Jacob Laursen [Mon, 24 Jan 2022 20:26:35 +0000 (21:26 +0100)]
[wemo] Refactor duplicated code (#12101)
* Extract getHost() and getUDN() to common handler base class.
* Delete AbstractWemoHandler as it serves no purpose.
* Extract isUpnpDeviceRegistered() to base class.
* Fix typo.
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
Cody Cutrer [Sun, 23 Jan 2022 12:40:14 +0000 (05:40 -0700)]
[homekit] use quantity type conversions for temperature characteristics (#12083)
if an Item associated with a temperature characteristic has a QuantityType
(of dimension Temperature) as its state, regardless of current unit,
use that to convert to celsius instead of any other configuration.
Note that this is only for supply values to HomeKit; commands coming from
HomeKit will still send a DecimalType with units according to the HomeKit-wide
useFahrenheit configuration.
Marcel [Sat, 22 Jan 2022 17:57:01 +0000 (18:57 +0100)]
[miio] Implement lumi devices support for gateways (#11688)
* [miio] Implement lumi devices support for gateways v3 WIP
Adding support for the following models:
* Aqara LED Light Bulb (Tunable White) (modelId: lumi.light.aqcn02)
* IKEA E27 white spectrum opal (modelId: ikea.light.led1545g12)
* IKEA E27 white spectrum clear (modelId: ikea.light.led1546g12)
* IKEA E14 white spectrum (modelId: ikea.light.led1536g5)
* IKEA GU10 white spectrum (modelId: ikea.light.led1537r6)
* IKEA E27 warm white (modelId: ikea.light.led1623g12)
* IKEA GU10 warm white (modelId: ikea.light.led1650r5)
* IKEA E14 warm white (modelId: ikea.light.led1649c5)
* Door lock (modelId: lumi.lock.v1)
* Aqara Door Lock (modelId: lumi.lock.aq1)
* Aqara Door Lock S2 (modelId: lumi.lock.acn02)
* Aqara Door lock S2 Pro (modelId: lumi.lock.acn03)
* Mi Smart Plug (Zigbee) (modelId: lumi.plug.mmeu01)
* Mi Temperature and Humidity Sensor (modelId: lumi.sensor_ht.v1)
* Mi Window and Door Sensor (modelId: lumi.sensor_magnet.v2)
* Mi Motion Sensor (modelId: lumi.sensor_motion.v2)
* Water Leak Sensor (modelId: lumi.sensor_wleak.aq1)
* Aqara Temperature and Humidity Sensor (modelId: lumi.weather.v1)
Signed-off-by: Marcel Verpaalen <marcel@verpaalen.com>
* Work in progress support plug
Matt Filetto [Wed, 19 Jan 2022 17:15:22 +0000 (09:15 -0800)]
[onkyo] Add support for TX-NR609 (#12067)
* binding: [onkyo]: add TX-NR609
* Basically a 616 but with some THX Listening Modes not on other models
* [onkyo]: add "PLIIx Music + THX Music" Listening Mode
Signed-off-by: Matt Filetto <matt.filetto@gmail.com>
Jacob Laursen [Mon, 17 Jan 2022 12:41:33 +0000 (13:41 +0100)]
[hdpowerview] Refactor dynamic channels (#11853)
* Extract dynamic channel creation to separate classes.
* Avoid double list allocations.
* Add test coverage for scenarios with no channels built.
* Extract common builder stuff to super class.
* Fix grammar.
* Reduce constructor access modifiers.
* Removed unneeded this keyword for protected method.
* Fix null annotation issues.
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
Jacob Laursen [Fri, 14 Jan 2022 21:59:01 +0000 (22:59 +0100)]
[hdpowerview] Add support for calibrating a shade (#12002)
* Add support for calibrating a shade.
Fixes #11767
* Fix startup problems by decoupling capabilities cache from updateSoftProperties.
* Minor refactoring of capabilities and shade id handling.
* Dispose faster/safer by killing any remaining tasks.
* Set shade thing status to UNKNOWN until we receive any data for shade.
* Fix position update glitch after setting position.
* Remove unneeded catch after shade id refactoring.
* Document return values in Javadoc.
* Avoid logging InterruptedException during dispose.
* Add calibration example item.
* Reduce nesting.
* Add myself as reviewer for binding.
* Add Andrew Fiddian-Green as reviewer for binding.
* Handle JsonParseException.
* Fix alphabetic order.
Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
alexf2015 [Fri, 14 Jan 2022 07:38:20 +0000 (08:38 +0100)]
[digitalstrom] Adoptions due to API changes in DSS Update 1.19.2 (#12033)
* added support for DSUID in DSS response data while being compatible to removed DSID which might still be in use due to older firmware versions.
* fixed a NPE and also fixed json parameter naming.
