Andreas Berger [Mon, 25 Jul 2022 14:39:52 +0000 (16:39 +0200)]
[fineoffsetweatherstation] Add support for ELV protocol (#13138)
* [fineoffsetweatherstation] add support for ELV protocol
* [fineoffsetweatherstation] remove german translations
* [fineoffsetweatherstation] add representationProperty for gateway, fix unit of irradiation-uv
* [fineoffsetweatherstation] add representationProperties in descriptor xml file
* [fineoffsetweatherstation] set channels values to undef in case of communication errors
* [fineoffsetweatherstation] use lock for request synchronisation
* [fineoffsetweatherstation] marke sensors as gone, if they got unpaired
resolves #12763
Signed-off-by: Andreas Berger <andreas@berger-freelancer.com>
[rotel] Add support of multiple zones (ASCII protocol) (#13136)
* [rotel] Add support of multiple zones (ASCII protocol)
Models C8 and C8+ (distribution amplifiers)
Code factorization.
Simulator updated.
* Set model/firmware thing properties (ASCII V2 protocol)
* Review comment: NumberOf rather than Nb
* Review comment: getZoneCommand: IllegalArgumentException if numZone is
outside 1-4
* Review comment: constant for volumeUpDown
* Simplification: method isPowerOn with numZone parameter (range 0-4)
* Review comment: fix for getPowerOffCommand
* Review comment: new method isZoneAvailable to factorize code
* Review comment: use MAX_NUMBER_OF_ZONES to check range validity
Venstar: split away and schedule settings calls (#13046)
Separate Venstar thermostat API calls to change the away mode or
schedule-enabled mode so that the POST to the thermostat's REST
API settings endpoint contains only one of these two params.
Newer ColorTouch thermostat firmwares will reject any POSTs to the
settings endpoint that include the 'schedule' parameter when the
thermostat is currently in AWAY mode, regardless of the value
passed for 'schedule'. This had the effect of preventing the
OpenHab binding from un-setting away mode.
Signed-off-by: David Eberhart <git@daveeberhart.com>
* New translations astro.properties (Hungarian)
* New translations chromecast.properties (Hungarian)
* New translations darksky.properties (Hungarian)
* New translations coronastats.properties (Hungarian)
* New translations evohome.properties (Hungarian)
* New translations mcd.properties (Italian)
* New translations amazondashbutton.properties (Italian)
* New translations openwebnet.properties (Italian)
* New translations openhabcloud.properties (Italian)
* New translations voicerss.properties (Italian)
* New translations tado.properties (Italian)
* New translations wled.properties (Italian)
* New translations livisismarthome.properties (Italian)
Markus Michels [Tue, 19 Jul 2022 17:37:06 +0000 (19:37 +0200)]
[shelly] Auto-numbering for channel labels & bugfixes (#13066)
* - new device types added
- min firmware set to 1.8.2
- unit for gas concentration fixed (ppm)
- Auto numbering on channel labels for groups with multiple instances
(add sequence suffix)
- API and Thing interfaces defined to restrict access to those classes
- fix on TRV boost update via CoAP
- fix for status.temperature and status.uptime, internalTemp channels
- don’t use meter timestamp if not present (RGBW2)
- low battery indicator for sensor devices fixed
- device detection based on model/type improved
- various messages/translations fixed/improved
- README updated (missing thing types added)
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017) Signed-off-by: Markus Michels <markus7017@gmail.com>
* missing properties added
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017) Signed-off-by: Markus Michels <markus7017@gmail.com>
* minor changes
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017) Signed-off-by: Markus Michels <markus7017@gmail.com>
* markdown fixed
Signed-off-by: Markus Michels <markus7017@gmail.com> (github: markus7017) Signed-off-by: Markus Michels <markus7017@gmail.com>
* review changes applied
Signed-off-by: Markus Michels <markus7017@gmail.com>
* shelly_de.properties restored from main branch
Signed-off-by: Markus Michels <markus7017@gmail.com>
Also, fix possible race condition during connecting, when the PC coupler is not connected to the LCN data wire.
Replace discontinued LCN-PKE by LCN-VISU.
