[velux] Bridge status shows offline when communication fails (#13406)

* [velux] dynamically update bridge on-/off- line state

Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>

[pulseaudio] Apply real disconnection when needed (#13338)

* [pulseaudio] Removing isIdle test

The isIdle boolean was not properly handled.
When disconnection is called, isIdle is not relevant : we should always honnor the disconnection request.
In fact, isIdle prevented disconnection when it is necessary (example : when a IOException occurs when sending audio to sink)

+Little bug fix on volume parsing: some volume request doesn't respond with a space after the comma separating left/right channel.

* [pulseaudio] Enhancement to the idle detection for disconnection

Using a counter to count client instead of a isIdle variable, which was not thread safe.
The PulseaudioSimpleProtocolStream parent class is now the sole responsible for closing source or sink stream.

* [pulseaudio] Small performance enhancement

Avoid a costly synchronized operation for a method called very often.

Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>

[miele] Migrate start channel to full DateTime channel and add end channel (#13393)

* Migrate start/finish channels to full DateTime channels
* Unmark start and duration as advanced channels
* Add end channel

Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>

[touchwand] Fix thermostat target temperature command  (#13427)

* Fix target temperature command

1) Fix target temperature command
2) fixed typo in log

* Allow update status even if the unit is not alive

Seems 'acwand' status is always "DOWN" so ignore this and just log debug

Signed-off-by: Roie Geron <roie.geron@gmail.com>

How to support OpenWeatherMap one call api 3.0. (#13414)

Add OpenCall API version property.

Allowing for version 3.0 API to be set.

Signed-off-by: Ross Buggins <20972856+rossbuggins@users.noreply.github.com>

[fsinternetradio] Add Ruark R5 to tested devices & mode list (#13325)

* Add Ruark R5 to tested devices & mode list

Signed-off-by: Timo Grossenbacher <timo@timogrossenbacher.ch>

New translations bluetooth.properties (Dutch) (#13431)

[ecowatt] Unit tests for methods getting channel state from API response (#13419)

Signed-off-by: Laurent Garnier <lg.hc@free.fr>

[Tesla] Add event stream & handling post new authentication process by Tesla (#13116)

Signed-Off-By: Karel Goderis <karel.goderis@me.com>

Fix ClassCastException for LocalDateTime (#13425)

Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>

Update Shelly and Tradfri bindings for upgrade to Californium 2.7.3 (#13407)

* Update Shelly and Tradfri bindings for upgrade to Californium 2.7.3

* Fixes deprecated API usages
* Resolves itest runbundles

Signed-off-by: Wouter Born <github@maindrain.net>

[jrubyscripting] Update to JRuby 9.3.8.0 (#13424)

Signed-off-by: Jimmy Tanagra <jcode@tanagra.id.au>

[mqtt.homeassistant] support availability_templates (#13397)

Signed-off-by: Cody Cutrer <cody@cutrer.us>

New Crowdin updates (#13415)

* New translations ecowatt.properties (Italian)
* New translations jellyfin.properties (Italian)

[openhabcloud] improved logging for troubleshooting purposes (#12430)

* [openhabcloud] Sensor UUID and secret in logging

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhab] More logging. Lambda callbacks

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] Sensor short UUID/secret completely

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] pong milliseconds

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] Log websecket factory HTTP calls and PACKETs (on connect)

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] Sensor more secrets

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] abort connect on exceptional errors

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] remove dead code

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] Socket.IO http logging only with TRACE level enabled

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] logging level tuning

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] fix typo sensored->censored

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [openhabcloud] warn level logging (not info) when disconnected

Signed-off-by: Sami Salonen <ssalonen@gmail.com>
Signed-off-by: Sami Salonen <ssalonen@gmail.com>

[nuvo] Add NuvoNet source communication capabilities (#12042)

* Add NuvoNet source communication

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* fix readme

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* remove commented code

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Add startup/shutdown keypad messages

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Minor cleanup before code review

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Add configurable favorites labels

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* add new config item to i18n properties

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Fix restart detection and improve version matching

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* review changes

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Increment version number

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* remove repeated word in channels.xml

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
* Review changes

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>
Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>

readme typo: callbackIP needs to match to code (#13410)

Signed-off-by: Bernd Weymann <bernd.weymann@gmail.com>

[mqtt.homeassistant] More readable label for discovered things (#13402)

* [mqtt.openassistant] Better labels for discoverd things

This PR introduces more simple label for things, instead of
"My Sensor (Sensor, Sensor, Sensor, Sensor, Sensor, Switch)" we have
simply "Me Sensor (5x Sensor, Switch)".