* applied improvements from DSUID class
* fixed variable name, made dsid member final, added author
Signed-off-by: Alexander Friese <af944580@googlemail.com>
Udo Hartmann [Wed, 12 Jan 2022 20:09:42 +0000 (21:09 +0100)]
[knx] Update README.md (#12035)
Changed Example of Dimmer channel. Makes no sense to provide both Switch and Position Status in configuration, as an update of Switch Status will delete Position and vice versa. Position Status makes sense.
dalgwen [Fri, 7 Jan 2022 23:44:28 +0000 (00:44 +0100)]
[googletts] Use returned sound to get play informations (#11877)
* [googletts] Use real sound returned to get play informations (#10015)
When google tts returns a wav file, it is now parsed to get correct informations about it.(mandatory for playing it with at least the System speaker audio sink)
Close #10015
* Fix a regression, as the WAV fix was incorrectly applied to the MP3 file
After a restart of openHAB the function 'getScanTimeout()' is called before the member 'installModeDuration' has been initialized with the correct value from the configuration. With a large number of Homematic devices, the default value of 'installModeDuration' is too small to read in all Homematic devices from the CCU.
Therefore, when calling the function 'getScanTimeout()', the value is read directly from the configuration. The member 'installModeDuration' has been removed.
Matt [Mon, 3 Jan 2022 15:49:36 +0000 (10:49 -0500)]
[haywardomnilogic] Added filter & pump RPM & state channels (#11223)
* Update unit formating
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Updates per last review
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Updated units to decimal
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Removed erroneous chlorinator code from filterhandler
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Adding pump support, added body of water to xml paths to prevent detection of terminal or other items
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Added getApiDef call to initialize when debug=trace
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Fixed typo on README
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Cleanup pump xml spotless checks
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Fix typos in README
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Fixed a couple typos in pump discovery
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Fixed README typo
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Fix untested pump typos
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Fix pump typo
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Add thing properties and max filter/pump speed command
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Add support for relays to exist in the backyard
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Update README
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Add support for colorLogicLights to exist in the backyard
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Remove sensor thing and associated handler. Hayward does not expose data for stand alone sensors. Packaged in other things (backyard air temp, body of water temp, etc.)
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Added heater states
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Updated heater state in readme
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Added dynamic state description updates to set pump & filter minimum and maximum speeds.
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Moved dynamicStateDescription updates to thing initialize routine
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Code checks
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Add min/max limits to filter, pump and heater setpoints
Signed-off-by: Matt Myers <mmyers75@icloud.com>
* Add virtual heater dynamic state descriptions. Change filter & pump speeds back to number:dimensionless
Björn Lange [Mon, 3 Jan 2022 15:16:01 +0000 (16:16 +0100)]
[mielecloud] Fix mockito concurrency issues in integration tests (#11742)
* Move bridge and thing setup into individual integration tests
* Ensure that mocks used by ThingHandlers are fully initialized prior to
creating the thing handlers
* Ensure that bridge and thing are linked together after thing creation in
integration tests
Signed-off-by: Björn Lange <bjoern.lange@tu-dortmund.de>
openhab-bot [Mon, 3 Jan 2022 15:00:47 +0000 (16:00 +0100)]
New Crowdin updates (#11890)
* New translations adorne.properties (German)
* New translations ahawastecollection.properties (German)
* New translations airquality.properties (German)
* New translations airvisualnode.properties (German)
* New translations amazonechocontrol.properties (German)
* New translations astro.properties (Finnish)
* New translations astro.properties (French)
* New translations bosesoundtouch.properties (German)
* New translations chromecast.properties (German)
* New translations denonmarantz.properties (German)
* New translations exec.properties (German)
* New translations hue.properties (French)
* New translations icalendar.properties (German)
* New translations jruby.properties (German)
* New translations jruby.properties (Italian)
* New translations luxtronikheatpump.properties (German)
* New translations mielecloud.properties (German)
* New translations openuv.properties (French)
* New translations openweathermap.properties (German)
* New translations phc.properties (German)
* New translations powermax.properties (French)
* New translations pushsafer.properties (German)
* New translations rotel.properties (French)
* New translations tradfri.properties (French)
Sami Salonen [Mon, 3 Jan 2022 13:07:45 +0000 (15:07 +0200)]
[dynamodb] AWS SDK updated to 2.17.102 (#11914)
* [dynamodb] Update guide for updating the SDK
Some steps were obsolete and required corrections.
Signed-off-by: Sami Salonen <ssalonen@gmail.com>
* [dynamodb] Update AWS SDK to 2.17.102
- Added NOTICE with all compiled dependencies. Dependencies listed in
feature.xml are omitted.
- jackson dependency is now provided by AWS SDK as a 'shaded' copy
- log4j version used in tests updated
- Specifying DefaultsMode=STANDARD to make the SDK utilize latest
recommended parameters. RetryMode is also controlled by DefaultsMode,
so we avoid setting it explicitly unless overridden by the user.
- Fixed test regressions due to SDK changes
projects / openhab-addons.git / log