Signed-off-by: Fabian Wolter <github@fabian-wolter.de>
Wouter Born [Sun, 10 Jul 2022 13:15:26 +0000 (15:15 +0200)]
Move Eclipse m2e configuration to a profile (#13098)
This prevents the following warnings when executing: `mvn i18n:generate-default-translations`
[WARNING] The POM for org.eclipse.m2e:lifecycle-mapping:jar:1.0.0 is missing, no dependency information available
[WARNING] Failed to retrieve plugin descriptor for org.eclipse.m2e:lifecycle-mapping:1.0.0: Plugin org.eclipse.m2e:lifecycle-mapping:1.0.0 or one of its dependencies could not be resolved: org.eclipse.m2e:lifecycle-mapping:jar:1.0.0 was not found in https://openhab.jfrog.io/openhab/libs-snapshot during a previous attempt. This failure was cached in the local repository and resolution is not reattempted until the update interval of openhab-snapshot has elapsed or updates are forced
Dan Cunningham [Mon, 4 Jul 2022 21:09:35 +0000 (14:09 -0700)]
[openhabcloud] Makes the baseURL and item updates options advanced... (#13078)
* [openhabcloud] Makes the baseURL and item updates options advanced, cleans up documentation, disabled sending updates to the community myopenHAB.org service.
Fixes #12582
Signed-off-by: Dan Cunningham <dan@digitaldan.com>
[dsmr] Fix incorrect deriving of sub channel names when updating channels (#13076)
Subchannels were created by appending the key. However this was done inside a loop and if multiple updates were needed they would be appended to the channel name, instead of taking the channel name each time. Signed-off-by: Hilbrand Bouwkamp <hilbrand@h72.nl>
* New translations enigma2.properties (Norwegian)
* New translations enigma2.properties (Hungarian)
* New translations enigma2.properties (Norwegian)
* New translations iCloud.properties (Finnish)
* New translations tradfri.properties (Finnish)
* New translations map.properties (Finnish)
* New translations googletts.properties (German)
* New translations voicerss.properties (Finnish)
* New translations xmltv.properties (Finnish)
* New translations exec.properties (Finnish)
* New translations jinja.properties (Finnish)
* New translations js.properties (Finnish)
* New translations regex.properties (Finnish)
* New translations jsonpath.properties (Finnish)
* New translations scale.properties (Finnish)
* New translations xslt.properties (Finnish)
* New translations xpath.properties (Finnish)
* New translations opensprinkler.properties (Finnish)
* New translations porcupineks.properties (Finnish)
* New translations netatmo.properties (Finnish)
* New translations imperihome.properties (Finnish)
Dan Cunningham [Mon, 4 Jul 2022 19:46:38 +0000 (12:46 -0700)]
[iaqualink] Fix to work with recent API changes to the iAqualink cloud service. Currently the binding throws a gson parsing error early in the poll process rendering it completly broken. (#13073)
Signed-off-by: Dan Cunningham <dan@digitaldan.com>
[pidcontroller] Implement previous state recovery on startup (#13003)
* [pidcontroller] Implement previous state recovery on startup
This feature allows the PID controller parameters to be updated and
OpenHAB to be restarted without losing the current controller state.
This is especially important for systems with a long response time.
For example it might take up to a day for an underfloor heating
controller to stabilise after losing state and having to build up
the integrator value from zero.
* New translations googletts.properties (French)
* New translations googletts.properties (German)
* New translations googlestt.properties (German)
* New translations googlestt.properties (French)
Sebastian P [Fri, 1 Jul 2022 06:11:00 +0000 (08:11 +0200)]
[dali] Implement DT8 (single-channel RGB & color temperature) device type (#12955)
* DALI: Implement DT8 (single-channel RGB & color temperature) device type, fix device and group addressing
* dali: Store BridgeHandler in a local variable instead of retrieving it over and over again.
* dali: Follow logging guidelines.
Signed-off-by: Sebastian Philipp <github-ebqurd@s3lph.me>
Wouter Born [Mon, 27 Jun 2022 20:30:40 +0000 (22:30 +0200)]
GitHub Actions workflow improvements (#13018)
* Upgrade actions to latest versions
* Upgrade Maven to 3.8.6
* Use Temurin JDK instead of Zulu JDK
The Temurin JDK is preinstalled in the [Ubuntu image](https://github.com/actions/virtual-environments/blob/main/images/linux/Ubuntu2004-Readme.md#java) whereas the Zulu JDK first need to be downloaded.
It should also perform better because the Temurin JDK is linked to glibc 2.12 whereas the Zulu JDK is linked to glibc 2.5.
openhab-bot [Sun, 26 Jun 2022 16:14:07 +0000 (18:14 +0200)]
New Crowdin updates (#13021)
* New translations boschindego.properties (Danish)
* New translations remoteopenhab.properties (German)
* New translations remoteopenhab.properties (Hungarian)
Holger Friedrich [Sun, 26 Jun 2022 15:22:56 +0000 (17:22 +0200)]
[knx] Allow all port names for serial interfaces (#13019)
Starting with openHAB 3.3, the framework enforces using serial
ports which are detected by the system by default. This feature
is now disabled for the KNX addon to allow using symlinks to
ports as well. Refers-to: openhab/openhab-core#3014 Signed-off-by: Holger Friedrich <mail@holger-friedrich.de>
projects / openhab-addons.git / log