Signed-off-by: Sami Salonen <ssalonen@gmail.com>

[mqtt.homeassistant] sensors with a state_class are numeric (#13398)

see reference in code comment, but a measurement sensor is assumed to
be numeric, even if it doesn't have a unit

Signed-off-by: Cody Cutrer <cody@cutrer.us>

[mqtt.homeassistant] Stable jsondb discovery result (#13401)

* [mqtt.homeassistant] Stable jsondb serialization for discovery results

Similar to openhab/openhab-core#2436, we want
to have consistent ordering of data in JSONDB. This is fixing the jsondb
order for mqtt.homeassistant discovery results, specifically, the
"topics" property.

* [mqtt.homeassistant] order using full topic string, not by subcomponent

Signed-off-by: Sami Salonen <ssalonen@gmail.com>

[ecowatt] Initial contribution (#13404)

* [ecowatt] Initial contribution

This binding uses the Ecowatt API to expose clear signals to adopt the right gestures and to ensure a good supply of electricity for all in France.

Close #13351

Signed-off-by: Laurent Garnier <lg.hc@free.fr>
* Update bundles/org.openhab.binding.ecowatt/src/main/resources/OH-INF/thing/thing-types.xml

Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Signed-off-by: Laurent Garnier <lg.hc@free.fr>
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Co-authored-by: Fabian Wolter <github@fabian-wolter.de>

[androiddebugbridge] fix get current package and get mac address (#13390)

Signed-off-by: Miguel Álvarez <miguelwork92@gmail.com>
Signed-off-by: Miguel Álvarez <miguelwork92@gmail.com>

[openwebnet] improved README for AUX and ENERGY (#13408)

Signed-off-by: Massimo Valla <mvcode00@gmail.com>
Signed-off-by: Massimo Valla <mvcode00@gmail.com>

[miio] Qingping Air Monitor (cgllc.airmonitor.s1) support is broken (#13262)

* [miio] Qingping Air Monitor (cgllc.airmonitor.s1) support is broken #13258
1.  Custom refresh command for "battery" was defined . The device with "4.1.8_9999" firmware version does not allowed to obtain this information by this way which prevents to obtain other values. The solution should work for both old firmware (the battery information would be requested as before) and it does not prevent the device with new firmware from sending other values (I checked it).

Signed-off-by: Dmitry Malenok <_mak_@bk.ru>
* [miio] Qingping Air Monitor (cgllc.airmonitor.s1) support is broken #13258
1.  The comment clarifying the "battery" parameter behavior was added.

Signed-off-by: Dmitry Malenok <_mak_@bk.ru>
Signed-off-by: Dmitry Malenok <_mak_@bk.ru>

[jellyfin] add play by id channels and update sdk (#13389)

* [jellyfin] add play by id channels and update sdk
* [jellyfin] add missed Playing Item Id channel

Signed-off-by: Miguel Álvarez <miguelwork92@gmail.com>

Adapt to core-changes (added JNA to tp) (#13298)

Signed-off-by: Jan N. Klug <github@klug.nrw>

[radiothermostat] Ignore updates if thermostat data is invalid (#13394)

* Ignore updates if data is invalid

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>

Configure zone on panel even if the channel is not yet linked (#13380)

Signed-off-by: Haavar Valeur <haavar@haavar.com>

[ipcamera] Fix ONVIF fails to reconnect (#13396)

* Fix reconnecting issues
* Cleanup logging.

Signed-off-by: Matthew Skinner <matt@pcmus.com>

[vosk] Upgrade sdk and handle UnsatisfiedLinkError exceptions (#13391)

* [vosk] update sdk
* [vosk] handle unsatisfied link error exceptions

Signed-off-by: Miguel Álvarez <miguelwork92@gmail.com>

[jsscripting] Update openhab-js to 2.0.3 (#13385)

* [jsscripting] Update openhab-js to 2.0.3
* [jsscripting] Update README

Signed-off-by: Florian Hotze <florianh_dev@icloud.com>

Consider TimeZoneProvider to build states for time-stamp channels (#13386)

Signed-off-by: Christoph Weitkamp <github@christophweitkamp.de>

fix README.md (#13387)

Signed-off-by: Alexander Friese <af944580@googlemail.com>

Fix date cast exception (#13382)

After upgrading mysql-connector to 8.0.30 this exception was thrown: class java.time.LocalDateTime cannot be cast to class java.sql.Timestamp

Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>

[fineoffsetweatherstation] Fix measurands (#13381)

* fix the PIEZO_GAIN10 measurand
* skip RAIN_PRIO measurand
* skip RCSATION measurand

Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>

[velux] Correction to channel label (#13379)

Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>
Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>

[velux] Vane position channel is visible when required (#13271)

* [velux] make vanePosition channel dynamic
* [velux] change category of window position from 'blinds' to 'window'

Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>

[systeminfo] Add CPU load channel, update dependencies (#13292)

* Add CPU load channel, update dependencies
* use PercentType, correct process CPU load
* Add and fix test

Signed-off-by: Mark Herwege <mark.herwege@telenet.be>

[rotel] New channel to select FM/DAB/iRadio preset (#13285)

* [rotel] New channel to select FM/DAB/iRadio preset

For models RCX-1500, RDG-1520, RT-11, RT-1570, T11 and T14

Signed-off-by: Laurent Garnier <lg.hc@free.fr>

New translations unifi.properties (Dutch) (#13372)

[linky] Docker specificities (#13348)

Related to #13336

Signed-off-by: Laurent Garnier <lg.hc@free.fr>

[unifi] Fix portoverride to not remove any other data (#13362)

When a user has configured additional settings on a PoE port, like name.
These settings where lost when changing the PoEPort status in openHAB.
This was because in the binding only some information of the override was stored and when writing the new state this information would have been sent too.
In this change the object to store the override has been replaced by a plain json object. Therefore we don't have to know what is in it and all information is kept.

Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>

[Easee] Initial contribution (#12954)

* initial binding version

Signed-off-by: Alexander Friese <af944580@gmail.com>

[hdpowerview] Correct shade capabilities information (#13330)

* [hdpowerview] corrections to capabilities database

Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>

[Konnected] Taking configured onValue into account when sending status to actuator (#13360)

* Taking configured onvalue into account when sending status to actuator
* Added documentation for onValue configuration

Signed-off-by: Haavar Valeur <haavar@haavar.com>

New translations shelly.properties (German) (#13366)

[upnpcontrol] Prepare dynamic channels and status messages for translation (#13364)

* prepare dynamic channels and status messages for translation

Signed-off-by: Mark Herwege <mark.herwege@telenet.be>

[jablotron] Added thermometers support for JA100F alarms (#13361)

Signed-off-by: Ondrej Pecta <opecta@gmail.com>

Fixed example thing. Made names less ambiguous (#13363)

Signed-off-by: Haavar Valeur <haavar@haavar.com>

[dsmr] Made additional key for smarty meter an option (#13359)

* [dsmr] Made additional key for smarty meter optional

Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>

[remoteopenhab] Fix the pattern to parse DateTime (#13349)

Re-use the same pattern as defined in class DateTimeTyoe.

Allows the support of 0 to 9 digits after the seconds.

Signed-off-by: Laurent Garnier <lg.hc@free.fr>

[Konnected] Using default onvalue if configured is null (#13354)

* Using default onvalue if configured is null
* Using DTO for channel configuration. Changing channel config parameter names to camel case

Signed-off-by: Haavar Valeur <haavar@haavar.com>

[remoteopenhab] Handle REFRESH command as any command (#13350)

The received command (REFRESH) is transmitted as a REFRESH command to
the remote item.

Signed-off-by: Laurent Garnier <lg.hc@free.fr>

[nuvo] Fix MPS4 flag and online status reporting (#13345)

* Fix mps4 flag and online status reporting
* Update missing statuses

Signed-off-by: Michael Lobstein <michael.lobstein@gmail.com>

[avmfritz] Allow to set every userdefined color (#13317)

* Added INCREASE/DECREASE commands for brightness/color Channels
* Fixed NPE in HeatingModel
* Use set unmapped color command for color control of bulbs

Signed-off-by: Christoph Weitkamp <github@christophweitkamp.de>

Update API URL. (#13306)

Signed-off-by: Stewart Cossey <stewart.cossey@gmail.com>

[mimictts] Use http method POST instead of GET (#13239)

* [mimictts] Use http method POST instead of GET

Using POST method allows longer request size.
Also, using InputStreamResponseListener avoid keeping the response in-memory

* [mimictts] quick fix for regression : providing length

Some audiosink needs it

Signed-off-by: Gwendal Roulleau <gwendal.roulleau@gmail.com>

New translations fineoffsetweatherstation.properties (Italian) (#13341)

Upgrade MySQL connector to 8.0.30 (#13242)

Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>

[fineoffsetweatherstation] Add support for the new GW2001 weather station (#13283)

* [fineoffsetweatherstation] add support for the new GW2001 weather station with its WH90 sensor
* [fineoffsetweatherstation] add missing channel labels
* [fineoffsetweatherstation] remove redundant translations
* [fineoffsetweatherstation] add test data + fix for WH90
* [fineoffsetweatherstation] fix wrong size for `CMD_READ_RAIN`

Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>

[boschindego] Add another status code for returning to dock (#13335)

Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>

[Konnected] Removed defaults for zone configuration parameter from the channels (#13333)

* Removed defaults from zone parameter
* Corrected the name of the zone property in example

Signed-off-by: Haavar Valeur <haavar@haavar.com>

[rrd4j] Use RrdDbPool to prevent ClosedByInterruptException (#13332)

Using the pool prevents exceptions like:

```
java.nio.channels.ClosedByInterruptException: null
at java.nio.channels.spi.AbstractInterruptibleChannel.end(AbstractInterruptibleChannel.java:199) ~[?:?]
at sun.nio.ch.FileChannelImpl.endBlocking(FileChannelImpl.java:162) ~[?:?]
at sun.nio.ch.FileChannelImpl.size(FileChannelImpl.java:388) ~[?:?]
at org.rrd4j.core.RrdNioBackend.<init>(RrdNioBackend.java:94) ~[?:?]
at org.rrd4j.core.RrdNioBackendFactory.open(RrdNioBackendFactory.java:163) ~[?:?]
at org.rrd4j.core.RrdBackendFactory.getBackend(RrdBackendFactory.java:521) ~[?:?]
at org.rrd4j.core.RrdDb.<init>(RrdDb.java:627) ~[?:?]
at org.rrd4j.core.RrdDb.of(RrdDb.java:500) ~[?:?]
at org.openhab.persistence.rrd4j.internal.RRD4jPersistenceService.getDB(RRD4jPersistenceService.java:323) ~[?:?]
at org.openhab.persistence.rrd4j.internal.RRD4jPersistenceService.store(RRD4jPersistenceService.java:141) ~[?:?]
at org.openhab.persistence.rrd4j.internal.RRD4jPersistenceService.lambda$0(RRD4jPersistenceService.java:211) ~[?:?]
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:515) [?:?]
at java.util.concurrent.FutureTask.run(FutureTask.java:264) [?:?]
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:304) [?:?]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) [?:?]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) [?:?]
at java.lang.Thread.run(Thread.java:829) [?:?]
```

Fixes #13297

Also includes a few code improvements.

Signed-off-by: Wouter Born <github@maindrain.net>

[Konnected] Fixed null pointer exception on state update with missing state (#13329)

* Fixed null pointer exception on state update with missing state
* Added variable for state. Changed onvalue configuration type to integer.

Signed-off-by: Haavar Valeur <haavar@haavar.com>

[jrubyscripting] avoid polluting environment when auto-installing gems (#13328)

fixes https://github.com/boc-tothefuture/openhab-jruby/issues/634;
regression from https://github.com/openhab/openhab-addons/pull/13151

Signed-Off-By: Cody Cutrer <cody@cutrer.us>

[fineoffsetweatherstation] Add information about unsupported devices (#13307)

* [fineoffsetweatherstation] add information about unsupported devices

Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>

[hdpowerview] Battery channels visible only when required (#13324)

* [hdpowerview] add batteryKind field
* [hdpowerview] battery channels visible depending on batteryKind

Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>

Nobø hub addon: Add more component types with serial numbers. (#13326)

Minor change which gives more properties to detected things, which
should make a little easyer for users with these devices to identify them.

Signed-off-by: Jørgen Austvik <jaustvik@acm.org>

[myStrom] Corrected readMe, mystrompir is not a bulb. (#13322)

* Corrected ReadMe, mystrompir is not a bulb.

Signed-off-by: Stefan Navratil <stefan@navratil.ch>

[wemo] Add Wemo Outdoor plug (#13319)

Signed-off-by: bill <git@billforsyth.net>

New translations mqtt.properties (Italian) (#13323)

[mqtt] Add missing broker connection configuration parameters (#13303)

Allows to configure the following broker connection configuration parameters:

* Protocol: TCP (default), WEBSOCKETS
* MQTT Version: V3 (default), V5
* Hostname Validation: true (default), false

The defaults are chosen to remain backwards compatible.

