfortTemp.description = Set the Comfort Temperature.
+thing-type.config.max.thermostatplus.ecoTemp.label = Eco Temperature
+thing-type.config.max.thermostatplus.ecoTemp.description = Set the Eco Temperature.
+thing-type.config.max.thermostatplus.group.actions.label = Actions
+thing-type.config.max.thermostatplus.group.actions.description = Action Buttons
+thing-type.config.max.thermostatplus.group.binding.label = Binding Settings
+thing-type.config.max.thermostatplus.group.binding.description = Binding settings for this device
+thing-type.config.max.thermostatplus.group.device.label = Device Settings
+thing-type.config.max.thermostatplus.group.device.description = Device parameter settings
+thing-type.config.max.thermostatplus.group.identification.label = Identification
+thing-type.config.max.thermostatplus.group.identification.description = Hardware & location identification
+thing-type.config.max.thermostatplus.maxTempSetpoint.label = Max Temperature
+thing-type.config.max.thermostatplus.maxTempSetpoint.description = Set the Thermostat maximum temperature.
+thing-type.config.max.thermostatplus.minTempSetpoint.label = Min Temperature
+thing-type.config.max.thermostatplus.minTempSetpoint.description = Set the Thermostat minimum temperature.
+thing-type.config.max.thermostatplus.name.label = Device Name
+thing-type.config.max.thermostatplus.name.description = The device description.
+thing-type.config.max.thermostatplus.offsetTemp.label = OffSet Temperature
+thing-type.config.max.thermostatplus.offsetTemp.description = Set the Thermostat offset.
+thing-type.config.max.thermostatplus.refreshActualRate.label = Actual Temperature Refresh Rate
+thing-type.config.max.thermostatplus.refreshActualRate.description = Experimental feature! Rate of the actual refresh in minutes. 0-9=refresh disabled. Minimum refresh rate once/10 minutes, recommended 60min. The settings of the heating thermostats are changed to trigger an update of temperature, as the actual temperature only is updated when the valves changes.
+thing-type.config.max.thermostatplus.rfAddress.label = RF Address
+thing-type.config.max.thermostatplus.rfAddress.description = The RF Address used for communication between the devices.
+thing-type.config.max.thermostatplus.room.label = Room
+thing-type.config.max.thermostatplus.room.description = The room name.
+thing-type.config.max.thermostatplus.serialNumber.label = Serial Number
+thing-type.config.max.thermostatplus.serialNumber.description = The Serial Number identifies one specific device.
+thing-type.config.max.thermostatplus.windowOpenDuration.label = Window Open Duration
+thing-type.config.max.thermostatplus.windowOpenDuration.description = Set the Thermostat Window Open Duration.
+thing-type.config.max.thermostatplus.windowOpenTemp.label = Window Open Temp
+thing-type.config.max.thermostatplus.windowOpenTemp.description = Set the Window Open Temperature.
+thing-type.config.max.wallthermostat.action-deviceDelete.label = Delete Device from Cube
+thing-type.config.max.wallthermostat.action-deviceDelete.description = Deletes the device from the MAX! Cube. Device will need to be included again!
+thing-type.config.max.wallthermostat.action-deviceDelete.option.1234 = Delete
+thing-type.config.max.wallthermostat.action-deviceDelete.option.-1 = No Action
+thing-type.config.max.wallthermostat.group.actions.label = Actions
+thing-type.config.max.wallthermostat.group.actions.description = Action Buttons
+thing-type.config.max.wallthermostat.group.device.label = Device Settings
+thing-type.config.max.wallthermostat.group.device.description = Device parameter settings
+thing-type.config.max.wallthermostat.group.identification.label = Identification
+thing-type.config.max.wallthermostat.group.identification.description = Hardware & location identification
+thing-type.config.max.wallthermostat.name.label = Device Name
+thing-type.config.max.wallthermostat.name.description = The device description.
+thing-type.config.max.wallthermostat.rfAddress.label = RF Address
+thing-type.config.max.wallthermostat.rfAddress.description = The RF Address used for communication between the devices.
+thing-type.config.max.wallthermostat.room.label = Room
+thing-type.config.max.wallthermostat.room.description = The room name.
+thing-type.config.max.wallthermostat.serialNumber.label = Serial Number
+thing-type.config.max.wallthermostat.serialNumber.description = The Serial Number identifies one specific device.
+
+# channel types
+
+channel-type.max.actual_temp.label = Current Temperature
+channel-type.max.actual_temp.description = Current measured room temperature
+channel-type.max.contact_state.label = Contact State
+channel-type.max.contact_state.description = Contact state information
+channel-type.max.duty_cycle.label = Duty Cycle
+channel-type.max.duty_cycle.description = Duty Cycle for sending commands to the devices
+channel-type.max.free_mem.label = Free Memory Slots
+channel-type.max.free_mem.description = Free memory slots to store commands send to the devices
+channel-type.max.locked.label = Thermostat Locked
+channel-type.max.locked.description = Thermostat is locked for adjustments
+channel-type.max.mode.label = Mode
+channel-type.max.mode.description = Thermostat Mode Setting
+channel-type.max.mode.state.option.AUTOMATIC = AUTOMATIC
+channel-type.max.mode.state.option.MANUAL = MANUAL
+channel-type.max.mode.state.option.BOOST = BOOST
+channel-type.max.mode.state.option.VACATION = VACATION
+channel-type.max.set_temp.label = Setpoint Temperature
+channel-type.max.set_temp.description = Thermostat Setpoint temperature
+channel-type.max.valve.label = Valve Position
+channel-type.max.valve.description = Thermostat Valve Position