Signed-off-by: Wouter Born <github@maindrain.net>

[mail] Correct action names (#13318)

Signed-off-by: Mark Herwege <mark.herwege@telenet.be>

[bluetooth] Add support for service data (#10278)

Signed-off-by: Peter Rosenberg <prosenb.dev@gmail.com>

New translations mercedesme.properties (Italian) (#13312)

[mercedesme] Initial contribution (#13044)

Signed-off-by: Bernd Weymann <bernd.weymann@gmail.com>

[hdpowerview] Channels are visible depending on shade capabilities (#13275)

* [hdpowerview] create channels dynamically
* [hdpowerview] revert from channel creation to channel removal
* [hdpowerview] add category

Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>

[nobohub] Initial contribution (#12937)

* Added NoboHub binding.

Signed-off-by: Espen Fossen <espenaf@junta.no>

[lutron] Add mDNS discovery for RadioRA 3 processor (#13299)

Signed-off-by: Bob Adair <bob.github@att.net>

[jrubyscripting] document how to use Ruby in a transformation (#13286)

using the core ScriptTransformationService. See
https://github.com/openhab/openhab-addons/pull/13255 for prior
discussion on this.

Signed-off-by: Cody Cutrer <cody@cutrer.us>

Adapt to AccessTokenResponse API change (#13278)

Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>

[smhi] Prepare for easier translation (#13305)

Signed-off-by: Anders Alfredsson <andersb86@gmail.com>

Setting auto discovered callback URL in configuration. Cleaned up callback URL handling (#13295)

Signed-off-by: Haavar Valeur <haavar@haavar.com>

New translations fineoffsetweatherstation.properties (Italian) (#13300)

[Konnected] Refreshed readme to include latest changes (#13294)

* Refreshed readme to include latest changes

Signed-off-by: Haavar Valeur <haavar@haavar.com>

[transformation.jinja] Update jinjava to 2.6.0 from 2.5.7 (#13296)

Signed-off-by: Sami Salonen <ssalonen@gmail.com>

New Crowdin updates (#13291)

* New translations shelly.properties (German)
* New translations goecharger.properties (Italian)

[fineoffsetweatherstation] Add channel for the sensors battery voltage (#13284)

* [fineoffsetweatherstation] add channel for the sensors battery voltage

Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>

Solves issue #13196 (#13281)

Signed-off-by: clinique <gael@lhopital.org>

Add transaction to Go-Echarger (#13105)

Signed-off-by: Sascha Kloß <sascha.kloss@gmx.de>

[jrubyscripting] Update to jruby 9.3.7.0 to fix BootstrapMethodError (#13280)

* [jrubyscripting] Update to jruby 9.3.7.0
* [jrubyscripting] Exception fixed in jruby 9.3.7.0

The BootstrapMethodError should no longer be thrown by jruby since 9.3.7. Fixed in https://github.com/jruby/jruby/pull/7271

Signed-off-by: Jimmy Tanagra <jcode@tanagra.id.au>

return rollershutter pos (#13191)

Signed-off-by: Tobias Lange <vich-667@gmx.de>

[Hydrawise] concurrent error (#13268)

* Fixes a concurrent modification exception, cleans up handler on dispose, fixes totally broken last contact channel
Fixes #13094

Signed-off-by: Dan Cunningham <dan@digitaldan.com>

[tado] Fix AC target temperature reading and writing bugs (#13272)

* [tado] fix npe when target temperature json element is missing
* [tado] apply temperature command/value restrictions

Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>

Refresh token if expired (#13274)

Signed-off-by: Boris Krivonog <boris.krivonog@inova.si>

[automower] Adapt login due to Husqvarna API change (#13263)

* The Automower Connect API Authentication does not work anymore as they moved to a new authentication method. (AppKey and AppSecret) - adopted. Fixes issue #12980.

Signed-off-by: Boris Krivonog <boris.krivonog@inova.si>

New translations boschindego.properties (Danish) (#13269)

[serial] Allow custom baudrate and add option 2400 (#13265)

Fix #13131

Signed-off-by: Laurent Garnier <lg.hc@free.fr>

[velux] Add an action to simultaneously set main and vane positions (#13199)

* [velux] add moveMainAndVane action
* [velux] add claridications to read me
* [velux] refactor actions and translate
* [velux] fix thing lookup

Signed-off-by: Andrew Fiddian-Green <software@whitebear.ch>

[miio] adding support for ijai.vacuum.v19 : Xiaomi Vacuum Mop 2S (#12723)

Signed-off-by: Tiller <github.me@tiller.fr>